GoPro Remo User Guide

							REMO (WATERPROOF VOICE  
ACTIVATED REMOTE)
CONTROL YOUR HERO5 CAMERA WITH YOUR VOICE 
FROM UP TO 33FT (10M) AWAY
USER GUIDE 
						

							1. Battery Status Light
2.  Power Button
3.  Shutter Button
4.  Wireless Status Light (blue) / Remo Status Light (red) 
To use all of the features described in this guide, update the 
software on both Remo and  your GoPro. 
STEP 1   
Down load Quik for desktop fro m gopro.com/apps .
STEP 2  
With Remo powered off, connect it to your computer.
STEP 3  
Press and hold the Shutter button for 8 seconds until the 
battery status light turns off.
STEP 4  
Open Quik and follow the on-screen instructions to update 
Remo.
STEP 5   
Update your camera software. For details, see the user manual 
for your camera.
THE BASICS
UPDATING REMO + CAMERA
1
43
2
POWERING ON
Press and hold the Power button.
Note: Beeps and lights mimic those on the camera.
POWERING OFF
Press and hold the Power button.
POWERING ON + OFF
When the battery status light turns red, charge Remo as shown 
below. The light turns green when charging is complete.
Fully charged in 80 min
CHARGING
3 sec
5 sec 
						

							PAIRING + SELECTING A LANGUAGE
Step 1  
Press the Mode button to get to Connection Settings, then 
select Connect New Device > Remo. 
Step 2   
With Remo powered off, press and hold the Power button until 
the blue light blin ks. 
Remo vibrates once when pairing is complete.
8 sec
Step 3  
If the language option appears on the camera, select the 
language that you want to use. Otherwise, Remo uses the 
language that you previously selected when using Voice Control 
on your camera.
Note: To change the Voice Control language, connect your camera to the 
Capture app. For details, see the HERO5 Session User Manual.
PAIRING
Step 1   
On the camera, s wipe down and then tap Connect > Connect 
New Device > Remo.
Step 2   
Wit h Remo powered off, press and hold the Power button until 
the blue light blin ks (about 8 seconds). 
Remo vibrates once and the camera displays a confirmation 
when pairing is complete.
8 sec
SELECTING A LANGUAGE
Remo uses the language that you previously selected when 
using Voice Control on your camera. If you did not yet select a 
Voice Control language on your camera, complete these steps.
Step 1   
Swipe down and then tap Preferences > Language (in the Voice 
Control section).
Step 2   
Tap a language.
SETTING UP HERO5 BLACK + REMOSETTING UP HERO5 SESSION + REMO
STEP 1   
Turn on wireless on your camera. For details, see the user manual for your camera. 
STEP 2  
Power on both devices to connect them. The wireless status light on Remo blinks slowly (blue).  
Note: You do not need to turn on your camera’s Voice Control feature to use Remo.
If the connection to the camera is lost, Remo emits a disconnection beep and the wireless status light blinks quickly. For best results, 
be sure that your camera and Remo are not blocked by walls or other obstacles.
CONNECTING REMO + YOUR CAMERA
CONTROLLING YOUR CAMERA
To control your camera with your voice, use the commands listed on the next page. Remo has a range of 33ft / 10m and is waterproof 
to 16ft / 5m.
Note: Voice Control performance may be impacted by distance or significant wind and noisy conditions. Keep the product clean and clear of debris.
STEP 1  
Power on Remo. 
3 sec
STEP 2   
While facing Remo, say a command from the list on the next 
page. Remo vibrates, beeps, and blinks when the command is 
understood.
PRO TIP: With Remo, you can say any command at any time. 
For example, if the camera is in Video mode and you want to 
capture burst photos, just say “GoPro shoot burst.” 
						

							LIST OF COMMANDS
ACTION COMMANDSDESCRIPTION
GoPro start recordingCaptures video
GoPro HiLightAdds a HiLight Tag to video
That was sickAdds a HiLight Tag to video
GoPro stop recordingStops capturing video
GoPro take a photoCaptures a single photo
GoPro shoot burstCaptures burst photos
GoPro start time lapseCaptures Time Lapse photos
GoPro stop time lapseStops capturing time lapse 
photos
GoPro turn offPowers off the camera
MODE COMMANDSDESCRIPTION
GoPro Video modeChanges the camera mode to 
Video (does not capture video)
GoPro Time Lapse mode Changes the camera mode to 
Time Lapse (does not capture 
time lapse photos)
GoPro Photo modeChanges the camera mode to 
Photo mode (does not capture 
photos)
GoPro Burst mode Changes the camera mode to 
Burst mode (does not capture 
burst photos)
PRO TIP: When Remo and the camera are on, you can press 
the Shutter button on Remo to begin capturing in the camera’s 
current mode.
For the most updated list of commands, visit gopro.com/help
. When your camera is off, you can quickly capture video and 
 
time lapse photos using the Shutter button on Remo.
STEP 1   
On your camera, press the Mode button to power it on.
STEP 2   
Say, “GoPro turn off” to power off your camera.
If Remo isn’t responding as expected, press and hold both 
buttons at the same time to reset it. 
Note: If you reset Remo, you need to re-pair it with your camera.
RESETTING REMO
QUIKCAPTURE
To see additional information regarding country certifications, 
refer to the Important Product + Safety Instructions included 
with Remo.
REGULATORY INFORMATION
STEP 3   
During your activity, use Remo for QuikCapture:
•  For video, press the Shutter button on Remo. 
•  For time lapse photos, press and hold the Shutter button   
for 2 seconds.
Remo vibrates, beeps, and blinks when capture begins.
PRO TIP: Once you power on your camera with the Mode 
button, then power it off with the Remo command, just say 
“GoPro turn on” to power it on again.
8 sec8 sec
R E VA