Fujitsu B17 5 Eco Operating Manual

Getting started
12345
0   -
ECO / BASIC
1 = Green standby mode switch
2 = Power connector
3 = AUDIO-IN socket4 = DVI-D socket (DVI)
5 = D-SUB socket (VGA)
►Connect one of the connectors of the data cable to the D-SUB socket or DVI-D socket of
the monitor and secure the plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only one signal source is connected.
►Insert one plug of the audio line in the AUDIO IN socket on the monitor
and make sure it is properly...

Operation
Operation
Switching the device on and off
2
1
1 = Power supply indicator 2 = ON/OFF switch
Press the buttons from the bottom up.
The colour of the LED indicator changes as follows:
LED indicator Status
blue
Monitor and computer are switched on (normal mode).
green
Monitor and computer are switched on (ECO mode).
orange
The monitor is not receiving a video signal or is in energy-saving mode.
does not light up
The monitor is switched off (or is in green standby mode - power
consumption in standby...

Operation
In switch position 0 (ECO), green standby mode is activated, in which the monitor
consumes≤0.1 W. If the monitor cannot be switched on and remains dark, the switch
must be set to - (BASIC). The monitor then consumes < 1 W in standby mode.
►Switch the device on using the ON/OFF switch.
Only switch on the computer after you have switched on the monitor.
Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function....

Operation
Changing the monitor settings
When putting the monitor into operation for thefirst time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settingswith the buttons
of the control panel
The buttons of the control panel have two functions. With the OSD menu not
activated, you can make the following settings directly:
SELECT/ MENUINPUTEXIT / AUTO
123
ECO
1 = Buttons for the OSD menu (On-Screen
Display)
2 = Power supply indicator3 = ON/OFF switch...

Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
►Press the Forwards / ECO button to switch the ECO operating mode on or off.
The messageECO on / offis displayed.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
temperature6500K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the OSD menu
The...

Operation
The OSD menu is available in various languages. The English menu names are
used in the following description (default setting). You can select another language
using the OSDLanguagefunction in theOSD Setupmenu.
►Press theSELECT/MENUbutton to
activate the OSD menu.
The main menu appears, with icons
for the setting functions.
Thefirst icon, (Brightness/Contrast), is
highlighted and the associated functions are
visible in the right-hand menufield.
►Press the Forwards / ECO button or
the Back...

Operation
If you wish to change other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described below.
OSD menu functions
The OSD menu for analog monitor operation is described below. During
digital operation some functions are not available, as they are not required
due to the digital transmission technology used.
Adjusting the brightness and contrast
Call up theBrightness/Contrastsetting window
Brightness
Set the brightness of the...

Operation
Adjusting the picture size and position
Open theImage adjustwindow
H-position
Adjusting the horizontal position
With this function you can move the picture to the left or to the right.
V-position
Adjusting the vertical position
With this function you can move the picture up or down.
Clock
Adjusting the synchronisation
With this function you can adjust the picture width in order to eliminate
vertical picture faults.
Phase
Eliminating picture faults
With this function youfine-tune your monitor to...

Operation
Adjusting the display of the OSD menu
Calling theOSD Setupadjustment window
Language
Selecting the language for the OSD menu
With this function you choose between English (default setting), French,
German, Italian and Spanish as the language for the OSD menu.
OSDH position
Setting the horizontal position of the OSD menu
With this function you can move the OSD menu to the left or to the right.
OSDV position
Setting the vertical position of the OSD menu
With this function you can move the OSD...

Operation
Displaying information
Call theInformationsetting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal and polarity of the synchronisation signal are
displayed.
22 A26361-K1317-Z220-1-7619, edition 2