Home > Hanns.G > Monitor > Hanns G Hx192rpb Users Manual

Hanns G Hx192rpb Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Hanns G Hx192rpb Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 55 Hanns.G manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
     
     
     
     
     
    19 inch TFT LCD Monitor 
     
     
     
     
     
     
     
     
     
     
     
     
      
     
    HX192 
    USER’S MANUAL 
     
     
    						
    							
    User’s Manual 
     
    Before operating the monitor, please read this manual thoroughly. This manual should be 
    retained for future reference. 
     
     
    FCC Class B Radio Frequency Interference Statement  
     
    This equipment has been tested and found to comply with the limits for a Class B digital 
    device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
    reasonable protection against harmful interference in a residential installation. This 
    equipment generates, uses and can radiate radio frequency energy, and if not installed and 
    used in accordance with the instructions, may cause harmful interference to radio 
    communications. However, there is no guarantee that interference will not occur in a 
    particular installation. If this equipment does cause harmful interference to radio or 
    television reception, which can be determined by turning the equipment off and on, the user 
    is encouraged to try to correct the interference by one or more of the following measures: 
    
    						
    							
    User’s Manual  
    Recycling Information 
     
    We, the Hanns.G care very much about our environment protection strategy and firmly 
    believe that it helps us have healthier earth via appropriate treatment and recycling of 
    industrial technology devices at the end-of-life. 
    These devices contain recyclable materials, which can be re-decomposed and re-integrated 
    into brand-new marvels. On the contrary, other material can be classified to hazardous and 
    poisoned substances. We strongly encourage you to contact the provided information to 
    recycle this product. 
     
    For more information, please visit 
    www.hannsg.com 
     
     
    3 
     
    						
    							
    User’s Manual 
     
    TABLE OF CONTENTS 
     
    SAFETY NOTICE........................................................................\
    ...................5 
    PRECAUTIONS........................................................................\
    .................5 
    SPECIAL NOTES ON LCD MONITORS...................................................6 
    BEFORE YOU OPERATE THE MONITOR....................................................7 
    FEATURES........................................................................\
    ........................7 
    CHECKING THE CONTENTS OF THE PACKAGE..................................7 
    INSTALLATION INSTRUCTIONS.............................................................8 
    POWER........................................................................\
    ..............................8 
    MAKING CONNECTIONS........................................................................\
    .9 
    ADJUSTING THE VIEWING ANGLE......................................................10 
    OPERATING INSTRUCTIONS.....................................................................11 
    GENERAL INSTRUCTIONS....................................................................11 
    FRONT PANEL CONTROL.....................................................................12 
    HOW TO ADJUST A SETTING...............................................................13 
    PLUG AND PLAY........................................................................\
    ............16 
    TECHNICAL SUPPORT (FAQ)....................................................................17 
    Q & A FOR GENERAL PROBLEMS.......................................................17 
    ERROR MESSAGE & POSSIBLE SOLUTIONS....................................18 
    APPENDIX........................................................................\
    ...........................19 
    SPECIFICATIONS........................................................................\
    ...........19 
     
    4 
     
    						
    							
    User’s Manual 
     
    SAFETY NOTICE 
     
    1. The changes or modifications not expressly approved by the party responsible for 
    compliance could void the users authority to operate the equipment. 
    2. Shielded interface cables and AC power cord, if any, must be used in order to comply 
    with the emission limits. 
    3. The manufacturer is not responsible for any radio or TV interference caused by 
    unauthorized modification to this equipment. It is the responsibilities of the user to 
    correct such interference. 
     
    WARNING: 
    To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously 
    high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to 
    qualified personnel only. 
     
    PRECAUTIONS 
    • Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry 
    tub, swimming pool or in a wet basement. 
    • Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can 
    injure a person and cause serious damage to the appliance. Use only a cart or stand 
    recommended by the manufacturer or sold with the monitor. If you mount the monitor on 
    a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit 
    instructions. 
    • Slots and openings in the back and bottom of the cabinet are provided for ventilation. To 
    ensure reliable operation of the monitor and to protect it from overheating, be sure these 
    openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or 
    similar surface. Do not place the monitor near or over a radiator or heat register. Do not 
    place the monitor in a bookcase or cabinet unless proper ventilation is provided. 
    • The monitor should be operated only from the type of power source indicated on the 
    label. If you are not sure of the type of power supplied to your home, consult your dealer 
    or local power company. 
    • Unplug the unit during a lightening storm or when it will not be used for long period of 
    time. This will protect the monitor from damage due to power surges. 
    • Do not overload power strips and extension cords. Overloading can result in fire or 
    electric shock. 
    • Never push any object into the slot on the monitor cabinet. It could short circuit parts 
    causing a fire or electric shock. Never spill liquids on the monitor. 
    • Do not attempt to service the monitor by yourself; opening or removing covers can 
    expose you to dangerous voltages and other hazards. Please refer all servicing to 
    qualified service personnel. 
    • To ensure satisfactory operation, use the monitor only with UL listed computers which 
    have appropriate configured receptacles marked between 100 - 240V AC, Mi\
    n. 5A. 
    • The wall socket shall be installed near the equipment and shall be easily accessible. 
     
