Fujitsu Xa1 User Manual

95
Connections
 Viewing Pictures on a Computer Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed, 
organized, and printed.  Before proceeding, install the software as described below.  Do 
NOT connect 
the camera to the computer until installation is complete.
 Windows: Installing MyFinePix Studio Windows: Installing MyFinePix Studio
 1  Confi rm that the computer meets the following system requirements:
Windows 8/Windows 7...

96
Viewing Pictures on a Computer
 3  Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
  Windows 8/Windows 7/Windows Vista  Windows 8/Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click  SETUP.EXE.  A “User Account Control” dialog will then be displayed; 
click Ye s  ( Windows 8/Windows 7) or  Allow ( Windows Vista).
 The installer will start automatically; click Install MyFinePix Studio  and follow the on-screen in-
structions to install MyFinePix...

97
Connections
Viewing Pictures on a Computer
 Macintosh: Installing RAW FILE CONVERTER Macintosh: Installing RAW FILE CONVERTER
RAW FILE CONVERTER is used to view RAW images on your computer.
 1  Confi rm that the computer meets the following system requirements:
CPUCPUIntel (Core 2 Duo or better)
OSOSPre-installed copies of Mac OS X version 10.6–10.8 (visit http://www.fujifilm.com/support/digital_cameras/
compatibility/ for more information).
RAMRAM
1 GB or more
Free disk spaceFree disk space A minimum...

98
Viewing Pictures on a Computer
 Connecting the Camera Connecting the Camera
 1  Find a memory card containing pictures you want to copy to the computer and insert the card into the camera (P 13).
 
R Windows users may require the Windows CD when starting the software for the fi rst time.
 
Q Loss of power during transfer could result in loss of data or damage to the memory card.  Insert a fresh or 
fully-charged battery before connecting the camera.
 2  Turn the camera off   and connect a USB cable...

99
Connections
Viewing Pictures on a Computer
 
Q If a memory card containing a large number of images is inserted, there may be a delay before the software 
starts and you may be unable to import or save images.  Use a memory card reader to transfer pictures.
 
Q Make sure that the computer does not display a message stating that copying is in progress and that the indi-
cator lamp is out before turning the camera off   or disconnecting the USB cable (if the number of images cop-
ied is very large, the...

100
Printing Pictures via USBPrinting Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and 
pictures can be printed without fi  rst being copied to a computer.  Note that depending on the 
printer, not all the functions described below may be supported.
 Connecting the Camera Connecting the Camera
 1 Connect a USB cable (available separately from third-party suppliers) as shown and turn 
the printer on.
 
Q The USB cable must be no more than 1.5 m...

101
Connections
Printing Pictures via USB
  Printing the Date of Recording  Printing the Date of Recording
To print the date of recording on pictures, press 
DISP/BACK in the PictBridge display and select PRINT 
WITH DATE 
s (to print pictures without the date of 
recording, select PRINT WITHOUT DATE).  To ensure 
that the date is correct, set the camera clock before 
taking pictures.  Some printers do not support date 
printing.  See the printer manual for details.
 Printing the DPOF Print Order...

102
Printing Pictures via USB
  During Printing During Printing
The message shown at right is 
displayed during printing.  Press 
DISP/BACK to cancel before all 
pictures are printed (depending 
on the printer, printing may end 
before the current picture has 
printed).
If printing is interrupted, turn the camera off    and 
then on again.
  Disconnecting the Camera  Disconnecting the Camera
Confi  rm that the above message is not displayed and 
turn the camera off .  Disconnect the USB cable.
 Creating...

103
Connections
Printing Pictures via USB
 
■ WITH DATE  s/ WITHOUT  DATE
To modify the DPOF print order, select K  PRINT 
ORDER (DPOF) in the playback menu and press 
the selector up or down to highlight WITH 
DATE  s or WITHOUT DATE.
2
PLAYBACK MENU
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH
PRINT ORDER (DPOF)
DISP ASPECT
WIRELESS TRANSFER
PC AUTO SAVE
Y
WITH DATE sWITHOUT DATE
RESET ALL
WITH DATE  s: Print date of recording 
on pictures.
WITHOUT DATE: Print pictures without 
date.
Press MENU/OK...

104
Printing Pictures via USB
 
■ RESET ALL
To cancel the current print 
order, select RESET ALL for 
K  PRINT ORDER (DPOF) .  The 
confi rmation shown at right 
will be displayed; press  MENU/OK 
to remove all pictures from the 
order.
 
R Print orders can contain a maximum of 999 pictures.
 
R If a memory card is inserted 
containing a print order cre-
ated by another camera, the 
message shown at right will 
be displayed.  Pressing MENU/OK 
cancels the print order; a new 
print order must be created...