Hitachi 42pd6000ta Users Manual

ENGLISH 
 
 11
 
  COMPONENT NAMES (continued) 
 
  Remote control 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
• Do not use new and old batteries together. The batteries   
  could explode or leak, resulting in fires, physical injury, or   
 stains. 
• When loading batteries, observe their correct polarities as 
  marked on the product. If loade d in the wrong direction, the 
  batteries could explode or leak, resulting in fires, physical   
  injury, or...

 
 
12 
  COMPONENT NAMES (continued)  
 
  Remote control (continued) 
 
 
 
 
 
 
 
Function Buttons 

HITACHI MODEL 42PD6000TA   

ENGLISH 
 
 13
  COMPONENT NAMES (continued) 
 
  Remote control (continued) 
 
1. POWER button 
Press this button to turn the TV set on or standby. 
 
2. I/II button  Press to select sound mode: Mono  À, Stereo 
, Language A 5¾*5¿, Language B 5¾**5¿, Language A/B 5¾***5¿. 
 
3.     (MUTE) button  Press to mute the volume. Press again to restore the volume. 
 
4. RECALL button  
Press to display source input signal on the display. When t he PIP function is working, press to display audio source. 
Then...

 
 
14 
  COMPONENT NAMES (continued)  
 
  Remote control (continued) 
 
19. SORT EDIT button 
Press SORT EDIT button to enter function menu for editing, channel name, system, fine tune channel frequency, and 
delete the channel from list table. 
 
20. P. MODE button  
      Press to select Natural, Cinema and Dynamic pictur e mode. Press repeatedly to circle through the selections. 
 
21. P. SIZE button  
Press repeatedly to change image to different size. Sizes  include 4:3 Standard, Panoramic, 4:3...

ENGLISH 
 
 15
 
  COMPONENT NAMES (continued) 
 
  Remote control (continued) 
 
22. ZOOM +/- buttons 
      Zoom in on the image by pressing Zoom + button and press Zoom – button to zoom out. 
 
23. PIP SWAP button  
Press to exchange the main video signal  source with PIP video signal source. 
 
24. PIP INPUT button 
Activate PIP by pressing PIP Input button to select desired  video input. To turn off PIP by keep pressing PIP Input 
button until the PIP window disappear.  PIP source cannot be the...

 
 
16 
 
  COMPONENT NAMES (continued)  
 
  Remote control (continued) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
A. TV/TEXT button 
Press to switches between the TV mode and the Teletext mode. 
 
B. BLUE button                                                                                                                  
Press to operate the Teletext function in Teletext  pattern. (Function depends on the Teletext pattern.) 
 
C. YELLOW button  
Press to operate the Teletext function in...

ENGLISH 
 
 17
 
INSTALLATION INSTRUCTIONS 
 
  Installation 
 
• If you have purchased the model without the stand attached: 
  When installing the monitor, use the optional stand CMPAD42T. 
  The desktop stand has been used for the installation in this manual. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Read SAFETY INSTRUCTIONS (  5  to  8  ) car efully to ensure maximum safety before proceeding to 
these steps:
 
• Choose an appropriate site and install the product on a level table where the stand is...

 
 
18 
 
  INSTALLATION INSTRUCTIONS (continued)  
 
    Connecting to an Audio Visual Device 
 
(1)  Make sure that the signal of the audio visual device to be used is compatible with the specifications of this 
device. See “PRODUCT SPECIFICATIONS” concerning  the specifications of this device.  40 ~  42 
(2)  Make sure that the power switch of the PDP TV is turned off. 
(3)  Make sure that the power switch of the audio visual device is turned off. 
(4)  Use a commercially available cable and...

ENGLISH 
 
 19
 
  INSTALLATION INSTRUCTIONS (continued) 
 
    Connecting to an Audio Visual Device (continued)  
 
 
 
HDTV input sources, su ch as a digital cable box, digital satellite receiv er, or digital terrestrial receiver box, can be 
connected as desired, using the appropriate cable system. 
1. Connect the HDTV source device using the appropriate  cable pair, in the following order of preference: 
    HDMI cable or Component cable and audio cable 
2. Connect all power sources before...

 
 
20 
 
  INSTALLATION INSTRUCTIONS (continued)  
 
    Connecting to an Audio Visual Device (continued)  
 
 
 
1. Connect the DVD player using: 
    HDMI cable or Component cable and Audio cable or S-Video  cable and Audio cable or Composite cable and Audio cable. 
2. Connect all power sources before activating the PDP TV. 
3. Turn on the PDP TV. 
4. Press the button corresponding to the appropr iate signal source (HDMI, Component Video, YC
BCR/YPBPR, S-Video or Composite 
Video)...