Garmin 2569lmtd Manual

							nüvi 2405/2505 Series Owner’s Manual 15 
Finding Parking
You can find detailed parking information and 
pricing information.
1 Select Where To? > Categories > Parking.
2 Select a parking location.
Using Photo Navigation
You can upload pictures onto your device or 
memory card that include location information 
and create routes to the pictured locations.
1 Connect your device to your computer (page 
61).
2 Go to http://connect.garmin.com/photos .
3 Follow the instructions on the Web site to 
select and load pictures.
4 Disconnect the device from the computer.
5 Turn on the device.
6 From the main menu, select Where To? > 
Saved > Photos.  A list of pictures with location information 
appears.
7 Select a picture.
Setting a Simulated Location
If you are indoors or not receiving satellite 
signals, you can use the GPS to set a simulated 
location.
1 Select Settings > Navigation.
2 Select GPS Simulator.
3 Select View Map.
4 Select an area on the map.
The address of the location appears at the 
bottom of the screen.
5 Select the address. 
6 Select Set Location. 
						

							16 nüvi 2405/2505 Series Owner’s Manual
Saving Locations
You can save locations so you can quickly find 
them and create routes to them. 
Saving a Location
1 
Find a location (page 9).
2 Select a location from the list.
3 Select .
4 Select  > Save. 
5 If necessary, enter a name, and select  Done.
Saving Your Current Location
1 
From the map, select the vehicle icon.
2 Select Save.
3 Enter a name, and select Done.
4 Select OK.
Starting a Route to a Saved Location
1 
Select Where To? > Saved.
2 If necessary, select a category, or select  All 
Categories.
3 Select a location.
4 Select Go!.
Editing a Saved Location
1 
Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select  > Edit.
6 Select an option:
•  Select Name.
•  Select Phone Number.
•  To assign categories to the Favorite, 
select  Categories.
•  To save a photo with the Favorite, select  
Assign Photo (page 45). 
						

							nüvi 2405/2505 Series Owner’s Manual 17 
• To change the symbol used to mark the 
Favorite on a map, select  Change Map 
Symbol.
7 Edit the information.
8 Select Done.
Assigning Categories to a Saved 
Location
You can add custom categories to organize your 
saved locations.
NOTE: Categories appear in the saved locations 
menu after you have saved more than 12 
locations.
1 Select Where To? > Saved.
2 Select a location.
3 Select .
4 Select  > Edit > Categories.
5 Enter one or more category names, 
separated by commas. Suggested categories appear below the text 
bar as you type. You can select a suggested 
word to use the suggestion.
6 Select Done.
Sharing a Saved Location
If you save the location of a business that is not 
in the map data, you can share the location with 
Garmin so that it can be added to future map 
updates and shared with the Garmin community. 
Shared locations are sent to Garmin when you 
connect your device to myGarmin using your 
computer.
1 Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select Share Place.
6 Enter one or more categories that apply to 
the location, and select 
Done. 
						

							18 nüvi 2405/2505 Series Owner’s Manual
7 Select Share.
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Where To? > Saved.
2 Select  > Delete Saved Places.
3 Select the box next to the saved locations to 
delete, and select Delete.
Voice Command
About Voice Commands
NOTE: Voice Command is not available on all 
models, or for all languages and regions.
Voice Command allows you to use your device 
by saying words and commands. The Voice 
Command menu provides voice prompts and a 
list of available commands.
Setting your Wakeup Phrase
The wakeup phrase is a word or phrase you can 
say to activate Voice Command. The default 
wakeup phrase is Voice Command. 
TIP: You can reduce the chance of accidental 
Voice Command activation by using a strong 
wakeup phrase.
1 Select Apps > Voice Command > 
Customize Phrase.
2 Enter a new wakeup phrase.
The device indicates the strength of the 
wakeup phrase as you enter the phrase.
3 Select Done.
Activating Voice Command
Say your wakeup phrase. 
The Voice Command menu appears. 
						

							nüvi 2405/2505 Series Owner’s Manual 19 
Voice Command Tips
• Speak in a normal voice directed at the 
device.
•  Reduce background noise, such as voices 
or the radio, to increase the accuracy of the 
voice recognition.
•  Speak commands as they appear on the 
screen.
•  Respond to voice prompts from the device 
as needed.
•  Increase the length of your wakeup phrase 
to reduce the chance of accidental Voice 
Command activation.
•  Listen for two tones to confirm when the 
device enters and exits Voice Command 
mode.
Starting a Route Using Voice Command
You can say the names of popular, well-known 
locations. 
1 Say your wakeup phrase ( page 18). 
2 Say Find Place.
3 Listen for the voice prompt, and speak the 
name of the location. 
A list of locations appears.  
						

