Home > GoPro > Camera Accessories > GoPro 3d Hero System User Manual

GoPro 3d Hero System User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual GoPro 3d Hero System User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 54 GoPro manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							IMPortant safety  +  
    HanDlInG InforMatIon
    w ArNINGS 
    Failure to follow these safety instructions could result  
    in fire, electric shock, or other injury or damage to  
    the 3D Hero System or other property.
    Improper alignment of your 3D images or misuse of the 
    GoPro CineForm Studio software while viewing with 3D 
    glasses may cause eye strain or headaches.
    HANDLING
    The 3D HERO System contains sensitive components.  
    Do not drop, disassemble, open, crush, bend, deform,  
    puncture, shred, microwave, incinerate, paint, or insert  
    foreign objects into the cameras or 3D sync cable.  
    Do not use the 3D HERO System if it has been damaged. A
    VoIDING  wAter AND  wet eNVIroNmeNtS   
    wHeN  Not IN  wAter HoUSING
    Do not use the 3D sync cable in rain, near wash basins, or 
    in other wet locations when cameras are not inserted in the 
    water housing. Do not spill any food or liquid on the 3D sync 
    cable. If the 3D sync cable gets wet, unplug from camera and 
    allow it to dry thoroughly before using again. Do not attempt 
    to dry the 3D sync cable with an external heat source, such as 
    a microwave oven or hair dryer. Damage to the 3D sync cable 
    caused by contact with liquid is not covered under warranty.
    USING  CoNNeCtorS  AND PortS
    Never force a connector into a port. Check for obstructions in 
    the port. Make sure that the connector matches the port and 
    that you have positioned the connector correctly in relation 
    to the port.
    11  
    						
    							Warranty
    This product is guaranteed against manufacturing defects for one (1) year from the original date of purchase. GoPro’s sole obligation 
    in the event of such defects during this period is to repair or replace the defective part or product with a comparable part or 
    product at GoPro’s sole discretion. Except for such replacement, the sale, or other handling of this product is without warranty, 
    condition or other liability even though the defect or loss is caused by negligence or other fault. 
    Damage resulting from use, accident, or normal wear and tear is not covered by this or any warranty. GoPro assumes no liability 
    for any accident, injury, death, loss, or other claim related to or resulting from the use of this product. In no event shall GoPro be 
    liable for incidental or consequential damages relating to or resulting from the use of this product or any of its parts. Because of 
    possible user resealing error, this product is not warranted against waterhousing leakage or any resulting damage. 
    Visit gopro.com for more information.
    12 
    						
    All GoPro manuals Comments (0)

    Related Manuals for GoPro 3d Hero System User Manual