Fujitsu P42hts40 Users Manual

E-11
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
 (Enter button) Î E-32–E-44
Press this button to fix the entry in the ADJUSTMENT MENU.

 (DUAL/STEREO button) Î E-29
Press this button to select the audio mode for stereo/dual-channel audio broadcasting.

 (COLOR button) Î E-27
In the teletext broadcasting, press these buttons to switch through the pages stored to 
each of the four colors in the LIST mode. Other than the LIST mode, these buttons can 
also be used for...

E-12
USING THE REMOTE CONTROL
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or 
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
PUTTING BATTERIES IN THE REMOTE CONTROL
(1) To remove the cover, slide it outwards 
while pressing it down.(2)...

E-13
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Point the remote control at the display’s signal receiver when using it.
Make sure that there are no obstacles between the remote control and the display’s signal receiver.
EFFECTIVE RANGE FOR THE REMOTE CONTROL
Left
Display – front
Display – side
Upper
LowerRight
5 m (Front)Left
Right
5 m (Front)
Upper
Lower
Note
The remote control may not function properly if you use a high-frequency fluorescent lamp.  If you experience...

E-14
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Be sure to turn OFF the power to the display and external equipment before making any connections. 
No cables are supplied with the display for connection to external equipment.  The type of cable to be used varies depending on the PC 
model. Contact your dealer for more information. 
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in picture or color problems.  Make sure that all connectors...

E-15
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
1. Connect the following items to the AV Selector and the display 
(1) AV Selector and display 
Connect these two with the provided system connection cable. (For details, see page E-16.) 
(2) Antenna line
See page E-17 for further details.
(3) Speakers 
For how to connect speakers, see the instructions provided with the speakers. 
2. Connecting the power cord 
• Connect the power plug of the display and AV Selector power cords...

E-16
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
CONNECTING THE DISPLAY AND THE AV SELECTOR
Rear side of display
Left speaker cable Right speaker cable
Red
Black
Power inputDisplay input terminal
To AC outletAudio 
terminalPicture 
terminal
Rear side of AV Selector
To AC outlet
MHD01862_E.book  16 ページ  ２００５年６月１４日　火曜日　午前１１時５０分
 

E-17
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• Connects to the antenna input terminal on the AV Selector rear panel.
• Please enquire with your local teletext broadcasting company if you want to receive teletext broadcasts.
CONNECTING THE ANTENNA
Antenna (commercially available product)
To the antenna input
AV Selector rear panel
MHD01862_E.book  17 ページ  ２００５年６月１４日　火曜日　午前１１時５０分
 

E-18
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker Display Speaker (optional)
Remote 
control
VCR Î E-19
DVD recorder/player Î E-20PC Î E-22
VCR or other external components See P. ÎAV  S e l e c t o r
Audio amplifier Î E-23 Video camera Î E-21
Videogame machine Î E-21
Satellite tuner Î E-20 Antenna (commercially available product)
To AC outlet
To AC outlet
MHD01862_E.book  18 ページ  ２００５年６月１４日　火曜日　午前１１時５０分
 

E-19
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• Connect the video signal cable to SCART terminal.
VCR
To SCART output
To SCART input
Rear side of AV selector
Note
• Unplug the power cord from the AC outlet before you connect external components. 
• Also refer to the instructions for the component to be connected. 
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input. 
MHD01862_E.book  19 ページ  ２００５年６月１４日　火曜日　午前１１時５０分
 

E-20
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
• Connect the video signal cable to the component video input terminal, the HDMI input terminal or the SCART terminal. 
• If the component to be connected is equipped with HDMI output terminal or the component video output terminal, connection to either of these 
terminals is recommended.
• Connect the video signal cable to the component video input terminal, the HDMI input terminal or the SCART terminal. 
• If the component to be connected is...