Gigabyte Z97n Gaming 5 Manual
Have a look at the manual Gigabyte Z97n Gaming 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 32 Gigabyte manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 69
- 69 -
3-2 Installing the SATA RAID/AHCI Driver and Operating System
With the correct BIOS settings, you are ready to install the operating s\
ystem.
A. Installing the Operating System
As Windows 7 already include Intel SATA RAID/AHCI driver, you do not need to install separate RAID/AHCI driver during the Windows installation process. After the operating system is installed, we recommend that you install all required drivers from the motherboard driver disk using "Xpress Install" to ensure...](http://img.usermanuals.tech/thumb/30/104184/w64_d_1521204961-gigabyte-z97n-gaming-5-manual_d-68.png "Page 69
- 69 -
3-2 Installing the SATA RAID/AHCI Driver and Operating System
With the correct BIOS settings, you are ready to install the operating s\
ystem.
A. Installing the Operating System
As Windows 7 already include Intel SATA RAID/AHCI driver, you do not need to install separate RAID/AHCI driver during the Windows installation process. After the operating system is installed, we recommend that you install all required drivers from the motherboard driver disk using \"Xpress Install\" to ensure...")
![Page 70
- 70 -
Intel(R) Rapid Storage Technology - Option ROM - 13.0.0.2075Copyright (C) Intel Corporation. All Rights Reserved.
3. Reset Disks to Non-RAID4. Exit
RAID Volumes :None defined.
Physical Disks :ID Drive Model Serial # Size Type/Status(Vol ID)0 Hitachi HDS72105 JP1532FR3BWV7K 465.7GB Member Disk (0)1 Hitachi HDS72105 JP1532FR3ABMPK 465.7GB Non-RAID Disk
[hi]-Select [ESC]-Exit [ENTER]-Select Menu
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
1. Create RAID Volume2. Delete RAID...](http://img.usermanuals.tech/thumb/30/104184/w64_d_1521204961-gigabyte-z97n-gaming-5-manual_d-69.png "Page 70
- 70 -
Intel(R) Rapid Storage Technology - Option ROM - 13.0.0.2075Copyright (C) Intel Corporation. All Rights Reserved.
3. Reset Disks to Non-RAID4. Exit
RAID Volumes :None defined.
Physical Disks :ID Drive Model Serial # Size Type/Status(Vol ID)0 Hitachi HDS72105 JP1532FR3BWV7K 465.7GB Member Disk (0)1 Hitachi HDS72105 JP1532FR3ABMPK 465.7GB Non-RAID Disk
[hi]-Select [ESC]-Exit [ENTER]-Select Menu
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
1. Create RAID Volume2. Delete RAID...")
![Page 71
- 71 -
•Performing the Rebuild in the Operating SystemWhile in the operating system, make sure the chipset driver has been ins\
talled from the motherboard driver disk. Then launch the Intel® Rapid Storage Technology utility from the desktop.
Step 1:Go to the Manage menu and click Rebuild to another disk in Manage Volume.
The Status item on the left of the screen displays the rebuild progress.
Step 2:Select a new drive to rebuild the RAID and click Rebuild.
Step 3:After the RAID volume rebuilding, the...](http://img.usermanuals.tech/thumb/30/104184/w64_d_1521204961-gigabyte-z97n-gaming-5-manual_d-70.png "Page 71
- 71 -
•Performing the Rebuild in the Operating SystemWhile in the operating system, make sure the chipset driver has been ins\
talled from the motherboard driver disk. Then launch the Intel® Rapid Storage Technology utility from the desktop.
Step 1:Go to the Manage menu and click Rebuild to another disk in Manage Volume.
The Status item on the left of the screen displays the rebuild progress.
Step 2:Select a new drive to rebuild the RAID and click Rebuild.
Step 3:After the RAID volume rebuilding, the...")
![Page 72
- 72 -
•Restoring the Master Drive to a Previous State (for Recovery Volume only)When two hard drives are set to Recovery Volume in Update on Request mode, you can restore the master drive data to the last backup state when needed. For example, in case th\
e master drive detects a virus, you can restore the recovery drive data to the master drive.
Step 1:Select 4. Recovery Volume Options in the MAIN MENU of the Intel® RAID Configuration Utility. On the RECOVERY VOLUMES OPTIONS menu, select Enable Only...](http://img.usermanuals.tech/thumb/30/104184/w64_d_1521204961-gigabyte-z97n-gaming-5-manual_d-71.png "Page 72
- 72 -
•Restoring the Master Drive to a Previous State (for Recovery Volume only)When two hard drives are set to Recovery Volume in Update on Request mode, you can restore the master drive data to the last backup state when needed. For example, in case th\
e master drive detects a virus, you can restore the recovery drive data to the master drive.
