Fujitsu P55xha30 Users Manual

							E-19
English
ADJUSTING PICTURES (PICTURE MENU)
BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]
“PICTURE” selected in the main menu
screen (Video Input Mode)
“Tint” selected in the PICTURE Menu
screen (Video Input Mode)
You can make changes to all picture adjustment options in the PICTURE Menu.
The changes you make will be stored for a selected input mode.  Therefore, you need to select a desired input mode before making any
changes.
“Tint” adjustment screen
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT
1
2
Press .
The main menu screen will appear.
Press  or  to select
“PICTURE”.
Each time you press  or , one of the available
menus appears in the following sequence:
The PICTURE Menu screen will appear.
Press  or  to select
“Tint”.
Press 
 .
The “Tint” adjustment screen will appear.
Press  or  to change tint
values.
 : More greenish colors
 : More purplish colors
Press  to store.
Press 
  when you finish.
*Repeat steps 3, 4, 5 and 6 when you wish to
make changes to other options.
*When 
 is pressed after you have selected
“Default”, the settings are returned to those that
were valid when you purchased the set.
3
4
5
6
* On-screen information disappears if you do not take any action for about 60 seconds.
*Functions may not be available with some models and some device options.
*The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.

&1MBTNBXJEF
	
03.10.3, 0:17 PM Page 19EPCF
1BHF.BLFS
+11$
 
						

							E-20
ADJUSTING PICTURES (PICTURE MENU) (Continued)
• Contrast, brightness, color darkness, tint, and picture sharpness are ad\
justed as shown in the following chart.Select the item with 
 , and then adjust with  . Finally, press  to implement the adjustments.
• Setting Picture Mode (Picture Mode)
Can set up the picture mode.
Each time you press 
 or , one of the available choices appears in the following sequence:
Natural Fine Effective Conventional Still
Natural: You can watch the natural color/high clear picture. Suitable for watching a normal motion picture. (Standard)
Fine: Suitable for watching a dark picture such as movie.
Effective: Makes a strong contrast picture.
Conventional: Makes close to a conventional TV picture.
Still: Suitable for watching a still picture.
Press 
 to store.
*Select Natural, Fine, Effective, Conventional or Still to suit your taste.
• Precision Setting (for more advanced adjustment)
Luminance, Black Level, Color Temperature, and User Color Temperature are adjusted as shown in
the following chart.
Select the item with 
 , and then adjust with  . Finally, press  to implement the
adjustments.
Adjustment Item Contents of Adjustments Operation
Luminance
Black Level
Color Temperature
User Color Temperature Adjusts the luminance level.
(when the Picture Mode is Fine)
Adjusts the picture when watching a dark image.
(when the Picture Mode is Fine)
Set to low to obtain a warm atmosphere, and set to high
to obtain a cold atmosphere.
Enables individual adjustment of Red, Green and Blue. Use 
  to adjust.
Use   to adjust.
Use   to adjust.
Use   to select, and use   to adjust.
Adjustment Item
Contrast Lower contrast Higher contrast
Brightness Darker screen Brighter screen
Color Lighter colors Darker colors
Tint More purplish colors More greenish colors
Sharpness Softer pictures Sharper pictures

&1MBTNBXJEF
	

03.10.16, 6:32 PM
Page 20 EPCF
1BHF.BLFS
+11$
 
						

							English
E-21
• Setting Noise Reduction (Noise Reduction)
Can select the noise reduction (This can make the flicker picture clear).
Each time you press 
 or  ,one of the available choices appears in the following sequence:
Off: Noise reduction does not function.
Min.: Weak setting
Std.: Standard setting
Max.: Strong setting
Press 
 to store.
*Some type of signal can not be selected.
• Storing the setting of PICTURE (Picture Memory)
Stores 8 patterns of adjustments set by PICTURE.
Read out and store to suit your taste.
In case of “Load”
When setting “Load”: Read out your desired Setting.
(1) Select “Picture Memory” and press 
.
The “Picture Memory” screen will appear.
(2) Press 
 or  to select Load.
(3) Select Data number to make Load.
(4) Press 
 to read out.
In case of “Save”
When setting “Save”: Set to suit your taste and store.
(1) Select “Picture Memory” and press 
.
The “Picture Memory” screen will appear.
(2) Press 
 or  to select Save.
(3) Select Data number to make Save.
(4) Press 
 to save.“Picture Memory” selection screen
“Load” selection screen
* On-screen information disappears if you do not take any action for about 60 seconds.
*Functions may not be available with some models and some device options.
*The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.

