Hitachi LED LCD HDTV W806 User Manual

							1
2
4
6
7
9
11
13
14
19
20
23
243
8
10
12
15
18
21
22
25
26 5
28
16
17
27
1.  Slide open the battery cover on the back of the remote control.  
2.  Install two AAA size(1.5V) batteries. Match the “+”  and  “-” 
signs on the batteries to the signs on the  battery compartment.
3. Close the battery cover.
123



11
16. MUTE Button – To turn off the sound, press this button 
once. The LCD TV will be silenced and the mute icon will 
appear on the screen. The muting feature can be released by 
pressing the MUTE button again or by pressing either of the 
VOL(VOLUME) $$button.
17. Direct Input Key Buttons –  Press to go Vudu/Netflix/DMP
18. Transport Keys – Use them with DMP/Vudu/ Netflix/HDMI 
CEC features.
19. S.MODE – Press to select Sound mode.
20. P.MODE – Press to select Picture mode.
21. C.C.Button – Used to turn on/off the Closed Captions.
22. ASPECT Button –  Press to change the picture size.
23. MTS/SAP Button –  Press to change the audio language.
24. 3D Button – Press to open the 3D Menu.
25. SLEEP Button –  To set the LCD TV to turn off after a 
preset amount of time, use the SLEEP button on the remote 
control.
26. TIME Button –  Press to display the time.
27.  – Button –  This button is the “-”button, used when 
selecting digital channels.
28.       Button –  Press to display the application menu.
1. POWER Button –  Press to turn the LCD TV’s power on/off. 
2. Direct Input Key Buttons –  Press to go to the 
AV/COMP/RGB/HDMI. 
3. INPUT Button –  Press to change the TV’s input 
4. Direct Channel Selection Button (0-9) –  Allow direct 
access to any channel of the LCD TV. 
5. LAST CH Button –  Pressing this button allows you to go 
back to the previous channel selected. Press this button again 
to return to the channel you were watching. 
6. Color keys – Used for network features like VUDU.
7. MENU Button – Press to display the On-Screen menu.
8. EXIT Button –  Press to exit the On-Screen menu.
9. CURSOR                Buttons  – Use to navigate and select 
menu functions of the LCD TV.
10. ENTER Button –  Press to enter or select functions for the 
On-Screen menu.
11. RETURN Button – Return to the previous menu.
12. INFO Button –  When you press this button, the current 
information will the displayed on the screen.
13. FAV CH Button – Press to display favorite channels.
14. VOL(VOLUME) $$$$$$$Buttons – Press the$$$button to 
increase, or the    button to decrease the sound level.
15. CH(CHANNEL) $$$$$$$Buttons – Press to change the 
channels of the TV.
ENTER 
						

							12
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions b\
elow that correspond to your antenna system. If you 
are using a Cable TV service, see Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable)
Cable TV connections
For basic Cable TV service not requiring a Converter/Descrambler box, connect the 
75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV.
For subscribers to scrambled Cable TV serviceIf you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connec\
t the incoming 75 ohm Coaxial 
Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack of the Conve\
rter/Descrambler 
box to the Antenna Jack on the TV. Follow the connections shown below. Set the TV to the output channel of the Converter/
Descrambler box (usually channel 3 or 4) and use the Converter/Descram\
bler box to select channels.
For subscribers to unscrambled Cable TV service with scrambled premium c\
hannelsIf you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels \
require the use of a 
Converter/Descrambler box, you may wish to use a signal Splitter and an \
A/B Switch box (available from the Cable TV company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any 
nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the Converter/Descrambler box 
(usually channel 3 or 4) and use the Converter/Descrambler box to tune\
 scrambled channels. This TV has an extended tuning range and can tune free access cable chan\
nels without using a Cable TV Converter box. Most
cable companies offer “premium pay channels” where the signal is s\
crambled. Descrambling these signals for normal 
viewing requires the use of a descrambler device which is generally prov\
ided by the Cable TV company.
For subscribers to basic Cable TV service
Incoming 75 ohm Cable TV Cable 75 ohm Cable to TVAntenna
JackConverter/
Descrambler
Splitter B
A
Incoming
75 ohm
Cable TV 
Cable
A/B Switch75 ohm Cable to TV
Converter/
Descrambler
Antenna Jack
75 ohm
Coaxial
Cable
AntennaJack
75 ohm
Coaxial Cable Antenna
Jack 
						

