Home > Fujitsu > Television > Fujitsu Myrica Pq50 1 Operating Manual

Fujitsu Myrica Pq50 1 Operating Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Fujitsu Myrica Pq50 1 Operating Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Operator control
    25ENGLISH
    Connection of external devices
    Connection to SCART1 / SCART2
    External devices such as the following can be connec-
    ted to SCART1 and SCART2: DVD player, DVD recor-
    der, video recorder, set top boxes and camcorders.
    In addition SCART1 has the facility to connect RGB
    sources.
    In addition SCART2 has the facility to connect YC
    sources.
    If you have selected the input SCART1 or SCART2
    with the [VIDEO] button, you can effect the settings
    described below.
    SPress the [MENU] button to open the main menu.
    SWith the button [Y]or[B] select the  menu
    and press the button [
    ].
    SSelect  [Y]/[B] and press the button [].
    SSelect the desired menu option (function) with the
    button [
    Y]or[B].
    SSelect the setting [A]/[].
    STo close the menu press the red button.
    TV SCART
    This function must be On, if automatic switching-over
    to the corresponding SCART input is to take place
    when the set is switched on to SCART1 or SCART2.
    SCART1 RGB IN
    SSCART: if a switch voltage is pending at pin 16 from
    an external device, the LCD/plasma TV switches
    over automatically to the pending RGB signal.
    Otherwise a CVBS signal is reproduced.
    SAlways: reproduction of an RGB signal only
    SUnused: reproduction of a CVBS signal only
    SCART2 YC IN
    SAlways: reproduction of a YC signal
    SUnused: reproduction of a CVBS signal
    FILM Mode
    This function detects whether the broadcast picture
    material is an original cinema film and optimizes the
    picture quality. This function is deactivated as stan-
    dard. To activate this function, set the menu option
     to On.
    This function is especially recommended if using a
    DVD player.
    Format detection
    Select the signal (level) for format detection.
    Two options are available for selection:
    SSwitch voltage
    Evaluation of the signal to pin 8 of the SCART sok-
    kets.
    SSoftware
    Detection of letterbox films on the basis of the black
    bars at the top and bottom.
    16 : 9 format (effective only for the format Auto Zoom!)
    The menu option  is active only if
    the switch voltage is set under the menu option
    .
    SLetterbox: Picture is stretched horizontally and ver-
    tically to full screen.
    SAnamorphic: Picture is stretched horizontally only
    to full screen.
    ENGLISH
     
    						
    							Operator control
    26ENGLISH
    Connection to the component inputs YUV
    You can connect external devices, such as a DVD
    player or DVD recorder with a YUV output, to YUV.
    For the audio signal use the inputs LINE IN YUV (L/R).
    SPress the [MENU] button to open the main menu.
    SWith the button [Y]or[B] select the  menu
    and press the button [
    ].
    SSelect  [Y]/[B] and press the button [].
    SSwitch the menu option  on or off [A]
    /[
    ].
    STo close the menu press the red button.
    FILM Mode
    See Connection to SCART1 / SCART2.
    Connection to the S-video inputYou can connect external devices, such as a DVD
    player, video recorder and camcorder with an S-video
    output, to S-VIDEO.
    For the audio signal use the inputs LINE IN S-VIDEO
    (L/R).
    SPress the [MENU] button to open the main menu.
    SWith the button [Y]or[B] select the  menu
    and press the button [
    ].
    SSelect  [Y]/[B] and then press the button
    [
    ].
    SSwitch the menu option  on or off [A]
    /[
    ].
    STo close the menu press the red button.
    FILM mode
    See Connection to SCART1 / SCART2.
     