Step 1:Select 4. Recovery Volume Options in the MAIN MENU of the Intel® RAID Configuration Utility. On the RECOVERY VOLUMES OPTIONS menu, select Enable Only...")
![Page 73
- 73 -
Chapter 4 Appendix
•Before installing the drivers, first install the operating system. (The following instructions use Windows 8.1 as the example operating system.) •After installing the operating system, insert the motherboard driver dis\
k into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the\
screen and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and execute the...](http://img.usermanuals.tech/thumb/30/104184/w64_d_1521204961-gigabyte-z97n-gaming-5-manual_d-72.png "Page 73
- 73 -
Chapter 4 Appendix
•Before installing the drivers, first install the operating system. (The following instructions use Windows 8.1 as the example operating system.) •After installing the operating system, insert the motherboard driver dis\
k into your optical drive. Click on the message \"Tap to choose what happens with this disc\" on the top-right corner of the\
screen and select \"Run Run.exe.\" (Or go to My Computer, double-click the optical drive and execute the...")
![Page 75
- 75 -
FCC Notice (U.S.A. Only)This equipment generates, uses, and can radiate radio frequency energy a\
nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct...](http://img.usermanuals.tech/thumb/30/104184/w64_d_1521204961-gigabyte-z97n-gaming-5-manual_d-74.png "Page 75
- 75 -
FCC Notice (U.S.A. Only)This equipment generates, uses, and can radiate radio frequency energy a\
nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct...")
![Page 76
- 76 -
Le gain d’antenne maximum permissible pour une utilisation avec ce produit est de 6 dBi afin d’être conforme aux limites de puissance isotropique rayonnée équivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionement point-à-point.Cet appareil numérique de la classe B est conforme à la norme NMB-003, No. 4, et CNR-210, No 4 (Dec 2000) et No 5 (Nov 2001).
« Pour empêcher que cet appareil cause du brouillage au service fa\
isant...](http://img.usermanuals.tech/thumb/30/104184/w64_d_1521204961-gigabyte-z97n-gaming-5-manual_d-75.png "Page 76
- 76 -
Le gain d’antenne maximum permissible pour une utilisation avec ce produit est de 6 dBi afin d’être conforme aux limites de puissance isotropique rayonnée équivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionement point-à-point.Cet appareil numérique de la classe B est conforme à la norme NMB-003, No. 4, et CNR-210, No 4 (Dec 2000) et No 5 (Nov 2001).
« Pour empêcher que cet appareil cause du brouillage au service fa\
isant...")
- 71 - •Performing the Rebuild in the Operating SystemWhile in the operating system, make sure the chipset driver has been ins\ talled from the motherboard driver disk. Then launch the Intel® Rapid Storage Technology utility from the desktop. Step 1:Go to the Manage menu and click Rebuild to another disk in Manage Volume. The Status item on the left of the screen displays the rebuild progress. Step 2:Select a new drive to rebuild the RAID and click Rebuild. Step 3:After the RAID volume rebuilding, the Status will display as Normal. &RQ
- 72 -
•Restoring the Master Drive to a Previous State (for Recovery Volume only)When two hard drives are set to Recovery Volume in Update on Request mode, you can restore the master drive data to the last backup state when needed. For example, in case th\
e master drive detects a virus, you can restore the recovery drive data to the master drive.
Step 1:Select 4. Recovery Volume Options in the MAIN MENU of the Intel® RAID Configuration Utility. On the RECOVERY VOLUMES OPTIONS menu, select Enable Only Recovery Disk to show the recovery drive in the operating system. Follow the on-screen instructions to complete and exit the RAID Configuration Utility.
Step 2:Go to the Manage menu of the Intel Rapid Storage Technology utility and click Recover data in Manage Volume.
Step 3:Click Yes to begin the data recovery.
The Status item on the left of the screen displays the rebuild progress.
Step 4:After the recovery volume is completed, the Status will display as Normal.
Intel(R) Rapid Storage Technology - Option ROM - 13.0.0.2075Copyright (C) Intel Corporation. All Rights Reserved.
Choose the RAID level:RAID0: Stripes data (performance).RAID1: Mirrors data (redundancy).Recovery: Copies data between a master and a recovery disk.RAID10: Mirrors data and stripes the mirror.RAID5: Stripes data and parity.