&1MBTNBXJEF
	
03.10.3, 0:17 PM Page 21EPCF
1BHF.BLFS
+11$
 
						

							E-22
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)
BASIC OPERATION [EX. : ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION]
“POSITION/SIZE” selected from the main
menu screen
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.
The changes you make will be stored for the selected input mode.  Therefore, you need to select a desired input mode before making any
changes.
“Position” adjustment screen
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT













1
2
3
4
5
6
Press .
The main menu screen will appear.
Press  or  to select
“POSITION/SIZE”.
Each time you press  or , one of the available
menus appears in the following sequence:
The POSITION/SIZE Menu screen will appear.
Press  or  to select
“Position”.
Press 
 .
The “Position” adjustment screen will appear.
Press , ,  or  to
change position values.
 : Moves screen up.
 : Moves screen down.
 : Moves screen to the right.
 : Moves screen to the left.
Press  to store.
Press 
  when you finish.
*Repeat steps 3 to 6 when you wish to make
changes to other options.
*When 
 is pressed after you have selected
“Default”, the settings are returned to those that
were valid when you purchased the set.

&1MBTNBXJEF
	
03.10.3, 0:17 PM Page 22EPCF
1BHF.BLFS
+11$
 
						

							English
E-23
* On-screen information disappears if you do not take any action for about 60 seconds.
*Functions may not be available with some models and some device options.
*The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range. “Position” adjustment screen
“Size” adjustment screen
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
 : Moves screen to the right.
 : Moves screen to the left.
Vertical position (Vertical)
 : Moves screen up.
 : Moves screen down.
Press  to store.
Adjusting Screen Size (Size)
Screen width (Width)
 : Increases width.
 : Reduces width.
Screen height (Height)
:Increases height.
 : Reduces height.
Press  to store.
*You cannot adjust screen size in RGB1 (DVI-D) mode.
→
→
→
→
→
→
→
→

&1MBTNBXJEF
	
03.10.3, 0:17 PM Page 23EPCF
1BHF.BLFS
+11$
 
						

							E-24
BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]
“AUDIO” selected in the main menu screen
“Balance” selected in the AUDIO Menu
screen
You can make changes to all audio adjustment options in the AUDIO Menu.
The changes you make will be stored for the selected input mode.  Therefore, you need to select a desired input mode before making any
changes.
Press .
The main menu screen will appear.
Press  or  to select “AUDIO”.
Each time you press  or , one of the available
menus appears in the following sequence:
The AUDIO Menu screen will appear.
Press  or  to select
“Balance”.
Press 
 .
The “Balance” adjustment screen will appear.
Press  or  to adjust the
balance.
 : Higher volume from the right-hand speaker
 : Higher volume from the left-hand speaker
Press  to store.
Press 
  when you finish.
*Repeat steps 3 to 6 when you wish to make
changes to other options.
*Audio Input menu will not be displayed when
“No Audio” is selected. (See P. E-30.)








1
2
3
4
5
6
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT
ADJUSTING AUDIO (AUDIO MENU)

&1MBTNBXJEF
	
03.10.3, 0:17 PM Page 24EPCF
1BHF.BLFS
+11$
 
						

							English
E-25
Adjusting Treble (Treble)
Press   to make adjustments.
 : Stronger treble
 : Weaker treble
Adjusting Bass (Bass)
Press   to make adjustments.
 : Stronger bass
 : Weaker bass
Adjusting Volume Balance (Balance)
Press   to make adjustments.
 : Higher volume from the right-hand speaker
 : Higher volume from the left-hand speaker
Setting Loudness (Loudness)
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press 
 or , one of the available choices appears in the following
sequence:
On 
 Off
On : Corrects bass and treble.
Off : Loudness dose not function.
 AUDIO Menu screen
* On-screen information disappears if you do not take any action for about 60 seconds.
*Functions may not be available with some models and some device options.
*The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.