     
     
     
    5 
     
    						
    							
    User’s Manual 
     
    SPECIAL NOTES ON LCD MONITORS 
     
    The following symptoms are normal with LCD monitor and do not indicate a problem. 
     
    • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn 
    off the Power Switch and then turn it on again to make sure the flicker disappears. 
    • You may find slightly uneven brightness on the screen depending on the desktop pattern 
    you use. 
    • The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 
    0.01% or less such as a missing pixel or a pixel lit all of the time. 
    • Due to the nature of the LCD screen, an afterimage of the previous screen may remain 
    after switching the image, when the same image is displayed for hours. In this case, the 
    screen is recovered slowly by changing the image or turning off the Power Switch for 
    hours. 
    • If the screen suddenly flashes erratically or the backlighting fails, please contact your 
    dealer or service center for repair. Do not attempt to repair the monitor yourself. 
     
     
     
     
     
    6 
     
    						
    							
    User’s Manual  
    BEFORE YOU OPERATE THE MONITOR 
     
    FEATURES 
     
    • 19” TFT Color LCD Monitor 
    • Crisp, Clear Display for Windows 
    • Recommended Resolutions: 1280 X 1024 @60Hz 
    • EPA ENERGY STAR®
    • Ergonomic Design 
    • Space Saving, Compact Case Design 
     
    CHECKING THE CONTENTS OF THE PACKAGE 
       
    The product package should include the following items: 
    LCD Monitor 
      
    Screen Base 
    Cables and User manual 
     
    Power Cord VGA Cable Audio Cable 
     
     
     
    User’s manual Warranty card DVI-D Cable (dual input 
    mode optional) 
    7 
     
    						
    							
    User’s Manual 
     
    INSTALLATION INSTRUCTIONS 
     
    Install   Remove 
     
    Figure.1. Installing and Removing the Base 
     
    INSTALLATION: 
     
    1. Align the monitor with the opening in the base. 
    2. Note that the longer section of the base points forward. 
    3. Snap the monitor into its base. A clear click sound will affirm that the base is connected 
    correctly. 
    4. Verify that the monitor is securely attached to the base by looking at the bottom of the 
    base and making sure that the clips are fully engaged in the base. 
     
    REMOVAL: 
     
    1. Flip over the monitor so that it us upside down. 
    2. Press the 2 clips that hold the monitor in place. 
    3. Gently press and hold the 2 clips while pulling the base from the monitor unit they are 
    unattached. 
     
    POWER 
     
    POWER SOURCE: 
     
    1. Make sure that the power cord is the correct type required in your area. 
    2. This LCD monitor has an Internal universal power supply that allows operation in either     
    100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 
    3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other 
    end to wall-outlet .  
     
    8 
     
    						
    							
    User’s Manual  
    MAKING CONNECTIONS 
     
    CONNECTING TO A PC: 
     
    Turn off your computer before performing the procedure below.  
    1. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the 
    other end to the computer’s D-Sub port. 
    2. Connect one end of the 24-pin DVI-D cable (Dual input mode optional) to the back of the 
    monitor and connect the other end to the computer’s DVI-D port.  
    3. Connect the audio cable between the monitors audio input and the PCs audio output 
    (green port). 
    4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other 
    end to Wall outlet. 
    5. Turn on your monitor and computer. 
     
     
     
     
    Figure.2. Connecting to a PC 
     
     
    9 
     
    						
    							
    User’s Manual 
     
    ADJUSTING THE VIEWING ANGLE 
     
    • For optimal viewing it is recommended to look at the full face of the monitor, then adjust 
    the monitor’s angle to your own preference. 
    • Hold the stand so you do not topple the monitor when you change the monitor’s angle. 
    • You are able to adjust the monitor’s angle from -5° to 20°. 
     
     
     
     
    Figure.3. Monitor Angle 
     
     
    NOTES: 
     
    • Do not touch the LCD screen when you change the angle. It may cause damage or 
    break the LCD screen. 
    • Be careful not to place fingers or hands near the hinges when tilting the monitor, 
    otherwise pinching can result. 
     
     
    20°
    -5°
    10 
     
    						
    All Hanns.G manuals Comments (0)

    Related Manuals for Hanns G Hx192rpb Users Manual