							Starting setup
will assist you to specify the Air/Cable setting and program 
your channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system 
connection is made.
1To turn on the TV, pressPOWER (POWER indicator LED on the 
confirm. This product qualifies for ENERGY STAR in Home mode 
on remote control
default  setting.
Retail mode is not an energy saving mode.
front of the unit changes to white. It may take approx. 10 seconds 
for a picture to appear on screen.). The 
Setup Wizard function 
begins. 
2Press ·  or &ý to select “Source”, then press  or  to select 
“Cable” or “Air”.
3Press ·  or &ý to select “Scan”, then press  or ENTER. 
4
s 
NOTE
s
 
TV operation
TO SELECT DIGITAL CHANNELS
– button followed by 
the remaining number.
Example, to select channel 15-1, press 1, 5, –, 1, then press 
ENTER.
s  If a channel is selected with only audio content, “Audio  only” will be displayed on the screen.
s  If a channel is selected with a weak digital signal, “Searching  for Signal....”  will be displayed on the screen. 
s  The same program may be available on either an analog  channel or a digital channel. You may choose to watch 
either format.
s  If a channel is selected to which you have not subscribed, 
“Scrambled Video” will be displayed on the screen.
VHF/UHF/CABLE CHANNELS
Air Cable
VHF
2-13 VHF
2-13
UHF
14-69
NOTES
s  If a channel with no broadcast is selected, the sound will  automatically be muted.
s  It may take a few seconds for a digital channel picture to  appear on screen after being selected.
To select the video input source
· &ý
CH /Press and release CH /. The channel automatically stops at 
the next channel set into memory.
For proper operation, before selecting channels, they should be 
set into the memory. Refer to the Channels Menu on page 14.
Please select your tuner mode:
  Cable
Move  Select  Exit
Return
Air
If you press  EXIT in the process of “Setup Wizard”, the Setup 
Wizard stops and changes to the normal screen. When you 
make a menu selection, your changes occur 
immediately. You 
do not have to press EXIT to see your changes. Depending on the reception condition, it may take up to 25 
minutes or more to complete memorizing digital cable 
channels. Please allow the process to complete without 
interruption.
“Setup Wizard” will begin. After the Setup Wizard is   
completed, the TV channel appears on the screen.
CATV
Digital Terrestrial Broadcast(8VSB):2-69
Digital cable(64/256 QAM):1-1351-125 
Air
INPUT
Air/Cable
Component
RGB
USB AV HDMI 1
HDMI 2
HDMI 3
HDMI 4
Select
Exit Move
13
·
&ý··
To view a signal from another device connected to 
your  LCD TV, such as a VCR player, press  INPUT, 
then  press     or      ,then press  ENTER. You can 
select Air/Cable, HDMI1, HDMI2, HDMI3, HDMI4, 
Component, AV, RGB or USB depending on which 
input jacks you used to connect your devices.  
1To turn on the TV, press 
POWER.
(POWER indicator LED on the front of the unit changes to white. 
It may take approx. 10 seconds for a picture to appear on 
screen.)
2Adjust the volume level by pressing  VOL  or  . The 
volume level will be indicated on the screen by a volume bar. 
3Set the Source option to the appropriate position.
4Press the Direct Channel Selection (0-9, –)  buttons to 
select the channel.
(If you press only the channel number, channel selection will 
be delayed for a few seconds.)
TO SELECT ANALOG CHANNELS
1-9:  Press 1-9 as needed. Example, to select channel  2, press 2, then press  ENTER.
10-99:  Press the 2 digits in order. Example, to select  channel 12, press 1 , 2, then press ENTER.
100-135:  Press the 3 digits in order. Example, to select  channel 120, press  1, 2, 0, then press ENTER.
Move·
&ýSelect·
Retail mode is intended for in-store display and resets video
settings at Power On.
·
&ý 
						

