Fujitsu P24w 6 Ips Operating Manual

Important notes
Important notes
Importantnotes
NotesIn this chapter you willfind information regarding safety which it is essential to
take note of when working with your device.
Safety instructions
This device complies wit h the relevant safety regulations for data processing equipment,
including electronic of fi
ce machines for use in an of fice environment. If you have
any questions about whe ther the device can be used in the intended environment,
please contact your sal es of
fice or our Service Desk.
•...

Important notes
• The device must only be operated in landscape mode (0°) and portrait mode (90°). The
control buttons are located in the middle of the bottom of the monitor in landscape mode
(0°) and at the left-hand side of the monitor in portrait mode (90°).
• Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it.
• We recommend that you place your device on a durable, non-slip surface. In view of the many different finishes and...

Important notes
CE marking
The shipped version of this device complies with the requirements of EEC
directives 2004/108/EC Electromagnetic compatibility and 2006/95/EC
Low voltage directive.
Power management
The Fujitsu LCD monitor is equipped with a power management system which, when in
0W power-saving mode, reduces the power consumption to 0W.
Disposal and recycling
This device has been manufactured as far as possible from materials which can be recycled or
disposed of in such a way that the...

Getting started
Getting started
Unpacking and checking the delivery
The display surface of the device is sensitive to pressure and scratches.
Always hold the device by the casing!
The complete device package includes:
• one monitor
• one data cable (DP)
• one data cable (DVI)
• one data cable (VGA)
•oneUSBcable
• one audio cable
• one power cable
• one CD with software and documentation
• one Warranty Booklet
• one Quick Start Guide brochure
• one Safety manual
► Unpack all the individual parts.
► Check...

Getting started
Settingupthedevice
To ensure sufficient ventilation, the air inlet and outlet openings of
the device must be kept clear.
Setting up an ergonomic video workstation
1
► Do not position the video workstation
opposite a window (1).
1►Position the monitor outside the reach
of a light source (1).
Fujitsu Technology Solutions 11
 

Getting started
1
►Position the keyboard where it is
easiest to reach (1).
1
50 cm
►Position the monitor so that the eye distance
to the screen (1) is around 50 cm.
►Position the monitor for optimum viewing
(1). The monitor should under no
circumstances fall outside the permissible
viewing space (2).
Depending on the situation, it may be advisable to use a swivel arm or wall
bracket (VESA FPMPMI), which are available from specialist dealers. For
this purpose the monitor base must be removed beforehand as...

Getting started
Adjusting height
The height adjustment isfixed in the transport position.
1
2
►
To free the fixing, remove the locking
pinonthe flange (1).
The height of the monitor can be adjusted
by approximately 120 mm.
► Grasp the monitor with both hands on
the right and left edge of the casing
and move it up or down (2).
Adjusting the i nclination
The inclination of the monitor can be adjusted by -
3° (forward) and  +35°
(back) from
its vertical position.
► Hold the monitor with both hands on the left...

Getting started
Removing monitor base
Before you can use a swivel arm or a wall bracket, you must remove the monitor base.
The display surface is susceptible to scratching!
1
1
1
1
►
Switch off the monitor and pull the power
plug out of the power socket.
► Lay the monitor on its face on a soft surface.
► Remove the cover and disconnect all cables.
► Remove the screws (1) on the rear
of the monitor.
You can now mount a swivel arm or a wall
bracket in accordance with VESA FPMPMI
using a hole spacing of...

Getting started
Connecting the device
Please observe the safety information inImportantnotes,Page7.
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.
Connecting cables to the monitor
The monitor ports are protected by a cover.
The supplied data cable s have two 15-pin D-SUB connectors or two 24-pin DVI connectors
or two 20-pin DP-conne ctors for connection to the...

Getting started
►Remove the cover.
► Select the appropriate data cable for your computer.
► Connect one of the connectors of the data cable to the D-SUB socket or the DVI-D socket or the
DP socket of the monitor and secure the plug connection by tightening the retaining screws.
If you are using a display port data cable, you must switch the 0 W switch to
the Basic setting. If you are only using a DVI or VGA data cable, you can switch
the 0 W switch to the ECO setting to activate the 0 W standby.
The...