&1MBTNBXJEF
	
03.10.3, 0:17 PM Page 25EPCF
1BHF.BLFS
+11$
 
						

							E-26
OTHER ADJUSTMENTS (FEATURES MENU)
BASIC OPERATION [EX. : SELECTING LANGUAGE (Language)]
You can make the following changes  in the FEATURES Menu.
“FEATURES” selected in the main menu
screen
On Screen Menu screen
“Language” selection screen
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT
1
2
3
4
5
6
7
8
Press .
The main menu screen will appear.
Press  or  to select
“FEATURES”.
Each time you press  or , one of the available
menus appears in the following sequence:
The FEATURES Menu screen will appear.
Press  or  to select “On
Screen Menu”.
•Select a desired option for adjustment/setup from
Adjustment, Function, On Screen Menu, Input
Terminal and Others.
Press .
•On Screen Menu appears.
Press  or  to select
“Language”.
Press 
.
The “Language” selection screen will appear.
Press  or  to select the
language.
Press 
.
The menu is displayed in the selected language.
Press   when you finish.
*Repeat steps 3 to 8 when you wish to make changes
to other options.

&1MBTNBXJEF
	
03.10.3, 0:18 PM Page 26EPCF
1BHF.BLFS
+11$
 
						

							English
E-27
• FEATURES setup screen has the following 5 options.
Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
Function : Allows setting of 24-frame mode. (See P. E-28.)
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-28.)
Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-29.)
Others : Can make other settings. (See P. E-30–E-32.)
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with 
 , and then adjust with  . Finally, press  to implement the adjustments.
* On-screen information disappears if you do not take any action for about 60 seconds.
*Functions may not be available with some models and some device options.
*The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
Adjustment Item Contents of Adjustments Operation
Dot Clock
(RGB2)
Clock Phase
(RGB2)
Clamp Position
(RGB2, Comp.
video)
Auto Calibration
(RGB2)You may find the vertically-striped pattern in pictures,
depending on the clock frequency of your PC’s processor.
If you experience blurring, you can obtain a clearer picture by
adjusting the “Dot Clock”.
Pictures and the outline of letters may blur or flicker as the clock
phase of your PC may be different. In this case, adjust the clock
phase manually. Normally, the automatic setting ensures the
optimal value.
Adjusts the extremely dark or bright pictures. Normally, the
automatic setting ensures the optimal value.
Adjusts the dynamic range of images to the optimum. Performed
while a white screen signal is received.Use 
  to adjust to minimize vertically-striped
pattern in pictures.
Use   to adjust to minimize pictures blur.
Use   to adjust pictures optimally.
Display the Auto Calibration screen and select
Execute, and then use 
  to select the item.

&1MBTNBXJEF
	
03.10.3, 0:18 PM Page 27EPCF
1BHF.BLFS
+11$
 
						

							E-28
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
•Setting Display Information (OSD)
You can use this option to select whether to display information other than menus.  (Error messages
are displayed regardless of what choice you make for this option.)
Each time you press 
 or , one of the available choices appears in the following sequence:
On (OSD:bright): On-screen information shown in light color.
On (OSD:dark): On-screen information shown in dark color.
Off: Except for menus and error messages, on-screen information is not displayed.
Press 
 to store.
• Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press 
 .
The “Language” selection screen will appear.
(2) Press 
 or  to select your desired language.
ÔŠ  (Japanese)
English
Deutsch (German)
Español (Spanish)
Français (French)
Italiano (Italian)
Português (Portuguese)
(3) Press 
.
The menu is displayed in the selected language.
• Selection of indications
You can change the settings for indications for video inputs and RGB inputs.
V ideo input
You can change the settings for indications for the VIDEO inputs.
Select the desired indication in accordance with the connected equipment\
.
Each time 
  is pressed, the setting is switched. (In the case of VIDEO1)
Press  to store.
RGB input
Y ou can change the settings for indications for the RGB inputs.
Select the desired indication in accordance with the connected equipment\
.
Each time 
  is pressed, the setting is switched. (In the case of RGB 1)
Press  to store.
ON SCREEN MENU
“Language” selection screen
• Displaying the optimum movie pictures (24 Frame Mode) for Video
Can make the optimum display of 24 frames/second signals such as movie pictures.
Each time you press 
 or , one of the available choices appears in the following sequence:
On 
 Off
On : Displays the optimum movie pictures.
Off : Displays normal pictures.
Press 
 to store.
* Some type of signal can not be selected.
FUNCTION
OSD selection screen

&1MBTNBXJEF
	
 03.10.7, 3:08 PM
Page 28 EPCF
1BHF.BLFS
+11$