    						
    							Operator control
    27ENGLISH
    Connection to the HDMI input
    The LCD/plasma TV is equipped with an HDMI input
    for digital video and audio signals.
    Connect an HDMI-compatible device, e.g. a DVD
    player or a set top box with an HDMI output socket,
    to the HDMI input.
    SPress the button [F4] to open the selection menu
    .
    SSelect input [Y]/[B] and then press the red button
    (M).
    You can also select the HDMI input by means of the
    [VIDEO] button.
    Signal:
    640 x 480 @ 60 Hz
    480i, 576i, 480p, 576p, 720p, 1080i
    HDMI (RGB, YUV) sound 2 channels up to 48 kHz
    DVI (RGB), sound via digital COAX IN
    Connection to the PC DVI-I input
    For the connection of a PC use the input PC DVI-I.
    If your PC has a digital DVI output, use a DVI cable for
    connection.
    If your PC has an RGB output (DSUB 15), use a DVI
    adapter cable on a DSUB for the connection.
    SPress the button [F4] to open the selection menu
    .
    SSelect input [Y]/[B] and then press the red button
    (M).
    You can also select the PC inputs by means of the
    [PC] button.
    Settings for PC (RGB)
    SPress the [MENU] button to open the main menu.
    SWith the button [Y]or[B] select the  menu
    and press the button [
    ].
    SSelect  [Y]/[B] and press the button [].
    Auto Setup
    SPress the button [] to start Auto setup.
    This function will now attempt to find the optimal pic-
    ture settings for the pending signal. During setting
    the picture will move slightly back and forth.
    H Total
    SYou can correct the scanning frequency for the PC
    picture here. This function is intended only for com-
    petent users.
    HDMI
    Signal
    ENGLISH
    PC (DVI)
    Signal
    PC (RGB)
    Signal
     
    						
    							Operator control
    28ENGLISH
    VPos.
    SSets the vertical picture position [A]/[].
    VSize
    SSets the vertical picture size [A]/[].
    HPos.
    SSets the horizontal picture position [A]/[].
    HSize
    SSets the horizontal picture size [A]/[].
    Phase
    SEliminate flickering and distortions.
    STo close the menu press the red button.
    Settings for PC (DVI)
    SPress the [MENU] button to open the main menu.
    SWith the button [Y]or[B] select the 
    menu and press the button [
    ].
    SSelect  [Y]/[B] and press the button
    [
    ].
    Overscan
    SSwitch  on and off [A]/[]
    As soon as the option Overscan is switched on, the
    edge of the picture is cut by approx. 10 %. Any faults
    on the edge of the picture are eliminated or made
    non-visible by this cutting facility.
    STo close the menu press the red button.
    Select inputs
    For the selection of an input use the selection menu
    .
    SPress the button [SOURCE] or [F4] to open the se-
    lection menu .
    SSelect input [Y]/[B] and then press the red button.
     
    						
    							Operator control
    29ENGLISH
    Special functions
    Screen saver, plasma TV only!
    SPress the [MENU] button to open the main menu.
    SWith the button [Y]or[B] select the 
    menu and press the button [
    ].
    SSelect  [Y]/[B] and press the but-
    ton [
    ].
    Select one of the following options [
    A]/[]:
    SWhite
    Use this option for cancelling more recent and less
    intensive “burns” on the display.
    SInverted
    Use this function for regenerating the display in the
    event of intensive “burns”.
    STo close the menu press the red button.ENGLISH
     
    						
    							Troubleshooting
    30ENGLISH
    Troubleshooting
    The following table shows conventional problems and the corresponding solutions. Inform yourself first of all using this table
    before you contact our hotline or service department.
    If the information provided for troubleshooting does not bring about success, switch OFF the unit via the
    mains switch and pull the mains plug out of the plug outlet.
    Do not attempt to repair the unit yourself and under no circumstances should you remove the rear cover
    from the set.
    DEFECTPOSSIBLE CAUSEPOSSIBLE REMEDY
    No picture and no sound,
    although the mains plug is
    inserted and the unit is
    switched on.DMainsswitchinposition“0”(OFF).
    DMains plug of unit is not inserted into the
    plug receptacle.
    DDefective mains cable .DShift mains switch to position “I”.
    DInsert the mains cable plug into the plug
    receptacle.
    DCall the service hotline.
    Screen dark.DContrast setting too low.
    DNo input signal, wrong input selected.DSet the brightness and/or contrast correctly
    (see menu option ).
    DCheck the connection cable; assign correct
    input to source.
    Weak or excessive
    colours.DColour not correctly set.
    DConnection cable not correctly
    connected.DSet the colour under the menu option
    .
    DConnect the cable correctly.
    The picture is cut off or the
    picture is not centred.DPicture position not correctly set.DCorrect the picture position.
    Use the auto setup function.
    The picture is too large or
    too small.DPicture format set wrongly.DRepeatedly press the button [FORMAT],
    until the picture is displayed as a full screen.
    The remote control is not
    working.DThe batteries are flat.
    DThere is an obstruction between the
    remote control and the sensor.
    DThe remote control is located
    outside of its operating range.DInsert the new batteries.
    DRemove the obstruction between the remote
    control and the sensor.
    DOperate the remote control within the speci-
    fied range.
    The displayed picture is
    too dark.DThe picture quality is not set correctly.DCorrect the picture brightness and contrast
    under the menu option .
    The picture is displayed,
    but there is no sound.DThe sound is switched to mute.
    DSet volume to minimum.DPress the button on the remote control.
    DIncrease the volume.
    Individual letters are not
    displayed (PC mode).DSet the phase position under the menu option
    .
    DCheck the setting for the picture width.
    DPerform .
    Horizontal stripes with TV
    or video signals.DSignal source is set up before the
    display.
    DScreening of the video cable is insuffi-
    cient.DAlways place the signal sources on the side
    of or behind the display.
    DUse only a high-grade signal cable with a
    high screening attenuation.
    To reset all settings to their original status, use the menu option
    !
     
