Home > Faroudja > Projector > Faroudja Fdp-Dlphd20 Specifications

Faroudja Fdp-Dlphd20 Specifications

    Download as PDF Print this page Share this page

    Have a look at the manual Faroudja Fdp-Dlphd20 Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10 Faroudja manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							FDP-DLPHD20
    Home Theater Optimized Digital Projector
    For even greater image quality,
    the NRS-DVI or DVP1500
    processor are available as 
    a package so all sources are
    converted to progressive
    digital DVI signals and sent 
    to the projector.
    Digital
    projector
    package
    High performance home 
    theater now has an elegant and 
    simple solution. The FDP-DLPHD20 is a
    complete display system that starts with an
    internal Faroudja video processing stage where
    all sources are converted to very high quality
    signals that are sent to the display engine.
    The display engine is a special design to improve 
    critical black levels resulting in a contrast ratio of 
    2800:1. The 1280x720 DLP HD2+ chip provides 
    sharp images for both video and HDTV on 
    16:9 aspect ratio screens.
    A new six-segment color wheel, powered zoom 
    and focus, quiet operation and sleek cabinet design
    complete the product. Faroudja engineering provides
    the final critical step by fine-tuning the settings to
    optimize the projector for home theater use.
    The final image is full of stunning detail and color 
    with excellent contrast ratio.
    High performance home theater was never so elegant! 
    						
    							OPTICAL
    Projection system:  optical engine based on 1 DM D™
    HD2+ chip, sealed housing, dust proof
    DMD panel:  resolution 1280x720 pixel
    Brightness uniformity:  10% above or below the average
    Contrast ratio:  > 2800:1 (full 0n / full off )
    Projection lens:  zoom, 12 elements AR multilayer
    coating, motorized focus and zoom,
    manual 8% lens shift
    Aperture f#:  2.7 (zoom max) - 3.3 (zoom min)
    Picture size:  50-250 inches (diagonal measure)
    Aspect ratio:  4/3 and 16/9
    Throw ratio:  1.8:1 - 2.5:1
    (throw distance: picture width)
    Focus range:  2.2 - 13.0 m (7’ 3” - 42’ 8”)
    Throw Distance:  60” : 2.4m - 3.3m (7’ 11” - 10’ 10”) 80” :
    3.2m - 4.4m (10’ 6” - 14’ 5”) 100” : 4.0m -
    5.5m (13’ 2” - 18’ 1”)
    Keystone adjustment:  up to 26°(optical: ± 8° digital: ±18°)
    Lamp:  120 W U H P
    Lamp life time:  8000 hours (average value measured in
    the laboratory under optimal
    conditions; lamp hours can be reduced
    if unit is misused)
    ELECTRICAL
    Input Signals:  CVBS on RCA/Phono type connector S-
    VHS on Mini-DI N connector RGBHV on
    DB15HD connector RGBS / YCrCb on
    RCA/ Phono type connector DVI-D
    Horizontal frequency:  from 15 to 80 kHz (up to to UXGA
    format @ 60 Hz)
    Vertical frequency:  40-100 Hz
    Video standards :  automatically selected (PAL B,G,H, I,
    M,N,60, SECAM, NTSC 3.58, 4.43)
    High definition video:  ATSC H DTV (480p, 720p, 1080i)
    Graphic standards :  VGA, SVGA, XGA, SXGA, UXGA
    Deinterlacer:  Faroudja chip set, DCDi™, 3:2 pull
    down sequence conversion
    Colour temperature:  adjustable from 5000 to 9300 degrees K.
    Separate memories for video and high
    resolution inputs - prealigned by Faroudja.Video processor:  DTI, CTI, comb filter, noise reduction.
    Sharpness, Y/C delay and NTSC tint
    adjustments
    Remote control:  via infrared remote control and 
    via computer through RS232 
    serial interface
    Remote inputs:  via Remote Inputs Interface (optional)
    and cable with EVC connector
    Low Voltage Power Output:  two 12 Vdc output, 100 mA max on
    jack connectors
    GENERAL
    Supply:  from 100 to 240 Vac, -10% +6%
    tolerance
    Frequency:  from 48 to 62 Hz
    Consumption:  180 W max
    Fuse:  T 3.15A H, 5 x 20 mm
    Dimensions of projector:  352 mm x 174 mm x 318 mm (LxHxD)
    13”-7/8 x 6”-7/8 x 12”-1/2 (LxHxD)
    Weight of projector:  12.8 lbs. (5.8 kg)
    Packaging and  400 mm x 275 mm x 405 mm (LxHxD)
    gross weight:  1’ 4” x 11” x 1’ 4” (LxHxD) double
    reinforced carton; expandable anti-
    shock packaging; gross weight,
    including accessories: 8 kg (17.7 lbs);
    recyclable packaging material
    ENVIRONMENTAL
    Operation temperature:  0 to 35°C (32° to 95°F)
    Transportation temp.:  -10 to 55°C (14° to 131°F)
    Storage temperature:  -10 to 55°C (14° to 131°F)
    Humidity:  10% to 90% relative humidity
    noncondensing
    Safety:  E N 60950, U L 60950
    Transportability: desktop equipment
    Electromagnetic  E N 55022 Class B
    compatibility: E N 55024
    EN 61000-3-2
    EN 61000-3-3
    Transportation:  I EC 68-2-31, I EC 68-2-32
    Please visit our website at www.faroudja.com
    750 Palomar Avenue  •  Sunnyvale  •  CA 94085  •  Phone: (408)735-1492
    Fax: (408)735-1571  •  Email: [email protected]
    A division of Genesis Microchip Inc. 
    						
    All Faroudja manuals Comments (0)

    Related Manuals for Faroudja Fdp-Dlphd20 Specifications