Garmin Rino 650 N Manual

Radio
Rino 650N Owner’s Manual  7
Radio Settings
Select Setup > Radio. 
•  Send Location—enables you to 
send your current location after 
each transmission ( page 9). 
•  Allow Polling —enables polling. 
Polling allows another Rino user to 
get your location by sending a poll  
request.
•  Power Level—adjusts power level 
on frequencies. 
•  Squelch  tone Mode:
 
◦ CtCSS —Continuous Tone 
Controlled Squelch System 
allows you to ignore unwanted 
calls from persons using the 
same channel. 
 
◦...

Radio
8 Rino 650N Owner’s Manual
Select oK to save the contact.
Editing Contacts
1. Select  Contacts.
2.  Select a contact.
3.  Select an item.
4.  Select 
.
Viewing Contacts on the Map
1. Select  Contacts.
2.  Select a contact.
3.  Select  View Map.
Notes
Note: Notes transmit to all users on 
your current channel and code. You can send notes to other Rino users 
on your current channel and code. You 
can review previously received notes 
from your contacts. You can edit and 
save favorite notes to...

Radio
Rino 650N Owner’s Manual  9
About Peer-to-Peer 
Positioning
Note: Locations may only be sent 
once every 30 seconds.
You can send your location to another 
Rino using peer-to-peer positioning. 
You can also track the movement of 
other Rino users and navigate to their 
locations. 
Enabling Peer-to-Peer 
Positioning
Select Setup > Radio > Send 
Location > on.
Sending a Location
Before you can send a location, you 
must enable peer-to-peer positioning 
(page 9).
1.  Select  Share Wirelessly > Send >...

Radio
10 Rino 650N Owner’s Manual
Radio StatusDescription
Radio -- Radio feature is off�
Radio 1W Transmit power at  
1 watts�
Radio 2W Transmit power at 
2 watts�
Radio 5W Transmit power at  
5 watts�
Note: If your device battery is too 
low, the power level is decreased 
automatically. 
Status BarDescription
The radio is on�
The radio is receiving�
The radio is transmitting�
Peer-to-peer is enabled 
and is ready to transmit 
the position�
The radio is muted  
(page 6)�  

Radio
Rino 650N Owner’s Manual  11
Waypoints and Tracks
Waypoints
Waypoints are locations you record and 
store in the device.
Creating a Waypoint
You can save your current location as 
a waypoint.
Select  Mark Waypoint. 
Finding a Waypoint
1. Select  Where  to? > Waypoints.
2.  Select a waypoint.
Editing a Waypoint
Before you can  edit a waypoint, you 
must create a waypoint.
1.  Select  Waypoint Manager.
2.  Select a waypoint.
3.  Select an item to edit.
4.  Enter the new information. 5. 
Select 
....

Waypoints and Tracks 
12 Rino 650N Owner’s Manual
About Sharing Data
Your device can send or receive data 
when connected to another compatible 
device. You can share waypoints, 
geocaches, routes, and tracks.
Sending and Receiving Data 
Wirelessly
Before you can share data wirelessly 
using ANT+™ wireless technology, you 
must be within 10 feet (3 m) of the 
compatible Garmin device.
1.  Select  Share Wirelessly.
2.  Follow the on-screen instructions.
Tracks
A track is a recording of your path. 
The...

Waypoints and Tracks 
Rino 650N Owner’s Manual  13
 Note: Using the Most often 
interval provides the most track 
detail and fills up the device 
memory quicker. 
Viewing the Current Track
The track being recorded is called the 
current track.
1. Select  track Manager > Current 
t rack.
2.  Select an option:
• To show the current track on the  
map, select  View Map.
•  To show the elevation plot 
for the current track, select 
elevation Plot .
Saving the Current Track
1. Select  track Manager > Current...

Waypoints and Tracks 
14 Rino 650N Owner’s Manual
Navigation
Navigating to a 
Destination
You can use the Where To? menu to 
find a destination to navigate to. Not all 
Where To? categories are available in 
all areas and maps. 
1. Select  Where  to?.
2.  Select an item. 
3.  Select  Go. 
4.  Navigate using the map ( page 15) 
or compass (page 15).
Searching Near a Location
You can use the search feature to find 
POIs near a point on the map, your 
current location, or a waypoint. This 
may require...

Navigation
Rino 650N Owner’s Manual  15
Map
 represents your location on the map. 
As you travel, the 
 moves. When you 
are navigating to a destination, your 
route is marked with a magenta line.
To customize the map settings, see 
page 25. To customize the map 
dashboard and data fields, see  page 22.
Using the Map
You can use the map to navigate an 
active route. 
1. Select  Map.
2.  Follow the magenta line to your 
destination.
Compass
The device has a 3-axis compass. You 
can use a bearing pointer...

Navigation
16 Rino 650N Owner’s Manual
Navigating with the Bearing 
Pointer
When navigating to a destination, 
the 
 bearing pointer points to your 
destination, regardless of the direction 
you are moving. 
1.  Begin navigation to a destination 
(page 14).
2.  Select  Compass .
3.  Turn until 
 points toward the 
top of the compass, and continue 
moving in that direction to the 
destination.
About the Course Pointer
The course pointer is most useful if you 
are navigating on water or where there 
are no...