							SetMoveReturn
Select Exit
MoveSelect Exit
Move
Lock Setting                           On
Reset
3D 10
Return
Auto Scan
Status: Scanning...       Cable
Analog Channels: 7
Digital Channels: 0 16%
MENU MENU
EXIT EXIT EXIT
EXIT
Digital Channels.Digital Channels
Analog Channels.Analog Channels Auto Movie, Noise Reduction, MPEG NR, Dynamic Gamma,   
Backlight,  Aspect Ratio, Color Temperature, White Balance, 
Blue Only Mode , and Overscan. 
Audio Language
Audio Language /Standard/Movie/Pro-Day/Pro-night/Game/Custom.
When 3D video is watched under the fluorescent lamp 
(50~60
  Hz) or tri-band fluorescent tube, there may be 
slight flicker, so please adjust the illumination downward 
or switch off the light.
Certain  functions,  such  as  change aspect ratio,  are not  
available when watching 3D movies and  TV shows.
Other brands of 3D glasses may not be supported.
Sit upright and facing the TV when watching 3D movies and 
TV shows.
This TV supports automatic identification of common 
3D formats when connected  to HDMI V1.4 compatible 
sources. Other 3D sources require manual setup.
Audio Language
NOTES
Set to the "warmness" or "coolness" of the 
white areaa for picture.
Before using 3D function
14
·
&ý··
&ý
·
&ý
ENTER ENTER
ENTER
ENTER 
						

							3D WARNING!  
1. Some viewers may experience various types of discomfort during or 
after viewing 3D visual images, including symptoms like dizziness, 
disorientation, eye strain/fatigue, blurry vision, headaches and/or 
nausea.  If a viewer notices any of these or any other symptoms of 
discomfort while using the TV to view 3D visual images, the affected 
viewer should immediately stop watching the TV until such symptoms 
have disappeared for at least 30 minutes.  If any such symptoms are 
particularly severe or persist for hours or days after using the TV to v\
iew 
3D visual images, the affected viewer should consult a qualified 
physician.       
2. It is strongly recommended that individuals with epilepsy, people wit\
h 
any history (or family history) of seizures, individuals with heart di\
sease, 
pregnant women, and anyone who becomes nauseated easily should 
refrain from using the TV to view 3D visual images unless they have 
first consulted a qualified physician.  
3. Children’s and teenagers’ use of the TV to view 3D visual image\
s 
should be carefully supervised.  Because the visual development of 
children 6 years and younger may be incomplete and could be 
adversely affected by exposure to 3D visual images, it is not 
recommended that they use the TV to view 3D visual images unless 
their parent or guardian has first consulted a qualified physician.  
4. Using the TV to view 3D visual images for extended periods of time 
is not recommended, even if none of the above symptoms have been 
experienced, and all viewers should take regular breaks from such 
viewing.
15
Return
Move
Auto Movie                         Auto
MPEG NR                           High
Dynamic Gamma                Dynamic1
Backlight                                                   100
Aspect Ratio                        16
9
Color Temperature               Standard
White Balance
Blue Only Mode                    Off
When 3D signal format is Frame Packing, the image will be displayed 
according to the resolution of the incoming signal.  
For example: when the input signal is 1280×720, a 720p image will be \
displayed. A 1920×1080 input signal will be displayed in 1080p.   
When 3D signal format is Side-by-Side, Top-and-Bottom, the image is 
displayed full screen in half resolution (960× 1080 or 1920×540 
respectively). 
3D Mode: Format may be set to: Off, 2D-to-3D, Side-by-Side or 
Top-and-Bottom. (3D image is not displayed in Game mode.)
L-R Switch: Flips the left and right frames in Side-by-Side format.
Depth of Field:  Adjusts the range of distance (focus) that appears 
acceptably sharp in a 3D image. 
3D-to-2D: Disables automatic identification of 3D format during playback; 
forces 2D playback using only the Left or Right frame. 3D: Enables playback of 3D movies and TV shows (requires compatible 
3D glasses). 
Noise Reduction: The Noise Reduction function automatically 
reduces conspicuous noise in the picture without degrading picture 
quality. Set Noise Reduction to OFF if you see individual blocks in the \
picture.   
MPEG NR: The MPEG NR (Noise Reduction) function automatically 
reduces block noise in the picture without degrading picture quality.  
Aspect  Ratio : Use the arrow button to choose the screen aspect ration \
from 16:9, 4:3, Zoom, Cinema, Dot-to-Dot. Dynamic Gamma: The Dynamic Gamma feature allows you to set 
among three settings (Off, Dynamic 1, and Dynamic 2) to produce 
greater picture detail in dark or bright scene area. 
As the theatrical movies are shot on film at 24 frames of still pictures\
 per 
second, instead of 30 frames or 60 fields like video. When the film is 
transferred to video for television viewing, the disparity between the t\
wo 
frame rates must be reconciled. This involves a process known as 3:2 
pull down.
When the Auto Movie is set to Auto, your Hitachi LCD TV will activate 
the circuitry for this special feature to improve video performance when\
 
watching interlaced format film based sources. Set to Off will deactivat\
e 
this feature.  
·
&ýColor Temperature: Set to Warm for cooler color with more 
blue, set to Cool for a more natural color or set to Standard for 
accurate color.
Backlight: Adjust to increase or decrease the brightness of 
backlight.
Auto Movie: This feature sets the 3:2 pull down detection feature to 
Auto or Off.  
						

