Garmin Nuvi 2595lmt 5 Manual

							nüvi 2405/2505 Series Owner’s Manual 25 
NOTE: cityXplorer maps are not included with 
the device. Go to http://my.garmin.com  to 
purchase cityXplorer maps.
NOTE: You can change the types of public 
transit and limit the distance spent walking 
during a pedestrian route ( page 63).
Using the Pedestrian Navigation Map
See page 22 for more map functions.
➋
➊
• Select ➊ to switch between sections of the 
route. 
•  Select 
➋ to view the route itinerary. 
About Map Icons
• When you are navigating in Pedestrian 
mode,  indicates your approximate 
position and your direction of travel on the 
map.
•  The circle around 
 indicates the accuracy 
of your position on the map. A smaller 
circle means the displayed position is more 
accurate.
•  The yellow icons indicate the navigation 
method used in each section of the route. 
For example, when you see 
, board a bus 
at that point in the route.
•  The black dots on the map are public transit 
stops along your route. 
Enabling Transit Types
NOTE: Transit types are available when 
cityXplorer maps are loaded ( page 25).
1 Select Settings > Navigation > Public 
Transit. 
						

							26 nüvi 2405/2505 Series Owner’s Manual
2 Select the transit type to include in your 
routes, and select Save.
Map Pages
Customizing the Map
Customizing the Map Layers
You can customize which data appear on the 
map, such as icons for points of interest and 
road conditions.
1 From the map, select . 
2 Select Map Layers.
3 Select which layers you want to include on 
the map, and select  Save.
Viewing the Trip Log
Your device keeps a trip log, which is a record of 
the path you have traveled.
1 Select Settings > Map and Vehicle > Map 
Layers.
2 Select the Trip Log check box. 
Changing the Map Data Field
1 
From the map, select the data field in the 
lower left-hand corner.
2 Select a type of data to display.
3 Select Save.
Changing the Map Perspective
1 
Select Settings > Map and Vehicle > 
Driving Map View.
2 Select an option:
•  Select Track Up to display the map in 
two dimensions (2-D), with your direction 
of travel at the top.
•  Select North Up  to display the map in 
2-D with North at the top. 
						

							nüvi 2405/2505 Series Owner’s Manual 27 
• Select 3-D to display the map in three 
dimensions.
Changing the Tools on the Map
Map tools appear as buttons on the map, which 
provide quick access to device functions. For 
example, you can add a button to take a detour, 
adjust the brightness, or view exit services. You 
can select up to three tools to display on the 
map.
1 From the main menu, select  Settings > Map 
and Vehicle > Map Buttons.
2  Select an option:
• 
To add a tool, select 
, and select a 
tool. 
•  To remove a tool, select the tool, and 
select  Remove. 
•  To reset to the default tools, select  Reset 
to Defaults.
3  Select Save. 
Changing the Map Dashboard
1
 Select Settings > Map and Vehicle > 
Dashboards.
2  Use the arrows to select a dashboard.
3 Select Save. 
Viewing Turns
Viewing a List of Turns
When you are navigating a route, 
you can view 
all of the turns and maneuvers for your entire 
route and the distance between turns. 
1 Select the text bar on the top of the map.
2 Select a turn. 
						

							28 nüvi 2405/2505 Series Owner’s Manual
The details for the turn appear. If available, 
an image of the junction appears for 
junctions on major roadways.
Viewing the Entire Route on the Map
1 While navigating an automobile route, select 
the navigation bar at the top of the map.
2 Select  > Map.
Viewing the Next Turn
While navigating an automobile route, a preview 
of the next turn, lane change, or other maneuver 
appears in the upper-left corner of the map. 
The preview includes the distance to the turn or 
maneuver and the lane in which you should be 
traveling, if available. From the map, select 
 to view the next 
turn on the map. 
Viewing Junctions
While navigating an automobile route, you can 
view the junctions on major roadways. When 
you approach a junction in a route, the image of 
that junction appears briefly, if available. 
From the map, select 
 to view the 
junction, if available.  
						

							nüvi 2405/2505 Series Owner’s Manual 29 
Viewing Traffic Alerts
While you navigate an automobile route, a traffic 
alert may appear in the navigation bar. 
Select the alert to view more information.
Viewing Trip Information 
The trip information page displays your present 
speed and provides statistics about your trip. 
TIP: If you make frequent stops, leave the 
device turned on so it can accurately measure 
elapsed time during the trip. From the map, select 
 > Trip Computer.
Resetting Trip Information
1 From the map, select  > Trip Computer .
2 Select Reset Field(s).
3 Select an option:
• When not navigating a route, select 
Select All to reset every data field, 
except the speedometer, on the page.
•  Select Reset Trip Data to reset the 
information on the trip computer. 
•  Select Reset Max� Speed to reset the 
maximum speed.
•  Select Reset Trip B to reset the 
odometer. 
						

