Fujitsu P50xha58 Users Manual
Here you can view all the pages of manual Fujitsu P50xha58 Users Manual. The Fujitsu manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
English Deutsch Espa ñol Fran çais Italiano Portugu ês Póññêèé Before Use• INFORMATION............................................................ E-2 Usage • INSTALLATION ........................................................... E-3 • PART NAMES AND FUNCTIONS ............................... E-4 • USING THE REMOTE CONTROL .............................. E-7 • CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT ............................................................... E-9 • BASIC OPERATIONS...
Page 2
E-2 INFORMATION • ReceptacleMake sure that the power cord’s grounding wire is grounded. The plasma display comes with a 3-prong power plug; one pro ng is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to ha ve it replaced. Contact your dealer for more information. • Have the plasma display inspected and cl eaned by your dealer at regular intervals. • Do not display the same picture for a long time, because part of the screen may “burn-in” and create a residual...
Page 3
E-3 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 INSTALLATION • To prevent the plasma display’s internal components from overheating, make sure that the plasma display is installed in a well-ventilated location. • Be sure to use the optional stand, wall-m ounting unit or the other mounting unit when installing the plasma display. Also, be sure that your dealer performs the installation. • See the appropriate inst ruction manual for additional informati on on the mounting...
Page 4
E-4 PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT Power indicator lamp This lamp shows the state of the power supply. Lit (red): Stand-by state Lit (green): Power ON state Flashing (red or green): Malf unction (Flashes differently depending on the type of malfunction.) Remote control signal receiver Receives signals from the remote control. Input mode selector button Input mode selector button Switches between pict ure input modes. Vo l u m e + b u t t o n Volume - button...
Page 5
E-5 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 / I power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by us ing the remote control or the control panel of the display. If this button is pressed when th e power indicator lamp is lit, the indicator lamp will go out. *Power is still supplied to parts of the display even if the indicator lamp is off. HDMI input...
Page 6
E-6 PART NAMES AND FUNCTIONS (Continued) HDMI, the HDMI logo and High-Definition Multimedia interface are trademarks or registered trademarks of HDMI Licensing LCC. DESCRIPTION OF INPUT TERMINALS TRADEMARK INFOMATION mD-sub input terminal (RGB1 INPUT/mD-sub)Pin No. Input signal Pin No. Input signal 1Red 9— 2 Green 10 Ground 3Blue 11— 4— 12— 5 Ground 13 Horizontal synchronization 6 Ground 14 Vertical synchronization 7 Ground 15 — 8 Ground Frame Ground RS-232C terminal (RS-232C)Pin No. Signal 1 DCD...
Page 7
E-7 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 USING THE REMOTE CONTROL For details, see page Î. REMOTE CONTROL button Î E-10 Switches between Power On and Standby. - (MUTE button) Î E-10 Press to temporarily mute the audio. To return the audio to normal, press this button once again, or press the 1 does the 2 work also. 3 (DISPLAY button) Î E-11 Press to display the input m ode and screen size status. The status is displayed for about five seconds. 4 (PICTURE...
Page 8
E-8 USING THE REMOTE CONTROL (Continued) To prevent malfunction, do not apply any form of severe shock to the remote control. To prevent malfunction or deformation, do not allow the remote control to become wet and keep it away from hot surfaces or heating equipmen t. Do not clean the remote control using a cloth dampened in a volatile solvent, such as benzene or thinner. When using the remote control, be sure to point it directly at the plasma displays signal receiver. Make sure that there are n o...
Page 9
E-9 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT • Connect the video signal cable to the HDMI input terminal, component video input terminal, S-video input terminal, or the vide o input terminal. •If the equipment to be connected is equipped with HDMI output terminal and component video output te rminal, it is recommended to connect to one side or the other. (If the HDMI output is connected, an Audio signal cable does not need to...
Page 10
E-10 BASIC OPERATIONS TURNING THE POWER ON AND STAND-BY 1 Press/I to the left at the bottom of the display to the ONstate. The power lamp lights up. 2 Press on the remote control. The color of the power lamp changes from “Red” to “Green”. 3 Press – or ). Select the video mode to input. 4 Press when the power is ON. The color of the power lamp changes from “Green” to “Red” and the the power turns “OFF (Stand- by state)”. ADJUSTING THE VOLUME Adjusting the volume Press 1 to increase the volume....