    						
    							Technical specifications - MYRICA VQ40-1
    31ENGLISH
    Technical specifications - MYRICA VQ40-1
    DISPLAY
    Size / diagonal: 101 cm (40”), 16:9 format
    Displayable picture size: 885 mm (horizontal) x 497 mm (vertical)
    Resolution: 1366 x 768 pixels
    Colour display: 16.7 million colours
    Viewing angle: 178° typical
    VIDEO STANDARDS
    Video: PAL / SECAM / NTSC
    TV tuner: PAL (BG, DK, I) / SECAM (BG, DK, L), 47 - 861 MHz (VHF, UHF, Hyperband)
    PALplus, Cinescope: Automatic format detection (full screen)
    Formats: 4:3, 16:9 (top), 14:9 (top), panorama, full screen
    PC FREQUENCY RANGE
    Horizontal frequency: 30 - 80 kHz
    Vertical frequency: 50 - 90 Hz
    Clock frequency: max. 110 MHz
    Resolutions (VGA analogue):
    Recommended resolution:DOS: 640 x 480 @ 60 Hz, 720 x 400 @ 70 Hz,
    VGA: 640 x 480, SVGA: 800 x 600; WVGA: 848 x 480 @ 60 Hz
    XGA: 1024 x 768 @ 60 Hz
    WXGA: 1360 x 768 @ 60 Hz
    SXGA: 1280 x 1024 @ 60 Hz
    1360 x 768 @ 60 Hz
    Formats: 1:1, full screen, format filling, zoom
    INPUTS / CONNECTIONS / SYNCHRONIZATION
    PC / Video input port: RGB analogue and automatic sync detection
    Video connections: TV tuner: IEC, 75 ohms input resistance
    SCART1: RGB, CVBS input, CVBS output
    SCART2: YC, CVBS input, CVBS output
    Y/C: MiniDIN (HOSIDEN)
    YUV (CVBS): 3 x Cinch (HDTV)
    CVBS: 1 x Cinch (Y)
    HDMI: digital video / audio (HDTV)
    PC analogue/digital connection DVI-I: analogue RGB
    digital DVI 1.0 - HDCP
    Audio sockets: Integrated loudspeakers: 4 x broadband
    Stereo input: 2 x Cinch L/R 1Vrms (YUV (CVBS), YC)
    1 x PC AUDIO IN
    1 x Cinch digital audio input (DIG IN COAX)
    2 x SCART 1 Vrms
    Stereo output: 2 x Cinch (LINE OUT L/R)
    Active subwoofer: 1 x Cinch (LINE OUT SUB)
    Digital audio output: 1 x Cinch (DIG OUT COAX)
    Output wattage of amplifiers: 2 x 7W RMS (2 ohms)
    Synchronization: Sync on green, composite sync with automatic detection,
    Separate H and V sync
    Operator control elements: Mains switch, IR remote control (OSD menu 12 languages), local operator control
    OPERATING CONDITIONS
    Temperature: +5 °C - +35 °C (in operation), -20 °C - +60 °C (storage)
    Air humidity: 20 % - 85 % (non-condensating) @ 35 °C
    Elevation: Max. 2,000 m (7,000 ft)
    DATA MAINS CONNECTION
    Voltage supply: 110 - 240 V ~
    Mains frequency: 50 / 60 Hz
    Power consumption: 270 W typical, < 3 W in standby mode
    DIMENSIONS AND WEIGHT
    Set with stand H x W x D:
    Set without stand H x W x D:(657.1 mm x 989.1 mm x 244.2 mm) ± 3 mm
    (616.5 mm x 989.1 mm x 113.6 mm) ± 3 mm
    Weight of set:
    Weight of stand:
    Total weight:21.5 kg ± 10 %
    2.8 kg ± 10 %
    24.3 kg ± 10 %
    ENGLISH
     