							30 nüvi 2405/2505 Series Owner’s Manual
Viewing Current Location 
Information
Use the Where Am I? page to view information 
about your current location. This feature is 
helpful if you need to tell emergency personnel 
your location. 
From the map, select 
 > Where Am I?.
Finding Nearby Services
1 
From the map, select  > Where Am I?. 
2 Select Hospitals, Police Stations, or Fuel 
to view the nearest locations in that category.
Hands-Free Phone Calls
About Hands-Free Calling
Using Bluetooth® wireless technology, your 
device can connect to your mobile phone to 
become a hands-free device. To determine 
whether your mobile phone with Bluetooth 
technology is compatible with your device, go to 
www.garmin.com/bluetooth .
Your phone may not support all of the hands-
free phone features your device provides.
Enabling Bluetooth Wireless Technology
1 
Select Settings > Bluetooth.
2 Select Bluetooth. 
						

							nüvi 2405/2505 Series Owner’s Manual 31 
Pairing Your Phone
Before you can use hands-free calling, you must 
pair your device with a compatible mobile phone. 
Pairing your phone with your device allows your 
phone and device to recognize each other and 
connect quickly. 
1 Place your phone and your device within 
33 ft. (10 m) of each other. 
2 On your device, enable Bluetooth wireless 
technology (page 30).
3 Select an option:
• Select Add Phone.
•  If you have already paired a different 
phone, select  Phone > 
.
4 On your phone, enable Bluetooth wireless 
technology.
5 On your device, select  OK.
A list of nearby Bluetooth devices appears.
6 Select your phone from the list, and select 
OK.
7 If necessary, on your phone, confirm that the 
device is allowed to connect.
8 If necessary, enter the device Bluetooth  PIN 
(1234) into your phone. 
Disconnecting Your Phone
1 
Select Settings > Bluetooth.
2 Select Phone > None > Save.
Your phone is disconnected from your device but 
remains paired with your device.
Tips After Pairing the Devices
•  After the initial pairing, the two devices can 
connect automatically each time you turn 
them on. 
•  When your phone is connected to your 
device, you can make phone calls. 
						

							32 nüvi 2405/2505 Series Owner’s Manual
• When you turn on the device, it tries to 
connect to the last phone to which it was 
connected.
•  You might need to set your mobile phone to 
connect to the device automatically when it 
is turned on.
Receiving a Call 
When you receive a call, select an option:
• Select Answer. 
•  Select Ignore to ignore the call.
Placing a Call
Dialing a Number
1 
Select Phone > Dial. 
2 Enter the number.
3 Select Dial.
Calling a Contact in Your in your Phone 
Book
Your phone book is loaded from your phone to 
the device each time your phone and the device 
connect. It may take a few minutes for the phone 
book to be available. Some phones do not 
support this feature.
1 Select Phone > Phone Book.
2 Select a contact.
3 Select Call.
Calling a Point of Interest
1 
Select Phone > Browse Categories. 
2 Select a point of interest ( page 9). 
3 Select Call. 
						

							nüvi 2405/2505 Series Owner’s Manual 33 
Using the Call History
Your call history is loaded from your phone to 
the device each time your phone and the device 
connect. It may take a few minutes for the call 
history to be available. Some phones do not 
support this feature.
1 Select Phone > Call History.
2 Select a category.
A list of calls appears, with the most recent 
calls at the top.
3 Select a call.
Using In-Call Options 
1 While on a call, select . 
2 Select an option:
• To transfer audio to your phone, select 
Handset.
TIP: You can use this feature if you want 
to turn off your device and remain on the 
call, or if you need privacy.
•  To display a keypad, select  Keypad. 
TIP: You can use this feature to use 
automated systems, such as voice mail.
•  To mute the microphone, select  Mute. 
•  To hang up, select  End Call. 
						

							34 nüvi 2405/2505 Series Owner’s Manual
Saving a Home Phone Number
TIP: After you save a home number, you can 
edit the home number by editing “Home” in your 
list of saved locations (page 16).
Select Phone > 
 > Set Home Number , 
enter your phone number, and select  Done. 
Calling Home
Before you can call home using the Call Home 
button, you must enter a phone number for your 
home location.
Select Phone > Call Home. 
Using the  Apps
Using Help
Select Apps > Help to view information 
about using the device. 
Searching Help Topics
Select Apps > Help > .
About Smartphone Link
Smartphone Link is a phone application that 
allows your device to download live data using 
your phone data connection. Your device 
transfers data from Smartphone Link using 
Bluetooth wireless technology.
Connecting to Smartphone Link provides access 
to Garmin Live Services. Garmin Live Services 
provides free and subscription-based plans to 
view live data on your device, such as traffic 
data, weather, and fuel prices