Fujitsu Fujifilm X S1 Instruction Manual
Have a look at the manual Fujitsu Fujifilm X S1 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
7 Before You Begin Introduction • Playback 100-0001100-0001 12/31/205012/31/2050 1 / 1000 F4 . 510 :00 AM10 : 00 AM2-13 3:23:2FF 200 INFORMATION ON INFORMATION OFF : : : :OFF ISO 4001/250F4.5 2 3-112 / 31 / 2050 10 : 00 AM 100-00014:3N100-0001100-0001 3 12/31/205012/31/205010 : 00 AM10 : 00 AM DETAIL INFORMATION I FAVO R I T ES c Highlights Overexposed areas blink on and off. Histograms Histograms show the distribution of tones in the im- age. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis. Pixel brightness Shadows Highlights pixels No. of Optimal exposure : Pixels are distributed in an even curve throughout the tone range. Overexposed : Pixels are clustered at the right side of the graph. Underexposed : Pixels are clustered at the left side of the graph.
First Steps 8 Attaching Accessories First Steps The Strap The Strap Attach the strap to the two strap eyelets as shown below. c To avoid dropping the camera, be sure the strap is cor- rectly secured. The Lens CapThe Lens Cap Attach the lens cap as shown. To avoid losing the lens cap, pass the supplied string through the eyelet (q) and secure the lens cap to the strap ( w). The Lens HoodThe Lens Hood Rotate the lens hood in the direction shown until it clicks into place.
First Steps 9 Charging the Battery The battery is not charged at shipment. Charge the battery before use. 1 Place the battery in the supplied battery charger. Insert the battery in the orientation indicat- ed by the DFC labels. The camera uses an NP-95 rechargeable battery. Battery charger DFC label Battery DFC label Charge lamp Arrow c Attach the supplied adapter before charging the battery (the adapter is attached at shipment). Adapter 2 Plug the charger in. Plug the charger into an indoor power out- let. The charging indicator will light. The Charging Indicator The charging indicator shows battery charge status as follows: Charging Charging indicatorindicatorBattery statusBattery statusActionAction Off Battery not inserted. Insert the battery. Battery fully charged. Remove the battery. On Battery charging. — Blinks Battery fault. Unplug the charger and remove the battery. 3 Charge the battery. Remove the battery when charging is complete. See the specifications ( P 124) f o r charging times (note that charging times increase at low temperatures). c Unplug the charger when it is not in use.
10 Inserting the Battery Insert the batteries in the camera as described below. 1 Open the battery-chamber cover.Slide the battery-cham- ber latch in the direction shown and open the bat- ter y-chamber cover. a Be sure the camera is off before opening the bat- ter y-chamber cover. c • Do not open the battery-chamber cover when the camera is on. Failure to observe this pre- caution could result in damage to image files or memory cards. • Do not use excessive force when handling the battery-chamber cover. 2 Insert the battery.Insert the battery as shown in the illustration inside the battery chamber, using the bat- tery to keep the latch pressed to one side. Arrow Battery latch c Insert the battery in the correct orientation. Do NOT use force or attempt to insert the battery up- side down or backwards. The battery will slide in easily in the correct orientation.
First Steps 11 Inserting the Battery 3 Close the battery-chamber cover.Press the cover down un- til it clicks into place. Removing the Battery Before removing the battery, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the cam- era as shown. Battery latch c Batteries • Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging. • Do not affix stickers or other objects to the battery. Failure to observe this precaution could make it im- possible to remove the battery from the camera. • Do not short the battery terminals. The battery could overheat. • Read the cautions in “Power Supply and Battery” (P vi). • Use only battery chargers designated for use with the battery. Failure to observe this precaution could re- sult in product malfunction. • Do not remove the labels from the battery or attempt to split or peel the outer casing. • The battery gradually loses its charge when not in use. Charge the battery one or two days before use.
12 Inserting a Memory Card Although the camera can store pictures in inter- nal memory, optional SD, SDHC and SDXC mem- ory cards (sold separately) can be used to store additional pictures. 1 Open the memory card slot cover. a Be sure the camera is off be- fore opening the memory card slot cover. 2 Insert the memory card. Holding the memory card in the orientation shown below, slide it in until it clicks into place at the back of the slot. Click c • Be sure card is in the correct orientation; do not insert at an angle or use force. If the memory card is not correctly inserted or no memory card is inserted, a will appear in the LCD moni- tor and internal memory will be used for record- ing and playback. • SD/SDHC/SDXC memor y cards can be locked, mak- ing it impossible to format the card or to record or delete images. Before in- serting an SD/SDHC/SDXC memory card, slide the write-protect switch to the unlocked position. Write-protect Write-protect switchswitch
First Steps 13 Inserting a Memory Card 3 Close the memory card slot cover. Removing Memory Cards After confirming that the cam- era is off, press the card in and then release it slowly. The card can now be removed by hand. c • The memory card may spring out if you remove your finger immediately after pushing the card in. • Memory cards may be warm to the touch after be- ing removed from the camera. This is normal and does not indicate a malfunction.
14 Inserting a Memory Card ■ ■ Compatible Memory Cards Compatible Memory Cards FUJIFILM and SanDisk SD, SDHC, and SDXC mem- ory cards have been approved for use in the cam- era. A complete list of approved memory cards is available at http://www.fujifilm.com/support/ digital_cameras/compatibility/ . Operation is not guaranteed with other cards. The camera can not be used with xD-Picture Cards or MultiMedia Card (MMC) devices. c Memory Cards • Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card. • Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all memory cards af- ter using them in a computer or other device. For more information on formatting memory cards, see “K FORMAT ” (P 10 0). • Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately. • miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take the camera to an authorized service repre- sentative. Do not forcibly remove the card. • Do not affix labels to memory cards. Peeling labels can cause camera malfunction. • Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a G card or better when shooting HD or high-speed movies. • The data in internal memory may be erased or cor- rupted when the camera is repaired. Please note that the repairer will be able to view pictures in internal memory. • Formatting a memory card or internal memory in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a comput- er or other device to edit, delete, or rename image files. Always use the camera to delete pictures from memory cards and internal memory; before editing or renaming files, copy them to a computer and edit or rename the copies, not the originals.
First Steps 15 Turning the Camera on and Off Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn the camera off. b Switching to Playback Mode Press the a button to start playback. Press a button again or press the shutter button halfway to return to shooting mode. b Auto Power Off The camera will turn off automatically if no operations are performed for the length of time selected in the M AUTO POWER OFF menu ( P 102). To reactivate the camera after it has turned off automatically, turn the ON/OFF switch to OFF and then back to ON . Battery Level Battery level is shown as follows: IndicatorIndicatorDescriptionDescription D (white) Battery partially discharged. C (white) Battery more than half discharged. B (red) Low battery. Charge as soon as pos- sible. A (blinks red) Battery exhausted. Turn camera off and charge battery.
16 Basic Setup A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as described below (for information on resetting the clock or changing languages, see page 99). START MENU SET NO ENGLISH PORTUGUÊS ESPAÑOL FRANCAIS DEUTSCH1 Highlight a language and press MENU/OK . a Press DISP/BACK to skip the current step. Any steps you skip will be displayed the next time the camera is turned on. SET NO DATE / TIME NOT SET 2013 2012 2010 2009 YY. MM. DD 1. 1 12 : 00 AM 2011 2 The date and time will be displayed. Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the selector up or down. Press MENU/OK when settings are complete. b The Camera Clock If the battery is removed for an extended period, the came ra clock will be reset and the language-selection dialog will be displayed when the camera is turned on.