Hitachi F 2500 Manual

INSTRUCTION MANUAL   
HITACHI FLUORESCENCE SPECTROPHOTOMETER   
FL SOLUTIONS PROGRAM   
(OPERATION MANUAL)   
 
 
 
 
 
 
 
Hitachi High-Technologies Corporation 
3rd Edition, November 2001 
1st Edition, 2001 
Copyright  Hitachi High-Technologies Corporation 2001.    All rights reserved.    Printed in Japan.  Part No. 251-9067-2 TF-TF (GT-LT)  

 - 1 -
PREFACE  
 
Thank you very much for purchasing the Hitachi   
High-Technologies Corporation fluorescence spectrophotometer.     
 
This instrument is intended for use by persons having a 
basic knowledge of chemical analysis.    Remember that 
improper use of analytical instruments, chemicals or 
samples would result not only in wrong analytical data but 
also in consequences adverse to safety.   
 
Carefully read this instruction manual before attempting 
operation.    For proper use of the...

 - 2 - 

 - 3 -
IMPORTANT  
 
Precautions on Electromagnetic Wave Interference   
 
1.  Possible Electromagnetic Wave Interference Caused by 
The Instrument   
 
When the instrument is used in a residential area or an 
adjacent area thereto, it may cause interference to radio 
and television reception.   
To prevent this, use the specified system connection cables 
in strict accordance with the instruction manual.     
The instrument is designed to minimize possible 
electromagnetic wave interference caused by it...

 - 4 -
  Reorient the instrument.   
  Increase separation between the instrument and 
possible sources of electromagnetic interference.   
  Increase separation between the power cable of the 
instrument and possible sources of electromagnetic 
interference.  
  Connect the instrument to an outlet on a circuit different 
from that to which possible sources of electromagnetic 
interference are connected.   
  Check that any other device connected with the 
instrument is not affected by...

 - 5 -
WARRANTY ON PRODUCT   
 
The Hitachi fluorescence spectrophotometer is warranted to be 
free from defects in material or workmanship under normal use 
within the product specifications indicated in this manual and 
under conditions given below.    This warranty is void if the 
instrument is not used in accordance with the instruction manual.   
 
(1)  Scope of Warranty   
(a)  Any parts which prove to be defective in design or 
workmanship during the warranty period will be 
repaired, adjusted or...

 - 6 -
(e)  Failure due to use of hardware, software or spare parts 
other than specified by us.   
(f)  Failure due to improper handling or maintenance by 
the user.   
(g)  Failure due to maintenance or repair by a service 
agent not approved or authorized by us.   
(h)  After disposal of the instrument, or after its resale 
without our approval.   
(i)  Failure due to relocation or transport after initial 
installation.  
(j)  Failure due to disassembly, modification or relocation 
not approved by us....

 - 7 -
DISCLAIMER OF WARRANTY   
 
(1)  WE MAKE NO WARRANTIES, EITHER EXPRESS OR 
IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING 
WITHOUT LIMITATION THEREOF, WARRANTIES AS TO 
MARKETABILITY, MERCHANTABILITY, FOR A 
PARTICULAR PURPOSE OR USE, OR AGAINST 
INFRINGEMENT OF ANY PATENT.    IN NO EVENT 
SHALL WE BE LIABLE FOR ANY DIRECT, INCIDENTAL 
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR 
LOSSES OR EXPENSES RESULTING FROM ANY 
DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.   
 
(2)  NO ORAL OR WRITTEN...

 - 8 -
OTHER PRECAUTIONS   
 
Handling of Chemicals and Samples   
 
(1)  The user is responsible for following relevant legal 
standards and regulations in the handling, storage and 
discarding of chemicals and samples used in analytical 
operations of the instrument.   
 
(2)  Reagents, standard solutions and accuracy-control 
samples shall be handled, stored and discarded as 
instructed by the respective suppliers.   
 
Notice on This Instruction Manual   
 
(1)  The information contained in this...

 
SAFETY - 1 
     SAFETY SUMMARY    
 
 
 
 
PRECAUTIONS ON SAFETY 
 
Before using the Hitachi fluorescence spectrophotometer, be 
sure to read the following safety instructions carefully. 
 
 
     General Safety Guidelines 
 
  Follow all the operating procedures provided in this manual. 
  Installation and maintenance of this instrument shall be 
carried out by service personnel qualified therefore. 
  Be sure to observe the warnings indicated on the product and 
in the instruction manual....