Hitachi 42pd8a10 Instructions For Use

GBD
F I
Instructions for use
Bedienungsanleitung
Notice d'utilisation
Istruzioni per l'uso
42PD8A10 42PD8
600
 

-1-
Contents
Remote Control Buttons ......................... 2
PLASMA TV ............................................. 3
Preparation ............................................. 5Features ............................................... 5
Panel Features ..................................... 5
Safety Precautions ................................. 5
Before Switching On Your TV ................. 8
Power Connection ................................ 8
Connections To The Aerial Input Socket 8
How To Connect...

-2-
Remote Control Buttons
= Stand by On/Offf
= Picture Mode
= Equalizer Sound Mode
= Surround Mode
= Input Source
= Program Information
= Sound Mode
=SleepTimer
RED /= PAT (Picture and Text)
GREEN /= Subtitle page in TV mode
YELLOW /= Select active window
in PIP mode
BLUE = Only used in Teletext mode
= Menu On/Off
=Gobacktopreviousmenu
aP+ = Programme Up / Cursor Up
_= Volume Down / Cursor Leftt
OK = Enter
`= Volume Up / Cursor Right
bP- = Programme Down / Cursor Down
= Mute On/Off
= Freeze On/Off
=...

-3-
PLASMA TV
FRONT VIEW
REAR VIEW
ON/OFFSWITCHLEDSPEAKERSPEAKER
 

-4-
On/Off switch
Volume Up, Volume Down buttons
Prog. Up, Prog. Down buttons
MENU button
TV/AV button
Power cord input
S-VHS Input
Video Input
Audio Inputs
Headphone
AudioLineOuts
Subwoofer Out
Scart 3 (EXT-3)
PC Audio Input
Aerial
Scart 2 (EXT-2)
Scart 1 (EXT-1)
HDMI Input (EXT-6)
Component Audio Inputss
Component Video (YPbPr) Inputs
VGA Input
EXT-5
EXT-4
 

-5-
Preparation
For ventilation, leave a space of at least 10
cm free all around the set. To prevent any
fault and unsafe situations, please do not
place any objects on top of the set.
Use this apparatus in tropical and/or moder-
ate climates.
Features
• Remote controlled colour television.
• 100 programmes from VHF, UHF bands orcable channels can be preset.
• It can tune cable channels.
• Controlling the TV is very easy by its menu driven system.
• It has 3 Scart sockets for external devices (such as...

-6-
Observe the manufacturers instructions when
connecting extension leads to the TV. Check
the fuse rating on the new plug, this should be
fitted with a 5 Amp fuse which conforms to ei-
ther ASTA or BSI (BS1 362) approvals, these
are easily identifiable by either the
or
symbols. If you are in any doubt about the in-
stallation of an extension lead, please consult
a competent electrician.
DON’Ts
DON’Tcontinue to operate the equipment if
you are in any doubt about it working normally,
or if it is damaged...

-7-
“The Plasma TV is a very high techology
product giving you fine picture details. Occa-
sionally, a few non-active pixels may remain
still on the screen. Long-time unmoving still
pictures may cause permanent shade effect
on the screen and even the picture has been
changed, its influence lasts as ghost pic-
ture. This ghost effect may disturb the user
even though it will diminish in the course of
time. To prevent this, don't leave still pictures
for example teletext pages or frozen pictures
on the...

-8-
Before Switching On Your TV
Power Connection
IMPORTANT:The TV set is designed to op-
erate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the
ambient room temperature before you con-
nect the set to the mains.
Connections To The Aerial Input
Socket
VHF/UHF
75:
REAR OF THE TV
CABLE TV
• Connect the aerial or cable TV plug to theAerial input socket located at the rear of the
TV and connect the cable plug coming out
from the TV out socket located on the de-
vices (VCR, DVB etc.) to...

-9-
Initial Settings
Initial APS (Automatic Programming
System)
The following menu will be displayed on the
screen when you turn your TV on for the first
time. APS, searches and sorts all channels
and stores them automatically on your TV,
according to the transmission of
programme systems in your area.
AUTO PROGRAM
PLEASE CHECK ANTENNA CABLE
Language
EnglishCountryUK
AUTO. PROGRAMMING SYSTEM
OKCancel
First of all choose LanguageandCountry by
using
a/band_/`buttons. This will af-
fect the sort process in...