    						
    							Technical specifications - MYRICA PQ42-1
    32ENGLISH
    Technical specifications - MYRICA PQ42-1
    DISPLAY
    Size / diagonal: 106 cm (42”), 16:9 format
    Displayable picture size: 920 mm (horizontal) x 518 mm (vertical)
    Resolution: 1024 x 768 pixels
    Colour display: 16.7 million colours
    Viewing angle: > 160°
    VIDEO STANDARDS
    Video: PAL / SECAM / NTSC
    TV tuner: PAL (BG, DK, I) / SECAM (BG, DK, L), 47 - 861 MHz (VHF, UHF, Hyperband)
    PALplus, Cinescope: Automatic format detection (full screen)
    Formats: 4:3, 16:9 (top), 14:9 (top), panorama, full screen
    PC FREQUENCY RANGE
    Horizontal frequency: 30 - 80 kHz
    Vertical frequency: 50 - 90 Hz
    Clock frequency: max. 110 MHz
    Resolutions (VGA analogue):
    Recommended resolution:DOS: 640 x 480 @ 60 Hz, 720 x 400 @ 70 Hz,
    VGA: 640 x 480, SVGA: 800 x 600; WVGA: 848 x 480 @ 60 Hz
    XGA: 1024 x 768 @ 60 Hz
    WXGA: 1360 x 768 @ 60 Hz
    SXGA: 1280 x 1024 @ 60 Hz
    1024 x 768 @ 60 Hz
    Formats: 1:1, full screen, format filling, zoom
    INPUTS / CONNECTIONS / SYNCHRONIZATION
    PC / Video input port: RGB analogue and automatic sync detection
    Video connections: TV tuner: IEC, 75 ohms input resistance
    SCART1: RGB, CVBS input, CVBS output
    SCART2: YC, CVBS input, CVBS output
    Y/C: MiniDIN (HOSIDEN)
    YUV (CVBS): 3 x Cinch (HDTV)
    CVBS: 1 x Cinch (Y)
    HDMI: digitla video / audio (HDTV)
    PC analogue/digital connection: DVI-I: analogue RGB
    digital DVI 1.0 - HDCP
    Audio sockets: Integrated loudspeakers: 4 x broadband
    Stereo input: 2 x Cinch L/R 1Vrms (YUV (CVBS), YC)
    1 x PC AUDIO IN
    1 x Cinch digital audio input (DIG IN COAX)
    2 x SCART 1 Vrms
    Stereo output: 2 x Cinch (LINE OUT L/R)
    Active subwoofer: 1 x Cinch (LINE OUT SUB)
    Digital audio output: 1 x Cinch (DIG OUT COAX)
    Output wattage of amplifiers: 2 x 7W RMS (8 ohms)
    Synchronization: Sync on green, composite sync with automatic detection,
    Separate H and V sync
    Operator control elements: Mains switch, IR remote control (OSD menu 12 languages), local operator control
    OPERATING CONDITIONS
    Temperature: +5 °C - +35 °C (in operation), -20 °C - +60 °C (storage)
    Air humidity: 20 % - 85 % (non-condensating) @ 35 °C
    Elevation: max. 2,000 m (7,000 ft)
    DATA MAINS CONNECTION
    Voltage supply: 110 - 240 V ~
    Mains frequency: 50 / 60 Hz
    Power consumption: 330 W typical, < 3 W in standby mode
    DIMENSIONS AND WEIGHT
    Set with stand H x W x D:
    Set without stand H x W x D:(697.8 mm x 1045 mm x 244.2 mm) ± 3 mm
    (656.9 mm x 1045 mm x 99.9 mm) ± 3 mm
    Weight of set:
    Weight of stand:
    Total weight:37.15 kg ± 10 %
    2.85 kg ± 10 %
    40.00 kg ± 10 %
     
