Hanns G Ha192abb Users Manual

							
 
 
 
 
HA192 
HSG1098
 
						

							
User’s Manual 
 
Before operating the monitor, please read this manual thoroughly. This manual should be retained for 
future reference. 
 
 
FCC Class B Radio Frequency Interference Statement   
 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures: 

						

							
                                                                    User’s Manual  
RECYCLING INFORMATION 
 
We, the Hanns.G care very much about our environment protection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, which can be re-decomposed and re-integrated into 
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned 
substances. We strongly encourage you to contact the provided information to recycle this product. 
 
For more information, please visit 
www.hannsg.com 
 
 
3 
 
						

							
User’s Manual 
 
TABLE OF CONTENTS 
 
SAFETY NOTICE........................................................................\
.......................... 5 
PRECAUTIONS........................................................................\
......................... 5 
SPECIAL NOTES ON LCD MONITORS ...................................................... 6 
BEFORE YOU OPERATE THE MONITOR ...................................................... 7 
FEATURES........................................................................\
................................. 7 
CHECKING THE CONTENTS OF THE PACKAGE .................................. 7 
INSTALLATION INSTRUCTIONS................................................................ 8 
POWER........................................................................\
....................................... 8 
SETTING THE MONITOR ON THE WALL ................................................ 9 
MAKING CONNECTIONS........................................................................\
.... 10 
DJUSTING THE VIEWING ANGLE .............................................................11 
OPERATING INSTRUCTIONS........................................................................\
. 12 
GENERAL INSTRUCTIONS........................................................................\
. 12 
FRONT PANEL CONTROL........................................................................\
.. 13 
HOW TO ADJUST A SETTINGS .................................................................. 15 
PLUG AND  PLAY........................................................................\
.................... 18 
TECHNICAL SUPPORT (FAQ) ........................................................................\
. 19 
Q & A FOR GENERAL PROBLEMS ........................................................... 19 
ERROR MESSAGE & POSSIBLE SOLUTIONS ....................................... 21 
APPENDIX........................................................................\
.................................... 23 
SPECIFICATIONS ........................................................................\
.................. 23 
 
4 
 
						

							
                                                                    User’s Manual  
SAFETY NOTICE 
 
1.  The changes or modifications not expressly approved by the party responsible for compliance 
could void the users authority to operate the equipment. 
2.  Shielded interface cables and AC power cord, if an y, must be used in order to comply with the 
emission limits. 
3.  The manufacturer is not responsible for any radio or TV interference caused by\
 unauthorized  modification to this equipment. It is the respons ibilities of the user to correct such interference. 
4.  Only use attachments/accesories specified by the manufacturer. 
 
WARNING: 
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high 
voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified 
personnel only. 
 
PRECAUTIONS 
• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry \
tub, 
swimming pool or in a wet basement. 
•  Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a 
person and cause serious damage to the appliance. Use only a cart or stand recommended by the 
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a 
mounting kit approved by the manufacturer and follow the kit instructions. 
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure 
reliable operation of the monitor and to protect it from overheating, be sure these openings are not 
blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place 
the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or 
cabinet unless proper ventilation is provided. 
•  The monitor should be operated only from the type of power source indicated on the label. If you 
are not sure of the type of power supplied to your home, consult your dealer or local power 
company. 
•  Unplug the unit during a lighting storm or when it will not be used for long period of time. This will protect the monitor from damage due to power surges. 
•  Do not overload power strips and extension cords.  Overloading can result in fire or electric shock. 
•  Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a 
fire or electric shock. Never spill liquids on the monitor. 
•  Do not attempt to service the monitor by yourself; opening or removing covers can expose you to 
dangerous voltages and other hazards. Please refer all servicing to qual\
ified service personnel. 
•    The wall socket shall be installed near the equipment and shall be easily accessible. 
 
