Fujitsu Myrica P42 2 User Manual

  
A26361-K1040-Z120-1-M119, edition 3  English 
Contents 
Introduction ........................................................................\
................................................................... 1 Notational conventions ........................................................................\
................................. ........ 2 Important notes........................................................................\
................................................................

Contents 
English  A26361-K1040-Z120-1-M119, edition 3 
Technical data ........................................................................\
......................................... .................... 33 VESA-DDC-compatible VGA interface ........................................................................\
............... 35 Preset operating modes (PC) ........................................................................\
............................ .35 Power consumption...

  
A26361-K1040-Z120-1-M119, edition 3  English - 1 
Introduction 
Your new plasma TV MYRICA P42-1A / P42-2 / P50-2possesses a whole range of useful features 
and functions, e.g.: 
●   TFT monitor (Thin Film Transistor; active matrix) 
●   analogue tuner for VHF, UHF and cable programmes 
●   connections for SCART (v ideo and RGB), video and S-Video 
●   minimal space requirements thanks to slim casing 
●   optimum ergonomic characteristics (totally di stortion-free and colour purity right into the...

MYRICA P42-1A / P42-2 / P50-2 
2 - English A26361-K1040-Z120-1-M119, edition 3 
Notational conventions 
The meanings of the symbols and fonts used in this manual are as follows: 
 
! Pay particular attention to text marked with th
is symbol. Failure to observe this warning 
endangers your life, destroys the device, or may lead to loss of data. 
 
i  Supplementary information, remarks, and tips follow this symbol. 
 ►
  Text which follows this symbol describes activi ties that must be performed in the...

  MYRICA P42-1A / P42-2 / P50-2 
A26361-K1040-Z120-1-M119, edition 3  English - 3 
●  The device may not be placed on the floor. 
●   he device automatically sets itself to the correct voltage within the range from 100 V to 240 V. 
Ensure that the local mains vo ltage lies within these limits. 
●   Ensure that the power socket on the device or  the earthed mains outlet is freely accessible. 
●   The ON/OFF switch does not disconnect the devic e from the mains voltage. To completely 
disconnect the mains...

MYRICA P42-1A / P42-2 / P50-2 
4 - English A26361-K1040-Z120-1-M119, edition 3 
Cleaning 
●  Remove the power plug before cleaning the device. 
●   Do not clean any interior parts yourself,  leave this job to a service technician. 
●   Do not use any cleaning agents that cont ain abrasives or may corrode plastic. 
●   Ensure that no liquid will run into the system. 
●   Ensure that the ventilation areas of the device are free. 
●   The display surface of the device is sensitiv e to pressure and...

  MYRICA P42-1A / P42-2 / P50-2 
A26361-K1040-Z120-1-M119, edition 3  English - 5 
Disposal and recycling 
This device has been manufactured to the highest possible degree from materials which can be 
recycled or disposed of in a manner that is not  environmentally damaging. The device may be taken 
back after use to be recycled, provided that it is re turned in a condition that is the result of normal 
use. Any components not reclaimed will be dispos ed of in an environmentally acceptable manner. 
If...

MYRICA P42-1A / P42-2 / P50-2 
6 - English A26361-K1040-Z120-1-M119, edition 3 
Preparing remove control 
Inserting batteries 
 
 ►  Open the back cover of the remote control by 
sliding it in the direction of the arrow. 
►   Place the batteries supplied in the battery 
compartment. Ensure correct polarity. 
►   Close the battery compartment by sliding the 
cover back on until you hear and feel it click 
into place. 
 
i Remove the batteries when not using t
he remote control for longer periods. 
Handle...

  MYRICA P42-1A / P42-2 / P50-2 
A26361-K1040-Z120-1-M119, edition 3  English - 7 
Installing plasma TV 
Before you install your plasma TV, you must mount the foot on the device. 
 
i The foot is shown as an example in the follo
wing illustrations. The delivered foot may differ 
from the illustration. 
 ►   Lay the plasma TV on a smooth, clean work  surface with the front facing downward. 
 
! Make sure that no objects are lying on the work
 surface, as otherwise the frame or display 
surface could be...

MYRICA P42-1A / P42-2 / P50-2 
8 - English A26361-K1040-Z120-1-M119, edition 3 
 
 ►  Screw on the shafts of the foot through 
the holes on the device. 
Use the screws provided for this 
purpose. 
 
 You can now place the plasma TV in the 
upright position. 
The device may not be placed on the floor.