Fujitsu P63xha51 Users Manual
Here you can view all the pages of manual Fujitsu P63xha51 Users Manual. The Fujitsu manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
English Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions (see the separate Safety Precautions manual). Keep this manual where the user can see it easily. * Installation and removal require special expertise. Consult your product dealer for details. * When “English” is selected at “Language” of the on-screen display, “colour”...
Page 2
E-2 CONTENTS INFORMATION ................................................................ E-3 CHECKING ACCESSORIES ................................................ E-3 INSTALLATION ............................................................... E-4 ATTACHING THE FERRITE CORES ................................... E-4 PART NAMES AND FUNCTIONS ................................... E-5 DISPLAY SECTION – FRONT ............................................. E-5 DISPLAY SECTION – BACK...
Page 3
E-3 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 INFORMATION • Receptacle Make sure that the power cord’s grounding wire is grounded. The plasma display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. • Have the plasma display inspected and cleaned by your dealer at regular intervals. • Do not display the same picture for a long...
Page 4
E-4 INSTALLATION • To prevent the plasma display’s internal components from overheating, make sure that the plasma display is installed in a well-ventilated location. • Be sure to use the optional stand, wall-mounting unit or the other mounting unit when installing the plasma display. Also, be sure that your dealer performs the installation. • See the appropriate instruction manual for additional information on the mounting hardware you select. • To prevent an accident and ensure safety in the event of...
Page 5
E-5 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT Input mode selection button Switches the input modes (Video mode and RGB mode). Volume button Adjusts the sound volume. Wide screen selection button Switches the screen over to a desired wide screen. Power indicator lamp This lamp shows the state of the power supply. Lit (red): Stand-by state Lit (green): Power ON state Flashing (red or green): Malfunction (Flashes differently...
Page 6
E-6 PART NAMES AND FUNCTIONS (Continued) / I power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out. *Power is still supplied to parts of the display even if the indicator lamp is off. HDMI input terminal (VIDEO5 INPUT/HDMI) HDMI input...
Page 7
E-7 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 DESCRIPTION OF INPUT TERMINALS mD-sub input terminal (RGB1 INPUT/mD-sub)Pin No. Input signal Pin No. Input signal 1Red 9— 2 Green 10 Ground 3Blue 11— 4— 12— 5 Ground 13 Horizontal synchronization 6 Ground 14 Vertical synchronization 7 Ground 15 — 8 Ground Frame Ground RS-232C terminal (RS-232C)Pin No. Signal 1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 TD (Transmit Data) 4 DTR (Data Terminal ready) 5 GND (Ground) 6 DSR...
Page 8
E-8 PART NAMES AND FUNCTIONS (Continued) For details, see page Î REMOTE CONTROL button Î E-11 Switches between Power On and Standby. - (MUTE button) Î E-11 Press to temporarily mute the audio. To return the audio to normal, press this button once again, or press the 1 does the 2 work also. 3 (DISPLAY button) Î E-12 Press to display the input mode and screen size status. The status is displayed for about five seconds. 4 (PICTURE MODE button) Î E-12 Press to switch the Picture Mode. 5...
Page 9
E-9 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 USING THE REMOTE CONTROL To prevent malfunction, do not apply any form of severe shock to the remote control. To prevent malfunction or deformation, do not allow the remote control to become wet and keep it away from hot surfaces or heating equipment. Do not clean the remote control using a cloth dampened in a volatile solvent, such as benzene or thinner. When using the remote control, be sure to point it directly at the plasma...
Page 10
E-10 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT • Connect the video signal cable to the HDMI input terminal, component video input terminal, S-video input terminal, or the video input terminal. •If the equipment to be connected is equipped with HDMI output terminal and component video output terminal, it is recommended to connect to one side or the other. (If the HDMI output is connected, an Audio signal cable does not need to be connected.) • Connect the video signal cable to either the S-video...