5 
 
						

							
User’s Manual 
 
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
•  Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. 
•  You may find slightly uneven brightness on the screen depending on the desktop\
 pattern you use. 
•  The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time. 
•  Due to the nature of the LCD screen, an afteri mage of the previous screen may remain after 
switching the image, when the same image is displayed for hours. In this case, the screen is 
recovered slowly by changing the image or turning off the Power Switch for hours. 
•  If the screen suddenly flashes erratically or the backlighting fails, pl\
ease contact your dealer or  service center for repair. Do not attempt to repair the monitor yourself. 
 
Lamp Disposal 
 
 
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR 
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE 
INFORMATION, CONTACT THE ELEC TRONIC  INDUSTRIES ALLIANCE AT 
WWW.EIAE.ORG. 
FOR LAMP SPECIFIC DISPO SAL INFORMATION CHECK 
WWW.LAMPRECYCLE.ORG. 
 
6 
 
						

							
                                                                    User’s Manual  
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
•  48,3cm / 19” Wide Screen TFT Color LCD Monitor 
•  Crisp, Clear Display for Windows 
•  EPA ENERGY STAR® 
•  GP Green Product 
• Ergonomic Design 
•  Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
   
The product package should include the following items: 
LCD Monitor 
 
Cables and User manual 
   
Power Cord Warranty Card Quick Start Guide 
 
 
 
User’s Manual VGA Cable  
 
7 
 
						

							
User’s Manual 
 
INSTALLATION INSTRUCTIONS 
 
INSTALL  REMOVE 
 
 
 
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1.  Align the monitor with the opening in the base. 
2.  Note that the longer section of the base points forward. 
3.  Snap the monitor into its base. A clear click sound will affirm that the base is connected 
correctly. 
4.  Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base. 
 
REMOVAL: 
 
1.  Flip over the monitor so that it is upside down. 
2.  Press the 2 clips on the base that holds the monitor in place. 
3.  Gently press and hold the 2 clips while pulling the base from the monitor unit they are unattached. 
 
POWER 
 
POWER SOURCE: 
 
1.  Make sure that the power cord is the correct type required in your area.\
 
2.  This LCD monitor has an Internal universal power supply that allows operation in e\
ither         100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 
3.  Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other end to wall-outlet.  
 
8 
 
						

							
                                                                    User’s Manual  
SETTING THE MONITOR ON THE WALL 
DISSEMBLING THE STAND BASE: 
 
1.  Disconnect all the cables and cords from the Monitor to prevent breakage. 
2.  Carefully place the Monitor face down on a soft and flat surface (blank\
et, foam, cloth, etc) to 
prevent any damage to the Monitor. 
3.  Gently remove the stand base.   
     
 
(For reference only) 
 
WALL MOUNTING THE MONITOR: 
 
1.  Purchase a VESA compatible wall bracket: 
VESA 100X100, 4 holes, M4, 10mm, 8kg. 
2.  Locate your ideal Monitor position on the wall. 
3.  Fix the wall bracket firmly on the wall. 
4.  Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor. 
 
Note:  
• Please read the instructions of your specific wall bracket to properly w\
all mount the Monitor. 
• The pitch of the mounting holes is 100mm horizontally and 100mm vertically. 
• The screws type required is metric: M4, 10mm length. 
• The Monitor stand base can be screwed on a table or a hard surface using\
 the hole on the back of 
the stand base. 
 
*Installing the LCD Monitor requires special skill that should only be p\
erformed by qualified service 
personnel. Customers should not attempt to do the work themselves. Hanns\
.G bears no responsibility 
for improper mounting or mounting that results in accident or injury. Yo\
u can ask a qualified service 
personnel about using an optional bracket to mount the Monitor to the wa\
ll.  
 
9 
 
						

							
User’s Manual 
 
MAKING CONNECTIONS 
 
CONNECTING TO A PC 
 
Turn off your computer before performing the procedure below.   
 
1.  Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 
2.  Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to Wall outlet. 
3.  Turn on your monitor and computer. 
 
 
 
 
Figure.2. Connecting to a PC 
 
1 VGA Input 2 Power AC  Input 
 
 
 
 
 
 
10