GoPro Lcd Bacpac User Manual

 LCD BacPac™
User ManUal + Warranty Info 

fIrMWare Update
To deter mine if a fir mware update is required, please 
follow these steps:
•  With the camera fully charged, attach the LCD 
BacPac
™ to camera and power camera on (see 
attachment instr uc tions on page 4). If the LCD 
screen powers on, you have the latest fir mware 
and no update is needed.
•   If the LCD BacPac does not power on,  
then you will need to download and install  
the latest fir mware for your camera at:  
gopro.com/firmware.
2  

lCd  BaCp aC featUres
1.  Seamlessly attaches to the back of  
HD HERO cameras.
2.   LCD screen allows for easy visual control  
of camera and settings.
3.   Fast for ward + fast rewind photos and video.
4. Integrated speaker for sound.
3  

asseMBlInG yoUr lCd  sCreen  to Hd Hero
AttAChing LCD BACP AC to hD hERo
1.   Slide hooked end of the BacPac (A) into the groove   
on the right side of the camera body (B).
2.    Push BacPac connector (C) into the HERO Bus port 
(D) on the back of the camera.
REmoving LCD BACP AC fRom hD hERo
1.   Pull back on left side of BacPac marked with the 
arrow to disconnect from the HERO bus port.
2.   Slide hooked end of BacPac (A) out of camera 
groove (B).
4
   

SwAPP ing hou Sing DooRS
To secure the HD HERO & LCD BacPac assembly into the 
housing, you will need to replace the standard back door 
with one of the included extended back doors. A total of 4 
doors are supplied with the LCD BacPac; 2 water proof 
doors (standard + wrist housing model s) and 2 
non-water proof doors (standard and wrist housing 
model s). The skeleton doors allow for better a udio a nd 
camera cooling when water proofing is not ne ed ed.
1.  0pen the backdoor of the housing so that it...

UsInG tHe lCd  BaCp aC
The camera’s default setting keeps the LCD screen  
powered on. Below are options to change how the  
LCD powers off.
CAmERA  SEt mEnu oPtionS — LCo  AnD LCf
Check Page 2, section “Firmware Update”, to ensure your 
camera has the necessary firmware update for your LCD 
screen. If so, proceed to Steps 1 & 2 below:
1.  LC o (default): LCD ON. This setting keeps the LCD 
screen powered on, continuously, while the camera 
is on. LCD will only power off if the camera is turned 
off or...

ADjuSt LCD SCREEn BRightnESS
1. Press and hold LCD button for 2 seconds to enter  
  LCD menu.
2.   Press power/mode button twice to highlight 
‘BRIGHTNESS’ menu button.
3.    Press shutter button repeatedly to adjust brightness.
PLA yBACk PhotoS
1.   Press and hold LCD button for 2 seconds to enter  
LCD menu.
2.   Press power/mode button once to highlight 
‘PHOTO’ menu option.
3.   Press shutter button and the first recorded photo 
will automatically be displayed.
4.   Press power/mode button to...

PLAyBACk viDEoS
1. Press and hold LCD button to enter LCD menu.
2. ‘VIDEO’ should already be highlighted.
3.   Press shutter button and the first recorded video 
will automatically start playing.
4.    During video playback, press and HOLD the   
power/mode button to Fast Forward the video 
playback. Releasing the power/mode button will 
resume normal playback.
5.   During video playback, press and HOLD the shutter 
button to Rewind the video playback. Releasing the 
button will resume normal playback....

IMportant safety and  
HandlInG  InforMatIon
WARNING: Failure to follow these safety instructions 
could result in fire, electric shock, or other injury or 
damage to the LCD BacPac or other property.
hAnDLing  
The LCD BacPac contains sensitive components. Do not 
drop, disassemble, open, crush, bend, deform, puncture, 
shred, microwave, incinerate, paint, or insert foreign 
objects into the LCD BacPac. Do not use the LCD BacPac 
if it has been damaged—for example, if LCD BacPac is 
cracked, punctured,...

AvoiDing wA tER AnD  wEt EnviRonmEntS   
whEn not in houSing
When not protected in the waterhousing, do not use the LCD 
BacPac in rain, or near washbasins or other wet locations. 
Take care not to spill any food or liquid on the LCD BacPac. 
In case the LCD BacPac gets wet, turn off and unplug from 
camera before cleaning, and allow it to dry thoroughly 
before using again. Do not attempt to dry the LCD BacPac 
with an external heat source, such as a microwave oven or 
hair dryer. Damage to the LCD...