[hi]-select [ESC]-Previous Menu [ENTER]-Select
[ HELP ]
[ RECOVERY VOLUME OPTIONS ] 1. Enable Only Recovery Disk 2. Enable Only Master Disk [ SELECT RECOVERY VOLUME ]
[hi]-Up/Down [SPACE]-Selects [ENTER]-Done
Name Level Capacity Status Bootable` Volume0 Recovery(OnReq) 465.7GB NeedsUpdate Yes
Select a Recovery volume to do the operation.
&RQ
- 73 - Chapter 4 Appendix •Before installing the drivers, first install the operating system. (The following instructions use Windows 8.1 as the example operating system.) •After installing the operating system, insert the motherboard driver dis\ k into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the\ screen and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and execute the Run.exe program.) "Xpress Install" will automatically scan your system and then list all of the drivers that are recommended to install. You can click the Xpress Install button and "Xpress Install" will install all of the selected drivers. Or click the arrow icon to individually install the drivers you need. Drivers Installation For more software information, please visit GIGABYTE's website. Appendix
- 74 - Regulatory Statements Regulatory NoticesThis document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose.Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text. Also note that the information in this document is subject to change without notice and should not be construed as a commitment by GIGABYTE. Our Commitment to Preserving the EnvironmentIn addition to high-efficiency performance, all GIGABYTE motherboards fulfill European Union regulations for RoHS (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic Equipment) environmental directives, as well as most major worldwide safety requirements. To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, GIGABYTE provides the following information on how you can responsibly recycle or reuse most of the materials in your "end of life" product. Restriction of Hazardous Substances (RoHS) Directive StatementGIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic c\ hemicals. Waste Electrical & Electronic Equipment (WEEE) Directive StatementGIGABYTE will fulfill the national laws as interpreted from the 2002/96/EC WEEE (Waste Electrical and Electronic Equipment) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly. WEEE Symbol StatementThe symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve na\ tural resources and ensure that it is recycled in a manner that protects human\ health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling. ŠWhen your electrical or electronic equipment is no longer useful to you,\ "take it back" to your local or regional waste collection administration for recycling. ŠIf you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will \ be glad to help you with your effort. Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. Appendix
- 75 - FCC Notice (U.S.A. Only)This equipment generates, uses, and can radiate radio frequency energy a\ nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of \ the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult a dealer or experienced TV/radio technician for help.Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Neither the Dealer nor the Manufacturer are responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.CAUTION:Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Canada-Industry Canada (IC):This device complies with RSS210 of Industry Canada.Cet appareil se conforme à RSS210 de Canada d'Industrie. Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its ope\ ration in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in ord\ er to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. This Class B digital apparatus complies with Canadian ICES-003, Issue 4, and RSS-210, No 4 (Dec 2000) and No 5 (Nov 2001). "To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing." Attention : l’utilisation d’un réseau sans fil IEEE802.11a est réstreinte à une utilisation en intérieur à cause du fonctionement dans la bande de fréquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit utilisé à l’intérieur des bâtiments pour la bande de fréquence 5.15-5.25 GHz afin de réduire les possibilités d’interférences nuisibles aux canaux co-existants des systèmes de transmission satell\ ites. Les radars de puissances ont fait l’objet d’une allocation primaire de fréquences dans les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent créer des interférences avec ce produit et/ou lui être \ nuisible. Appendix