    						
    							Technical specifications - MYRICA PQ50-1
    33ENGLISH
    Technical specifications - MYRICA PQ50-1
    DISPLAY
    Size / diagonal: 127 cm (50”), 16:9 format
    Displayable picture size: 1106 mm (horizontal) x 622 mm (vertical)
    Resolution: 1366 x 768 pixels
    Colour display: 16.7 million colours
    Viewing angle: > 160°
    VIDEO STANDARDS
    Video: PAL / SECAM / NTSC
    TV tuner: PAL (BG, DK, I) / SECAM (BG, DK, L), 47 - 861 MHz (VHF, UHF, Hyperband)
    PALplus, Cinescope: Automatic format detection (full screen)
    Formats: 4:3, 16:9 (top), 14:9 (top), panorama, full screen
    PC FREQUENCY RANGE
    Horizontal frequency: 30 - 80 kHz
    Vertical frequency: 50 - 90 Hz
    Clock frequency: max. 110 MHz
    Resolutions (VGA analogue):
    Recommended resolution:DOS: 640 x 480 @ 60 Hz, 720 x 400 @ 70 Hz,
    VGA: 640 x 480, SVGA: 800 x 600; WVGA: 848 x 480 @ 60 Hz
    XGA: 1024 x 768 @ 60 Hz
    WXGA: 1360 x 768 @ 60 Hz
    SXGA: 1280 x 1024 @ 60 Hz
    1360 x 768 @ 60 Hz
    Formats: 1:1, full screen, format filling, zoom
    INPUTS / CONNECTIONS / SYNCHRONIZATION
    PC / Video input port: RGB analogue and automatic sync detection
    Video connections: TV tuner: IEC, 75 ohms input resistance
    SCART1: RGB, CVBS input, CVBS output
    SCART2: YC, CVBS input, CVBS output
    Y/C: MiniDIN (HOSIDEN)
    YUV (CVBS): 3 x Cinch (HDTV)
    CVBS: 1 x Cinch (Y)
    HDMI: digitla video / audio (HDTV)
    PC analogue/digital connection: DVI-I: analogue RGB
    digital DVI 1.0 - HDCP
    Audio sockets: Integrated loudspeakers: 4 x broadband
    Stereo input: 2 x Cinch L/R 1Vrms (YUV (CVBS), YC)
    1 x PC AUDIO IN
    1 x Cinch digital audio input (DIG IN COAX)
    2 x SCART 1 Vrms
    Stereo output: 2 x Cinch (LINE OUT L/R)
    Active subwoofer: 1 x Cinch (LINE OUT SUB)
    Digital audio output: 1 x Cinch (DIG OUT COAX)
    Output wattage of amplifiers: 2 x 7W RMS (8 ohms)
    Synchronization: Sync on green, composite sync with automatic detection,
    Separate H and V sync
    Operator control elements: Mains switch, IR remote control (OSD menu 12 languages), local operator control
    OPERATING CONDITIONS
    Temperature: +5 °C - +35 °C (in operation), -20 °C - +60 °C (storage)
    Air humidity: 20 % - 85 % (non-condensating) @ 35 °C
    Elevation: max. 2,000 m (7,000 ft)
    DATA MAINS CONNECTION
    Voltage supply: 110 - 240 V ~
    Mains frequency: 50 / 60 Hz
    Power consumption: 450 W typical, < 3 W in standby mode
    DIMENSIONS AND WEIGHT
    Set with stand H x W x D:
    Set without stand H x W x D:(792.3 mm x 1228 mm x 269.2 mm) ± 3 mm
    (758.9 mm x 1228 mm x 107.7 mm) ± 3 mm
    Weight of set:
    Weight of stand:
    Total weight:46.3 kg ± 10%
    3.0 kg ± 10 %
    49.3 kg ± 10 %
    ENGLISH
     
    						
    All Fujitsu manuals Comments (0)

    Related Manuals for Fujitsu Myrica Pq50 1 Operating Manual