Honeywell 1911ier3 Manual

Function Code Transmit
When this selection is enabled and function codes are contained 
within the scanned data, the scanner transmits the function code to 
the terminal.  Charts of these function codes are provided in your 
User’s Guide.  When the scanner is in keyboard wedge mode, the 
scan code is converted to a key code before it is transmitted.
Enable
(Default)
Disable 

Data Format Editor Instructions
The following are abbreviated instructions for entering a data format.  
For complete instructions refer to your User’s Guide, available at our 
website, 
www.honeywellaidc.com.
1.Scan the Enter Data Format symbol.
2. Primary/Alternate Format: scan 0 for Primary Format
3. Terminal Type: scan 099 for any terminal type
4. Code I.D.: scan 99 for any bar code type
5. Length: scan 9999 for any length bar code.
6. Editor commands: use the Programming Chart that follows.
7. Scan...

Programming Chart
0
2 1
4 3
5
6
7 

A
B
C
D
E
F
9
8
Save 

EZConfig-Scanning
To access additional features for the scanner use EZConfig-
Scanning, an online configuration software tool, available from our 
website at 
www.honeywellaidc.com. 
Technical Assistance
Contact information for technical support, product service, and repair 
can be found at www.honeywellaidc.com.
Limited Warranty
Refer to www.honeywellaidc.com/warranty_information for your product’s warranty information.
Patents
For patent information, refer to www.honeywellaidc.com/patents.
User...

Web Address: www.honeywellaidc.com