Home > Fujitsu > Scanner > Fujitsu Fi6130 Operators Manual

Fujitsu Fi6130 Operators Manual

Download as PDF Print this page Share this page

Have a look at the manual Fujitsu Fi6130 Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

$Page 201 HINT When the Timeout for Manual Feeding is enabled, the scanner waits for th\ e document to be loaded within the specified timeout period, even if scanning starts with\ no document loaded in the ADF paper chute. All Rights Reserved. Copyright 2007 © PFU LIMITED$

201

$Page 202 fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP 8.11 Power ON/OFF Control Setting You can select how to power the scanner on/off; by pressing the Power bu\ tton, or by connecting/disconnecting the AC cable. Configure the settings for power on/off control as follows. 1. Start up the Software Operation Panel. See Section 8.1 Scanner Settings. 2. Select [Device Setting 2] from the left side list in the window, and sel\ ect [Power SW Control]...$

202

203

204

$Page 205 Option Name: Black document pad [fi-6230 only] Parts No.: PA03540-D801 (Note (*9)) - Name: IMPRINTER [fi-6130 only] Parts No.: PA03540-D201 *1 The minimum size for scanning is A8 when using the ADF. When using the F\ latbed (fi-6230 only) to scan the minimum scanning range is virtually unlimited. *2 If you specify a long page which is 864 mm or longer, you must specify\ a resolution of 200 dpi or less. *3 The documents thicknesses noted are for when using the ADF. When using \ the...$

205

206

207

$Page 208 fi-6130 / fi-6230 Image Scanner Operators Guide TROUBLESHOOTING CONTENTS MAP TOP APPENDIX 1 Before Using the [Scan] or [Send to] Button By setting the link of the application software to the [Scan] or [Send t\ o] button, you can launch the linked application by simply pushing the button. (To use ScandAll PRO, read Section 3.15 Scanning by Pressing the Scan Button on the Scanner.) Settings to Configure on the Computer 1. Confirm if the scanner is connected correctly to the...$

208

$Page 209 The events available for this function are: l Scan Button (Press the [Scan] button) l Send to 1 to 9 (With a number from 1 to 9 displayed on the Function Num\ ber Display, press the [Send to] button) 8. Select the application with its process, excuted by the event. For Windo\ ws XP, click [Start this program] under [Actions] and select the application from the menu.$

209

210

$Page 211 l When using the [Send to] button Press the [Function] button to switch the number displayed on the Functi\ on Number Display. Use the same number assigned to the event configured on the computer (b\ y selecting a number from 1 to 9 then pressing the [Send to] button). Pressing the [Send to] button starts up the application configured. HINT l To perform the event configured with Send to 2, for example, display [\ 2] on the Function Number Display. l Each time the [Function] button...$

211

View all the pages

Add page 211 to Favourites

image text

Enable zoom

							
l     When using the [Send to] button
Press the [Function] button to switch the number displayed on the Functi\
on Number Display. 
Use the same number assigned to the event configured on the computer (b\
y selecting a number from 1 to 9 then 
pressing the [Send to] button). 
Pressing the [Send to] button starts up the application configured.
 
 HINT
 
l     To perform the event configured with Send to 2, for example, display [\
2] on the 
Function Number Display.
l     Each time the [Function] button is pressed, the number displayed changes\
 as follows: 
1, 2, 3, …9, C, 1, 2, 3, ….
  
All Rights Reserved. Copyright 2007 © PFU LIMITED

All Fujitsu manuals Comments (0)