Fujifilm Camera Finepix Xp200 Owners Manual

							11 First  Steps
Inserting the Battery and a Memory Card
    Removing the Battery and Memory Card  Removing the Battery and Memory Card
Before removing the battery or memory card,  turn the camera off and open the 
battery-chamber cover.
To remove the battery, press the battery latch to the side, and 
slide the battery out of the camera as shown.
Battery latch
To remove the memory card, press it in and release it slowly.  
The card can then be removed by hand.  When a memory card 
is removed, the card could come out of the slot too quickly.  
Use your finger to hold it and gently release the card. 
						

							12 First  Steps
Inserting the Battery and a Memory Card
 
■  Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved 
for use in the camera.  A complete list of approved memory cards is available 
at  http://www.fujifilm.com/support/digital_cameras/compatibility/ .  Operation 
is not guaranteed with other cards.  The camera can not be used with  xD-
Picture Cards or MultiMediaCard (MMC) devices.
  QQMemory CardsMemory Cards
•  Do not turn the camera off or remove the memory card while the memory card is 
being formatted or data are being recorded to or deleted from the card .  Failure to 
observe this precaution could damage the card.
• Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all  memory cards after using them in a computer or other device.  For more information 
on formatting memory cards, see “K  FORMAT” (P 91).
•  Memory cards are small and can be swallowed; keep out of reach of children.  If a  child swallows a memory card, seek medical assistance immediately.
•  miniSD or microSD adapters that are larger or smaller than the standard dimensions  of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take 
the camera to an authorized service representative.  Do not forcibly remove the card.
•  Do not affix labels to memory cards.  Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory  card. Use a H card or better when shooting HD or high-speed movies. 
						

							13 First  Steps
Inserting the Battery and a Memory Card
•  The data in internal memory may be erased or corrupted when the camera is repaired.  Please note that the repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in  which pictures are stored.  Do not rename or delete this folder or use a computer or 
other device to edit, delete, or rename image files.  Always use the camera to delete 
pictures from memory cards and internal memory; before editing or renaming files, 
copy them to a computer and edit or rename the copies, not the originals.
  QQBatteriesBatteries
•  Remove dirt from the battery terminals with a clean, dry cloth.  Failure to observe this  precaution could prevent the battery from charging.
•  Do not affix stickers or other objects to the battery.  Failure to observe this precaution  could make it impossible to remove the battery from the camera.
•  Do not short the battery terminals.  The battery could overheat.
•  Read the cautions in “ The Battery and Power Supply” ( P vi).
•  Use only battery chargers designated for use with the battery.  Failure to observe this  precaution could result in product malfunction.
•  Do not remove the labels from the battery or attempt to split or peel the outer casing.
•  The battery gradually loses its charge when not in use.  Charge the battery one or  two days before use. 
						

							14 First  Steps
 Charging the Battery Charging the Battery
The battery is not charged at shipment.  Charge the battery before use.  The 
camera charges the battery internally.
   1  Attach the plug adapter to the AC power adapter.Attach the plug adapter as shown, making 
sure that it is fully inserted and clicks into 
place on the AC power adapter terminals.
 
Q The plug adapter is exclusively for use with the 
supplied AC power adapter.  Do not use it with 
other devices.AC power adapter 
Plug adapter
   2  Charge the battery.
Turn the camera off and connect the camera 
to the supplied AC power adapter using the 
supplied USB cable.  Then plug the AC power 
adapter into an indoor power outlet.
 
Q Be sure the connectors are in the correct 
orientation and then insert them fully. 
						

							15 First  Steps
Charging the Battery
    The Self-timer Lamp  The Self-timer Lamp
The self-timer lamp shows battery charge status as follows:
Self-timer lampSelf-timer lampBattery statusBattery statusActionAction
OnOnBattery charging.Battery charging.——
BlinksBlinksBattery fault.Battery fault.See page See page 103..
OffOff
Charging complete.Charging complete.——
 Can not charge. Can not charge. Unplug the AC power adapter from the power outlet 
and reinsert the battery in the correct orientation 
(P 
103).
 