							CONEQ                                Wall Mount
Bass
Treble
50
50
Reset
Move
MENU
Lock Setting: Select on to lock your favorite settings.
This function is available only for Pro-Day and Pro-Night modes.
White Balance: Use this function to adjust the dark end (Cut off)  
and bright end (Drive) of the White background.
Blue Only Mode: This function removes the red and green 
signal from the video signal and displays the blue signal only. 
This lets you accurately adjust the color and tint settings.
EXIT
EXIT
Mode
Bass: This function controls the low frequency audio to the 
speakers. 
Treble: This function controls the high frequency audio to the 
speakers.  
CONEQ: Delivers clear crisp sound and high fidelity music 
playback. Use the CURSOR PAD to select the preferred setting. 
Table Top: Use this setting for improved sound quality with table  top stands. 
Wall Mount- Select this setting for improved sound quality when 
wall mounting. 
Hearing Aid- This special mode is for users that want to maintain 
clear sound after removing their conventional hearing aid. Note 
that this feature emphasizes higher frequencies. Select from Standard, Movie, News or Custom 
sound modes.
Select Return
Menu Settings
HDMI CEC
RGB PC Standby                        On
Power LED                          On
Home/Retail                     Home
Closed Captions
MENU
EXITEXIT
Demo mode: Turn the demo mode On or Off. 
Menu Settings:  duration
16
·
&ý
Overscan: When you select on, the border of the image extends 
past the video signal isn't seen.
Return
Move
Select Return
Move
Time Zone
Daylight Savings             on
Time
Sleep Timer                     off
Day/Night Timer
Day/Night Timer : Select this feature to activate and set your 
TV’s Day/Night picture mode Timers. There are three available 
Timers for your convenience. 
Select Return
Move·
&ýMove
·
&ý
·
&ý
ENTER
ENTERENTER
ENTER 
						

							HDMI CEC: Set to On and this feature will enable the 
HDMI-CEC signal bus to allow your Hitachi LCD TV to 
discover and communicate automatically with other compatible 
HDMI-interfaced Audio/Video device. The CEC signal bus 
makes global controls possible, based on “plug & play” 
automation, to minimize the number of IR remotes and 
key-presses required for basic operation of your AV device. 
Select Off to disable this option.  
Power LED: Select this feature to turn Off or On the Power 
LED indicator on the front panel on your TV.  
RGB
Home/Retail: You can change the initial setting to either Home 
or Retail mode quickly through this menu option, without 
running the TV Setup Wizard again. 
Retail mode is intended for showroom use only. Any menu  or control changes in this mode will not be saved when 
the TV is turned off.
A TV feature introduction will be popped up at the bottom of the 
screen.  
Return
Password          
7
8
9
10
Set Return
Move
17
Return
Move
Caption Control,
four
On/Off/With Mute.
Return
Move
Caption Style                 As Broadcaster
Font Size                              LargeFont Style                             Style1Font Color                            WhiteFont Opacity                        SolidBackground Color               BlackBackground Opacity           Solid
Window Color                      BlackWindow Opacity           Transparent
by
·
&ý
&ý ·
Channel Block
Rating
Input Block
Change Password
Factory Reset
·
&ý
Set Return
Move·
&ý
ENTER
ENTER
EXIT
EXIT
Reset AV & Setup - returns TV to factory default settings.
Version Info -
 
You can adjust:
H.Position - Move the image right or left.
V.Position - Move the image up or down.
Phase - Adjust the focus of stable images.
Clock - Adjust the sample frequency.
Auto Adjust - Detects input signal clock, phase and position and 
adjusts TV display accordingly.  
						

							Return
Move
Rating Enable                 off
U.S. TV Rating
U.S. Movie Rating
Canadian Ratings(Eng)
Canadian Ratings(Frn)
Region 5
Block Unrated TV            off
HDMI3
HDMI4
7
8
Set Return
Move
Air/Cable
AV
Region 5: I
Block Unrated TV: U.S.Movie Rating: Follow Step B
18
·
&ý
·
&ý
ENTER 
						

							19 
						

							20