Hitachi 42pd8800ta User Manual

49
FUNCTION (continued)
Photo Input Function (continued)
Other
 You can select the background pattern on “Background” from “Function Menu.” 
Function Menu Selection Description
Background1→2Select preferred background pattern.
1: Striped texture of gray
2: Green checked pattern
 Press 
 button whenever you want to return from full size image to index.
 
The fi le information is displayed by pressing
  button.
                     
          Thumbnail-Size Image         Full-Size Image (Still)...

50
ENGLISH
FUNCTION (continued)
Photo Input Function (continued)
CAUTION
 The picture may not be displayed on this monitor in case of copying, viewing or editing by computers, etc.
 Do not connect any apparatus other than DSC, USB card reader, and SD card/MMC to the Photo Input 
connector. It causes the malfunction.
 Do not connect a DSC and USB card reader with USB HUB. Pictures may not be displayed correctly, or it causes 
the malfunction.
 Insert only one memory even though the USB card reader has...

51
FUNCTION (continued)
Audio Switching
NICAM / Sound Multiplex(including A2)   (TV mode)
You can make optimum use of available audio by pressing
  bottom of remote control.  Audio can be switched only 
if receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when 
only mono sound is received. 
These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.
Bilingual/Dual Sound broadcast
Bilingual broadcast is the...

52
ENGLISH
FUNCTION (continued)
Power Save Mode
When AV input is selected
 You are provided the function to save power consumption when no signal is detected in AV input. Set to On in “Video 
Power Save” from Function Menu, which leads to the power save mode in AV1 /AV2 /HDMI1 /HDMI2 and the 
Standby mode in other AV input. (Please see the table below for details) Refer to 
27 about “Video Power Save”. 
When no signal is detected
When signal is input during 
On in “Video Power Save”
Condition Indicating...

53
FUNCTION (continued)
DVD Player / STB Selection
You can use this remote control to operate DVD Player and Set Top Box of other 
makers as well as this set. After pressing
 
 button, press (or hold) the required 
buttons to select the maker and type as shown below.  
Set up hint
Example: HITACHI DVD
w
1. Set up the maker.
Press
  button to indicate the DVD LED on the remote control. While the DVD 
LED is blinking (Approx. 30 Seconds), press + and 
q buttons.
2. Set up the maker type.
Release the 
q...

54
ENGLISH
TROUBLESHOOTING
Before calling service technician, check the following tables fi rst. If the problem is not be solved with the suggested procedures, contact your local 
dealer. For your safety, NEVER try to repair the product by yourself.
When Following Messages Appear on the Screen
Message Condition / Action Page
Power SaveThis indicates it is in Power Save mode. (in AV/RGB mode)
The indicating lamp lights in orange.
27, 52
No Sync. SignalThe unit cannot detect any signals from any input...

55
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms Check list Page
 No picture
The Indicating lamp → Off  Check if the Power Cord is plugged into the socket fi rmly.
  Check if the Main Power is ON.
17, 18
 No picture
The Indicating lamp → Orange
It means that the unit is in “Power Save 
mode”.   Check if all the cables of the external equipments are connected 
correctly and fi rmly.
  Check if the power of the external equipments is ON.
  Check if the TV/AV mode has been selected...

56
ENGLISH
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms Check list
Page
  Cannot display the image from “Photo 
Input function”.  Check the connecting equipments and image format.
(Please refer to “Photo Input function”.)
45, 49, 
50
  The image on the screen is moving in 
an oblique direction.
(PC input mode only)
  Adjust “Horizontal Clock” and “Clock Phase”.25
  The coarse horizontal stripes could be 
seen in full-display mode.
(PC input mode only)
  Adjust “Horizontal...

57
PRODUCT SPECIFICATIONS
SPECIFICATION
PanelDisplay dimensionsApprox. 42 inches 
(922 (H) x 522 (V) mm, diagonal 1059mm)Approx. 55 inches 
(1230 (H) x 692 (V) mm, diagonal 1412mm)
Resolution 1024(H) x 1024 (V) pixels 1366 (H) x 768 (V) pixels
Net dimensionsincluding Optional Stand:
1134(W)x728(H)x350(D) mm
excluding Optional Stand:
1134(W)x648(H)x98(D) mmincluding Optional Stand:
1510(W)x933(H)x450(D) mm
excluding Optional Stand:
1510(W)x840(H)x105(D) mm
Net weightincluding Optional Stand: 43.0kg...

58
ENGLISH
PRODUCT SPECIFICATIONS (continued)
Signal Input
RGB terminal (D-sub 15-pin connector)
Pin Input signal
1R
2 G or sync on green
3B
4 No connection
5 No connection
6 R.GND
7 G.GND
8 B.GND
9 No connection
10 GND
11 No connection
12 [SDA]
13 H. sync or H/V composite sync
14 V.sync. [V.CLK]
15 [SCL]
S-input connector pin specifi cations
Pin Input signal
1Y
2 Y-GND
3C
4 C-GND
Frame GND
Photo-input connector pin specifi cations
Pin Input signal
15V
2DM
3DP
4 GND
HDMI connector pin specifi cations
Pin...