- 76 - Le gain d’antenne maximum permissible pour une utilisation avec ce produit est de 6 dBi afin d’être conforme aux limites de puissance isotropique rayonnée équivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionement point-à-point.Cet appareil numérique de la classe B est conforme à la norme NMB-003, No. 4, et CNR-210, No 4 (Dec 2000) et No 5 (Nov 2001). « Pour empêcher que cet appareil cause du brouillage au service fa\ isant l'objet d'une licence, il doit être utilisé a l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. » European Community Directive R&TTE Directive Compliance Statement:This equipment complies with all the requirements and other relevant provisions of Directive 1999/5/EC of the European Parliament and the Council of March 9, 1999 on Radio Equipment \ and Telecommunication Terminal Equipment (R&TTE).This equipment is suitable for home and office use in all the European Community Member States and EFTA Member States. The low band 5.15 -5.35 GHz is for indoor use only. France:Pour la France métropolitaine2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage intérieur2.400 - 2.454 GHz (canaux 1 à 7) autorisé en usage extérieurPour la Guyane et la Réunion2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage intérieur 2.420 - 2.4835 GHz (canaux 5 à 13) autorisé en usage extérieur Italy:The use of these equipments is regulated by:1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for outdoor use and article 105 (free use) for indoor use, in both cases for private use.2. D.M. 28.5.03, for supply to public of RLAN access to networks and telecom services.L’uso degli apparati è regolamentato da:1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività soggette ad autorizzazione generale) se utilizzati al di fuori del proprio fondo e 105 (libero uso) se utilizzati entro il proprio fondo, in entrambi i casi per uso private.2. D.M. 28.5.03, per la fornitura al pubblico dell’accesso R-LAN alle reti e ai servizi di telecomunicazioni. Appendix
- 77 - Taiwan NCC Wireless Statements / ÌÞ £ êFSJü: 低功率電波輻射性電機管理辦法 第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性及功能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 低功率射頻電機技術規範 4.7: 在5.25-5.35秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。 Korea KCC NCC Wireless Statement: 5,25GHz - 5,35 GHz 대역을 사용하는 무선 장치는 실내에서만 사용하도록 제한됩니다。 Japan Wireless Statement: 5.15GHz帯 ~ 5.35GHz帯: 屋内のみの使用。 Appendix
- 79 - Contact Us •GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New Taipei City 231,Taiwan TEL: +886-2-8912-4000 FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www.gigabyte.com WEB address (Chinese): http://www.gigabyte.tw •G.B.T. INC. - U.S.A. TEL: +1-626-854-9338 FAX: +1-626-854-9326 Tech. Support: http://ggts.gigabyte.com.tw Warranty Info: http://rma.gigabyte.us Web address: http://www.gigabyte.us •G.B.T. INC (USA) - Mexico Tel: +1-626-854-9338 x 215 (Soporte de habla hispano) FAX: +1-626-854-9326 Correo: [email protected] Tech. Support: http://rma.gigabyte.us Web address: http://latam.giga-byte.com •Giga-Byte SINGAPORE PTE. LTD. - Singapore WEB address : http://www.gigabyte.sg •Thailand WEB address : http://th.giga-byte.com •Vietnam WEB address : http://www.gigabyte.vn •NINGBO G.B.T. TECH. TRADING CO., LTD. - China WEB address : http://www.gigabyte.cn Shanghai TEL: +86-21-63400912 FAX: +86-21-63400682 Beijing TEL: +86-10-62102838 FAX: +86-10-62102848 Wuhan TEL: +86-27-87685981 FAX: +86-27-87579461 GuangZhou TEL: +86-20-87540700 FAX: +86-20-87544306 Chengdu TEL: +86-28-85483135 FAX: +86-28-85256822 Xian TEL: +86-29-85531943 FAX: +86-29-85510930 Shenyang TEL: +86-24-83992342 FAX: +86-24-83992102 •GIGABYTE TECHNOLOGY (INDIA) LIMITED - India WEB address : http://www.gigabyte.in •Saudi Arabia WEB address : http://www.gigabyte.com.sa •Gigabyte Technology Pty. Ltd. - Australia WEB address : http://www.gigabyte.com.au Appendix
- 80 - •GIGABYTE Global Service System To submit a technical or non-technical (Sales/Marketing) question, please link to:http://ggts.gigabyte.com.twThen select your language to enter the system. •G.B.T. TECHNOLOGY TRADING GMBH - Germany WEB address : http://www.gigabyte.de •G.B.T. TECH. CO., LTD. - U.K. WEB address : http://www.giga-byte.co.uk •Giga-Byte Technology B.V. - The Netherlands WEB address : http://www.giga-byte.nl •GIGABYTE TECHNOLOGY FRANCE - France WEB address : http://www.gigabyte.fr •Sweden WEB address : http://www.gigabyte.se •Italy WEB address : http://www.giga-byte.it •Spain WEB address : http://www.giga-byte.es •Greece WEB address : http://www.gigabyte.com.gr •Czech Republic WEB address : http://www.gigabyte.cz •Hungary WEB address : http://www.giga-byte.hu •Turkey WEB address : http://www.gigabyte.com.tr •Russia WEB address : http://www.gigabyte.ru •Poland WEB address : http://www.gigabyte.pl •Ukraine WEB address : http://www.gigabyte.ua •Romania WEB address : http://www.gigabyte.com.ro •Serbia WEB address : http://www.gigabyte.co.rs •Kazakhstan WEB address : http://www.gigabyte.kz You may go to the GIGABYTE website, select your language in the language list on the top right corner of the website. Appendix