Q The battery will not charge while the camera is on. 
						

							16 First  Steps
Charging the Battery
  Charging via a computer  Charging via a computer
The battery can be charged by connecting the camera to a computer.
Turn the camera off and connect the supplied 
USB cable as shown, making sure the 
connectors are fully inserted.  Connect the 
camera directly to the computer; do not use a 
USB hub or keyboard.
 
Q If the camera is turned on, charging is not available.
 
Q If the computer goes into sleep mode while charging, charging will stop.  To 
continue charging, disable sleep mode on the computer, and disconnect and 
connect the USB cable.
 
Q Charging may be impossible depending on computer specifications, settings or 
conditions. 
						

							17 First  Steps
 Turning the Camera on and Off Turning the Camera on and Off
Shooting ModeShooting Mode
Press the ON/OFF button to turn the 
camera on.
Press ON/OFF again to turn the camera 
off.
  RRSwitching to Playback ModeSwitching to Playback Mode
Press the a button to start playback.  
Press the shutter button halfway to return 
to shooting mode.
 
Q You may be prompted to confirm 
that the battery-chamber cover is 
locked, but this does not indicate a 
malfunction.
Playback ModePlayback Mode
To turn the camera on and begin 
playback, press the a button for 
about a second.
Press the a button again or press 
the  ON/OFF button to turn the camera 
off.
  RRSwitching to Shooting ModeSwitching to Shooting Mode
To exit to shooting mode, press the 
shutter button halfway.  Press the  a 
button to return to playback. 
						

							18 First  Steps
Turning the Camera on and Off
 
Q Fingerprints and other marks on the protective glass covering the lens can affect 
pictures.  Keep the glass clean.
 
Q The 
ON/OFF button does not completely end the supply of power to the camera.
  RRAuto Power OffAuto Power Off
The camera will turn off automatically if no operations are performed for the length of 
time selected for M  AUTO POWER OFF (P 94).  To turn the camera on, use the  ON/OFF 
button or press the a button for about a second. 
						

							19 First  Steps
 Basic Setup Basic  Setup
A language-selection dialog is displayed the first time the camera is turned 
on.  Set up the camera as described below (you can reset the clock or change 
languages at any time using the F DATE/TIME or L a options in 
the setup menu; for information on displaying the setup menu, see page 89).
 1  Highlight a language and press MENU/OK.
 
R  Press  DISP/BACK to skip the current step.  Any steps you skip 
will be displayed the next time the camera is turned on.
START MENU
ENGLISH
NO
SET
DEUTSCH FRANCAIS
ESPAÑOL
PORTUGUÊS
 2 The date and time will be displayed.  Press the selector 
left or right to highlight the year, month, day, hour, or 
minute and press up or down to change.  To change the 
order in which the year, month, and day are displayed, 
highlight the date format and press the selector up or 
down.  Press  MENU/OK when settings are complete.
  RRThe Camera ClockThe Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the 
language-selection dialog will be displayed when the camera is turned on.
NO
SET
DATE / TIME NOT SET
 1.   1 12 : 00AMYY.  MM.  DD
2015
2014
2012
2011
2013 
						

							20
 Basic Photography and Playback Basic Photography and Playback
 Taking Pictures in  Taking Pictures in QQ (Scene Recognition) Mode (Scene Recognition) Mode
This section describes how to take pictures in QQ (scene recognitionscene recognition) mode.   
The camera automatically analyzes the composition and adjusts settings 
appropriately.
 1  Turn the camera on. Press the ON/OFF button to turn the camera on.  
Q shooting indicators will be displayed.
  The  The oo Icon Icon
This icon indicates that the camera continuously searches for faces to select the 
appropriate scene, increasing the drain on the battery.
  The Scene Icon  The Scene Icon
The camera selects the scene according to shooting conditions and the type of 
subject (the scenes in brackets are selected if the camera detects that the subject 
is moving):  d PORTRAIT ( a), c LANDSCAPE ( cc), d NIGHT ( cd),  e MACRO ( ce), 
dd  NIGHT PORTRAIT (ad), g  BACKLIT PORTRAIT (b), a AUTO (c).