Faroudja Fdp-Dlphd20 User And Installation Manual Manual

18
IMAGE
This menu features adjustments relating to picture position,
aspect ratio, etc.
ASPECT
This adjustment allows you to change the dimensions and
aspect ratio (relationship between width and height) of the
displayed image. There are five preset aspects available and
three personalised aspects (with user-settable parameters). You
can select a different aspect for each source: the selected
aspect ratio will be automatically called the next time the rela-
tive source is called.
You can also select the...

19 most suitable values.
However, if the image is not perfectly centralised it may prove
useful to request the system to repeat the input signal analysis
and image positioning, calling the automatic control procedu-
re from the AUTO button on the remote control or keypad. When
this procedure is called it is helpful to have a white or light
coloured background on the screen in the current picture.
FREQUENCY/PHASE
These adjustments, available for progressive signals and for
signals from PC, ensure...

20
SETUP
The setup menu contains less frequently used adjustments that
may be required during installation (e.g. On Screen Display
language selection or the display of Test Patterns).
ORIENTATION
Select the option that best describes the installation i.e. desktop
front, ceiling front, desktop rear and ceiling rear.
DIGITAL 
INPUTAUD
IO
O
UTZ
OO
MC
ONT
RO
L (RS 
232) GR
APH
ICS
 
RGBR
/C
r
G/
Y
B
/C
bHV1
2435ATT
ENTI
ON
: pou
r
 ne
 pas
 compr
omett
r
e
 
la 
pr
otection
 
cont
re
 les
 
resque
 dincende...

21 In the initial phase of installation the configurable keys (F1, F2)
serve as optical zoom and optical focus 
(Fig.32).
POWER ON
If active (AUTO) allows to power up the system directly from the
power feeder, once the initializing phase is completed.
If not active 
(STAND-BY) once the initializing phase is completed
the system remains in a stand-by mode waiting to receive the
power on command from the remote control or the key pad.
TEST PATTERNS
Displays a series of five test patterns, useful for the...

22 The text insertion mode remains the same if text is being inserted
for the first time or if a previously inserted name is being edited.
The letter insertion can be done in any available position
(represented by horizontal lines).
Use the  and  keys to move between letters either left or
right respectively.
Press the numeric key matching the letter 
(Fig. 34), the first
click of the key selects the first letter, the second click the
second letter and so on.
The available letters are shown in the text...

23
MEMORIES
The main parameters of the image may be saved in distinct
groups of values (known as ‘Memories’); these parameters can
subsequently be applied all together by way of a single com-
mand.
There are 3 distinct Memories (Memory 1, Memory 2, Memory
3)  for each of the 8 signal types managed:
3  COMP/RGB(YCrCb 15KHz) 3  COMP/RGB(RGB 15KHz) 
3  COMP/RGB(YCrCb) 
3  COMP/RGB(RGB) 
4  GRAPHICS RGB 
5  DIGITAL INPUT1  VIDEO  
2  S-VIDEO  
making a total of 24 different available Memories.
The image...

24
10   CLEANING AND MAINTENANCE
The projector does not require internal cleaning. There are no
user serviceable parts inside the projector.  Please refer all
service requirements to qualified personnel.
Cleaning the projector’s cover:
Use a soft slightly damp cloth. Do not use abrasive cleaners,
solvents or other harsh chemicals, as this will damage the finish
of the cover. Avoid direct cleaning of the rear panel’s screen-printing.
Cleaning the lens:
The lens may be cleaned with a very soft,...

25
11   TROUBLESHOOTING GUIDE
No power  (Green and red LED are OFF)
- Check the power switch at the rear: it must be in position I.
- Check if the power cable has been connected correctly to a
working socket.
- Check the power socket fuse, at the rear of the projector.
- Replace the fuse on the mains socket with an identical type
(T 3.15A H) 
(Fig. 2).
- Should the problem persist, seek authorised technical
assistance.
The lamp is not coming on
- Allow a few minutes pause between switching off and...

26You can purchase the following optional accessories at your
Dealer:
- Wall/Ceiling Bracket Kit.
Use only original, or Faroudja approved, accessories.
12   OPTIONAL ACCESSORIES
CAUTION: for ceiling/wall installation, by means of
suspension bracket, carefully follow the instructions
and safety instructions recommended by the
Manufacturer in the bracket’s literature. Video Image showing colour misalignment on vertical
details
- Verify compatibility of video/graphic signals with technical
specifications of...

27
A   TECHNICAL SPECIFICATIONS
OPTICAL
Projection system:optical engine based on 1 DMD™
HD2+ chip, sealed housing, dusty proof
DMD™ panel: resolution 1280x720 pixel
Brightness uniformity: 10% above or below the average
Contrast ratio: > 2800:1 (full On / full Off)
Projection lens:zoom, 12 elements AR multilayer
coating, motorized focus and zoom,
manual elevation
Aperture f#: 2.7 (zoom max) - 3.3 (zoom min)
Picture size: 50-250 inches (diagonal measure)
Aspect ratio: 4/3 and 16/9
Throw ratio: 1.8:1 -...