Home > Hitachi > Projector > Hitachi Cp X3010 Projector Technical Manual

Hitachi Cp X3010 Projector Technical Manual

Here you can view all the pages of manual Hitachi Cp X3010 Projector Technical Manual. The Hitachi manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 1

1
Projector
CP-X2010/CP-X2510/CP-X3010
User's Manual (detailed)
Operating Guide – Technical
Resolution (H x V)H. frequency (kHz) V. frequency (Hz) RatingSignal mode
720 x 400 37.9
85.0VESA TEXT
640 x 480 31.559.9VESAVGA (60Hz)
640 x 480 37.972.8VESAVGA (72Hz)
640 x 480 37.575.0VESAVGA (75Hz)
640 x 480 43.385.0VESAVGA (85Hz)
800 x 600 35.256.3VESASVGA (56Hz)
800 x 600 37.960.3VESASVGA (60Hz)
800 x 600 48.172.2VESASVGA (72Hz)
800 x 600 46.975.0VESASVGA (75Hz)
800 x 600 53.785.1VESASVGA (85Hz)
832 x 624...

Page 2

2
Initial set signals
Initial set signals
The  following  signals  are  used  for  the  initial  settings.  The  signal  timing  of  some 
PC  models  may  be  different.  In  such  case,  adjust  the  items  V  POSITION  and  H 
POSITION in IMAGE menu. 
 
computer Signal Horizontal signal timing (μs)
computer 
Signal Vertical signal timing (lines)
(A) (B)(C) (D) (a)(b) (c)(d)
TEXT 2.03.020.3 1.0 TEXT 342400 1
VGA (60Hz) 3.81.925.4 0.6 VGA (60Hz) 233480 10
VGA (72Hz) 1.34.120.3 0.8 VGA (72Hz) 328480 9...

Page 3

3
ACOMPUTER IN1, BCOMPUTER IN2, CMONITOR OUT
D-sub 15pin mini shrink jack
• Video signal:  RGB separate, Analog, 0.7Vp-p,   
75Ω terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level
Pin Signal Pin Signal
1 Video Red 9
(No connection)
2 Video Green 10Ground
3 Video Blue 11(No connection)
4 (No connection) 12
A
: SDA (DDC data) / B, C : (No connection)
5 Ground 13H. sync / Composite sync.
6 Ground Red 14V. sync.
7 Ground Green 15
A
: SCL (DDC clock) /...

Page 4

4
GS-VIDEO
Mini DIN 4pin jack
PinSignal
1 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator
Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator
2 Brightness signal, 1.0Vp-p, 75Ω terminator
3 Ground
4 Ground
Connection to the ports (continued)
4
3
21
HVIDEO
RCA jack
• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60
• 1.0±0.1Vp-p, 75Ω terminator
COMPONENT DY, ECb/Pb FCr/Pr
RCA jack x3
• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60
Port Signal
Y Component video Y, 1.0±0.1Vp-p,...

Page 5

5
Connection to the ports (continued)
IAUDIO IN1, JAUDIO IN2
Ø3.5 stereo mini jack
• 200 mVrms 47kΩ terminator
AUDIO IN3 KR, LL
RCA jack x2
• 200 mVrms 47kΩ terminator
AUDIO OUT MR, NL
RCA jack x2
• 200 mVrms 1kΩ output impedance
To input SCART RGB signal;
  ex.:
To input SCART RGB signal to the projector, use a SCART to RCA cable. 
Connect the plugs refer to above ex.. For more reference, please consult your dealer.
SCART connector
(jack)
SCART cable (plug)
:­:À:»:¼:Æ
:©
:™
:ž
:˜:Ì:»:À:Æ:w :£...

Page 6

6
Connection to the ports (continued)
OUSB
USB B type jack
PinSignal
1 +5V
2 - Data
3 + Data
4 Ground43
12
PCONTROL
D-sub 9pin plug
• About the details of RS-232C communication,   
please refer to the following page.
Pin Signal PinSignal PinSignal
1 (No connection) 4(No connection) 7RTS
2 RD 5Ground 8CTS
3 TD 6(No connection) 9(No connection)
PO
9 5
4
3
2
1
6
7
8 

Page 7

7
RS-232C Communication
RS-232C Communication
Connecting the cable
1. Turn off the projector and the computer. 
2. Connect the CONTROL port of the projector with a RS-232C port of 
the computer by a RS-232C cable (cross). Use the cable that fulfills the 
specification shown in the previous page.
3. Turn the computer on, and after the computer has started up turn the 
projector on.
Communications setting
19200bps, 8N1
1. Protocol
Consist of header (7 bytes) + command data (6 bytes)
2. Header
BE + EF + 03...

Page 8

8
RS-232C Communication (continued)
Requesting projector status (Get command)
(1) Send the following request code from the PC to the projector.
 Header + Command data (‘02H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) 
(2) The projector returns the response code  ‘1DH’ + data (2 bytes) to the PC.
Changing the projector settings (Set command)
(1) Send the following setting code from the PC to the projector.
    Header + Command data (‘01H’ + ‘00H’ + type (2 bytes) + setting code (2 bytes)) 
(2) The...

Page 9

9
Names Operation Type Header Command Data
CRC Action TypeSetting Code
Power SetTurn off BE  EF0306  00 2A  D3 01  0000  60 00  00
Turn on BE  EF0306  00 BA  D2 01  0000  60 01  00
Get BE  EF0306  00 19  D3 02  0000  60 00  00
[Example return]
  00  00  01  00 02  00 
  [Off]  [On] [Cool down]
Input Source SetCOMPUTER1 BE  EF0306  00 FE  D2 01  0000  20 00  00
COMPUTER2 BE  EF0306  00 3E  D0 01  0000  20 04  00
COMPONENT BE  EF0306  00 AE  D1 01  0000  20 05  00
S-VIDEO BE  EF0306  00 9E  D3 01  0000  20...

Page 10

10
Names Operation Type Header Command Data
CRC Action TypeSetting Code
GAMMA Set1 DEFAULT BE  EF0306  00 07  E9 01  00A1  30 20  00
1 CUSTOM BE  EF0306  00 07  FD 01  00A1  30 10  00
2 DEFAULT BE  EF0306  00 97  E8 01  00A1  30 21  00
2 CUSTOM BE  EF0306  00 97  FC 01  00A1  30 11  00
3 DEFAULT BE  EF0306  00 67  E8 01  00A1  30 22  00
3 CUSTOM BE  EF0306  00 67  FC 01  00A1  30 12  00
4 DEFAULT BE  EF0306  00 F7  E9 01  00A1  30 23  00
4 CUSTOM BE  EF0306  00 F7  FD 01  00A1  30 13  00
5 DEFAULT BE...
Start reading Hitachi Cp X3010 Projector Technical Manual

Related Manuals for Hitachi Cp X3010 Projector Technical Manual

All Hitachi manuals