Fujitsu P42hhs30 Users Manual

Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise.  Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
*Installation and removal require special expertise.  Consult your product dealer for details.
Contents
Before Use
•Safety Precautions ··································· E-2–E-3
•Features...

E-2
SAFETY PRECAUTIONS
IMPORTANT INFORMATION
IMPORTANT
WARNING:
This is a Class B product.  In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
WARNING:TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
FCC NOTICE
•A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These...

E-3
English
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, dose not operate normally, or has been dropped.
–Unplug this product from the wall outlet before cleaning.  Do not use liquid cleaners or aerosol cleaners.  Use a damp cloth for cleaning.
–Do not use...

E-4
FEATURES
Variety of input signals
•The unit features one video terminal, one S-video terminal, two component video terminals, and three SCART terminals.
•In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high
definition picture quality.
•Depending on the model, the display supports video input for different colour television systems as follows: NTSC, PAL, SECAM,
PAL60, N-PAL, M-PAL, 4.43NTSC.
Desired screen size
•This display...

E-5
English
ACCESSORIES
Information
Cables for connecting the display to external equipment are not supplied.  Contact your dealer for more information on these products.
CHECKING ACCESSORIES
HANDY TIPS
•Have the display inspected and cleaned by your dealer at regular intervals.
•Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods.  To ensure that the display has a
prolonged service life, be sure to use a screen orbiter, white screen.  This will ensure the...

E-6
INSTALLATION
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display.  Also, be also sure that your dealer
performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the display...

E-7
English
PART NAMES AND FUNCTIONS
‹

ƒ

„

DISPLAY SECTION – FRONT
1Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): Stand-by
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power saving
function) mode ON (See P. E-42.)
Flashing
(red or green): Malfunction (Flashes differently depending
on the type of malfunction.)
2Remote control signal receiver
Receives signals from the remote control.
3Input mode selector button 
[MODE]
4Input mode selector button 
[MODE]...

E-8
1 power switch
When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON 
” state, and the power
can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON 
” state,
the power indicator lamp goes out and the display is placed in the “OFF” state.
2Display input (picture) terminal
Connect this terminal to the display output terminal on the tuner using the special cable provided.
3Display input...

E-9
English
SELECTOR SECTION – FRONT
1Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): Stand-by
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power saving function) mode ON (See P. E-42.)
Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction. See P. E-50 for more information.)
2Remote control signal receiver
Receives signals from the remote control.
3POWER button
Turns the power “ON” and “OFF”.
*Even when the power is “OFF”,...

E-10
SELECTOR SECTION – REAR
PART NAMES AND FUNCTIONS (Continued)
AUDIO
INPUTVIDEO5 VIDEO6 RGB1 RGB2
DIGITAL1 DIGITAL2
VIDEO1
PICTUREINPUT
DIGITALAUDIO
OUTPUT
DISPLAY OUTPUT
VIDEO2
VIDEO4
mD-sub
PICTURE AUDIO VIDEO5VIDEO1
Y            P
B/CB         PR/CRCOMPONENT VIDEOY            PB/CB         PR/CRCOMPONENT VIDEORGB2
RGB1
DVI SCARTSCART SCART
1Audio input terminals
Input audio through the terminals corresponding to the used video input terminals.
*The digital input terminals can be matched as desired...