Hitachi Projector CP-BW301Wn User Manual
Here you can view all the pages of manual Hitachi Projector CP-BW301Wn User Manual. The Hitachi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
21 Power on/off ►A strong light is emitted when the projector’s power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector’s openings, since the projection ray may cause a trouble on your eyes. ►Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot. ►Remove the power cord for complete separation. The power outlet should be close to the projector and easily accessible . WARNING 1.Press the...
Page 22
22 CALIBRATION ASPECTACCENTUALIZERHDCR AV MUTE POSITION ESCMENU RESET IWB AUTO PAGE DOWN ON OFF FREEZE UP1 2 ENTER D-ZOOM-+ ＋ ー VOLUMEMAGNIFYMYBUTTON INPUT KEYSTONETEMPLATE Operating Operating 1. Adjusting the volume Use the VOLUME +/VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after about ten seconds. ● When is selected for current picture input port, the volume...
Page 23
23 Operating 1.Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting an aspect ratio ● ASPECT button does not work when no proper signal is inputted. ● NORMAL mode keeps the original aspect ratio setting. ● The on-screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT, D-ZOOM and KEYSTONE. Changing the values of ASPECT, D-ZOOM and...
Page 24
24 Operating Adjusting the zoom and focus Adjusting the projector's elevator The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments. Spacer Press the D-ZOOM + or D-ZOOM - button on the remote control to display D-ZOOM...
Page 25
25 Operating 1.Press AUTO button on the remote control. Pressing this button performs the following. Using the automatic adjustment feature For a computer signal The vertical position, the horizontal position and the horizontal phase will be automatically adjusted. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting. For a video signal The video...
Page 26
26 Operating 1.Press TEMPLATE button on the remote control. Each time you press the button, the projector switches the mode for TEMPLATE in turn. Using the TEMPLATE feature ● TEMPLATE button does not work when no proper signal is inputted.TEST PATTERN DOT-LINE1 DOT-LINE2 DOT-LINE3 MAP2 MAP1 CIRCLE2 CIRCLE1 DOT-LINE4 TEMPLATE button CALIBRATION ASPECTACCENTUALIZERHDCR AV MUTE POSITIONESC MENU RESET IWB AUTO PAGE DOWN ON OFF FREEZE UP1 2 ENTER D-ZOOM- + ＋ ー VOLUMEMAGNIFYMYBUTTON...
Page 27
27 CALIBRATION ASPECTACCENTUALIZERHDCR AV MUTE POSITIONESC MENU RESET IWB AUTO PAGE DOWN ON OFF FREEZE UP 1 2 ENTER D-ZOOM-+ ＋ ー VOLUMEMAGNIFYMYBUTTON INPUT KEYSTONETEMPLATE 1.Press the POSITION button on the remote control while no menu is on screen, to display the D-SHIFT (44) dialog on screen. Adjusting the position 2.Use the ▲, ▼, ◄ and ► buttons to adjust the picture position. Press the POSITION button again to finish this operation. ● This is a function to shift the position of the shrunken...
Page 28
28 CALIBRATION ASPECTACCENTUALIZERHDCR AV MUTE POSITIONESC MENU RESET IWB AUTO PAGE DOWN ON OFF FREEZE UP1 2 ENTER D-ZOOM- + ＋ ー VOLUMEMAGNIFYMYBUTTON INPUT KEYSTONETEMPLATE Operating 1. Using the magnify feature 2. 3. 4. Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on, the picture will be zoomed by 1.5 times. On the dialog,...
Page 29
29 Operating 1.Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen (however, the indication will not appear when the OFF is selected for the MESSAGE item in the SCREEN menu ( 54), and the projector will go into the FREEZE mode, which the picture is frozen. To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again. Temporarily freezing the screen ● The projector automatically exits from the FREEZE mode when some control...
Page 30
30 CALIBRATIONASPECTACCENTUALIZERHDCR AV MUTE POSITIONESC MENU RESET IWBAUTOPAGEDOWNONOFFFREEZE UP1 2 ENTER D-ZOOM- +＋ーVOLUMEMAGNIFYMYBUTTON INPUT KEYSTONETEMPLATE CALIBRATION ASPECTACCENTUALIZERHDCR AV MUTE POSITIONESC MENU RESET IWB AUTO PAGE DOWN ON OFF FREEZE UP 1 2 ENTER D-ZOOM-+ ＋ ー VOLUMEMAGNIFYMYBUTTON INPUT KEYSTONETEMPLATE Operating 1.To start the MENU, press the MENU button. The MENU you last used (EASY or ADVANCED) will appear. EASY MENU has priority to appear just after powered on. Using...