							20 nüvi 2405/2505 Series Owner’s Manual
4 Say the line number. 
5 Say Navigate.
Finding an Address
1 
Say Voice Command. 
2 Say Find Address.
3 Speak the entire address.
Muting Instructions
You can disable the voice prompts for Voice 
Command without muting the device.
1 Select Apps > Voice Command > .
2 Select Mute Instructions > Enabled.
Disabling Voice Command
You can disable Voice Command, which 
prevents you from accidentally activating Voice 
Command while speaking.
1 Select Apps > Voice Command > .
2 Select Voice Command > Disabled. 
						

							nüvi 2405/2505 Series Owner’s Manual 21 
Navigation
Starting a Route
1 Search for a location (page 8).
2 Select a location.
3 Select Go!.
4 If necessary, select an option.
• Select Drive.
•  Select Walk.
•  Select  Public Transit  to calculate a route 
that combines public transit and walking.
NOTE: You must have  cityXplorer
™ maps 
loaded to navigate using public transit 
(page 25).
5 If necessary, select a route.
Starting a Route to a Saved Location
1 
Select Where To? > Saved.
2 If necessary, select a category, or select  All 
Categories.
3 Select a location.
4 Select Go!.
Using Multiple Route Preview
1 
Search for a location.
2 Select a location.
3 Select Routes and, if necessary, select 
Drive (page 9).
4 Use the on-screen buttons to select a route
5 Select Go!. 
						

							22 nüvi 2405/2505 Series Owner’s Manual
Following an Automobile Route
The route is marked with a magenta line. A 
checkered flag marks your destination. 
As you travel, the device guides you to the 
destination with voice prompts, arrows on the 
map, and directions at the top of the map. If 
you depart from the original route, the device 
recalculates the route and provides new 
directions. 
Using the Navigation Map
1 
From the main menu, select View Map.
2 If the zoom controls are hidden, select the 
map to display the zoom controls.
3 Select the map to switch to browsing mode.
Map buttons appear.
4 Select an option:
• To zoom in or out, select 
 or .
•  To rotate the map view, select 
.
•  To switch between North Up and 3-D 
view, select 
.
•  To add or remove map layers, select 
.
•  To view specific location categories, 
select 
 and select a category icon.
•  To center the map on your current 
location, select 
. 
						

							nüvi 2405/2505 Series Owner’s Manual 23 
• To view shortcuts for map and navigation 
features, select .
Adding a Point to a Route
Before you can add a stop to a route, you must 
be navigating a route in Automobile mode.
1 While navigating a route, select  to return 
to the main menu.
2 Select Where To?. 
3 Search for the location ( page 9).
4 Select Go!.
5 Select Add to Active Route.
Taking a Detour
While navigating an automobile route, you can 
use detours to avoid obstacles ahead of you, 
such as construction zones.
NOTE: If the route you are currently navigating 
is the only reasonable option, your device might 
not calculate a detour.  From the map, select 
 > Detour. 
Stopping the Route
From the map, select  > .
About Exit Services
While you navigate a route, you can find gas, 
food, lodging, and restrooms near upcoming 
exits. 
Services are listed under tabs by category.
Navigating to an Exit
1 
From the map, select  > Exit Services.
2 Use  and  to select an exit.
3 Select  > Go!.
Finding Exit Services
1 
From the map, select  > Exit Services.
2 Use  and  to select an upcoming exit.
3 Select an exit service tab: 
						

							24 nüvi 2405/2505 Series Owner’s Manual
• To view nearby gas stations, select .
•  To view nearby restaurants, select 
.
•  To view nearby lodging, select 
.
•  To view nearby restrooms, select 
.
4 Select a point of interest.
Avoiding Road Features
1 Select Settings > Navigation > 
Avoidances.
2 Select the road features to avoid on your 
routes, and select  Save.
Avoiding Transit Types
NOTE: Transit types are available when 
cityXplorer maps are loaded ( page 25).
1 Select Settings > Navigation > Public 
Transit.
2 Select the transit type to avoid on your 
routes.
3 Select Save.
Navigating Off Road
If you are not following roadways as you 
navigate, you can use Off Road mode. 
1 Select Settings > Navigation.
2 Select Calculation Mode > Off Road > 
Save. 
The route will be calculated as a straight line 
to the location.
Pedestrian Routes
Following a Pedestrian Route
In Pedestrian mode, your route is displayed on a 
two-dimensional map. 
If you have cityXplorer maps installed, 
the device calculates a route that uses a 
combination of public transit options, such as 
riding a bus or subway, and walking.