Honeywell control panel LYNX Touch L5200L7000 Security Systm User Manual

Home Automation  
- 11 - 
Scenes 
5200-100-110-V1
Ready To Arm
Edit DeleteAdd New
Scene
Scene 1
Burglary AlarmScene 2
CO Alarm
Scene 3
Fire AlarmScene 4
Arm Stay
 3.  Select the scene you wish to edit or delete. 
4.  Select the “Edit” or “Delete” button. 
5.   If “Edit” was selected, the system advances to the Scene. Edit as 
required and proceed to step 6. If delete was selected proceed to 
step 7. 
6.  Select Save when complete. The system returns to the Z-Wave 
device screen. Select the “” button as...

Home Automation  
- 12 - 
Schedules 
General Information 
The Schedules Feature can be used to program the system to automatically perform certain functions (i.e.; 
automatically arming the system in Stay mode and activating output [Z-Wave] devices) at a scheduled time, 
day of the week or month, as applicable. 
Programming a Scheduled Function 
5200-100-001-V0
Video
NoticesTraffic
Security
News5-Day Forecast
2
68
351:
F
PMOctober 1, 2013
Feels Like 71
Mostly Sunny
F
Automation
Ready To Arm
 1.  With the...

Home Automation  
- 13 - 
Schedules 
 
7. Program the following options based upon the Frequency 
selected in step 6: 
Once Date/Start Time/End Time 
Daily  Start Time/End Time 
Weekday  Start Time/End Time 
Weekly  Start Time/End Time/Day of the Week, 
Monthly  Start Time/End Time/Day of the Month 
8. Select “Type” then scroll through and select one of the 
following options: 
None  
Auto Night Stay 
Auto Stay 
Rules 
Disarm Notification 
Scene (displayed when Z-Wave has been enabled) 
Ready to Arm ......

Home Automation  
- 14 - 
Rules 
General Information 
Up to 40 rules can be programmed. Rules 1 through 20 are used for Triggers, Z-Wave Scenes and Follow-Me 
Messages. Rules 21 through 40 are used for Z-Wave Scenes and for E-mail notification but are only accessible 
through TotalConnect Service. Check with your Installer to see which options are available to you. 
The following options are programmed in this section: 
Programming Field Action
Rule 1 - 20:  Select Rule 1 -20  
Note: Rules 21-40 are only...

Home Automation  
- 15 - 
Rules 
Ready To Arm
5200-100-058-V0
A Q
Z S W
L OP
M K I
NJ U
V G T
B H Y
CF R
XD E
Clear
Done
123!@#
abc...
 4.  Select the “Name” key and then enter up to 13 characters of 
text on the displayed keyboard to assign a name to the Rule.  
Note:  Select the “ABC…” key to switch the keyboard between 
upper/lower case or the “123!@#” key to switch to numbers. 
5.  Once you are finished, select “Done”. The system returns to the 
Rules screen. 
 
Ready To Arm
5200-100-060-V0
Name...

Home Automation  
- 16 - 
Rules 
Ready To Arm
5200-100-062-V0
Name
Save
Type
Trigger Output01
Start Zone Type
Not Used
Start System Operation
Not Used
Action
None
Stop Zone Type
Not Used
Stop System Operation
Not Used 
OR 
 
Ready To Arm
5200-100-111-V0
Name
Save
Type
Scene
Scene
Zone Type Fault
Not UsedSystem Operation 1
Not Used
Action
None
Zone Type Restore
Not UsedSystem Operation 2
Not Used 9.  Select “Stop Zone Type” OR “Zone Type Restore” (if Scene 
was selected in the Type field). The system...

Home Automation  
- 17 - 
Rules 
Editing or Deleting Rules 
Ready To Arm
5200-100-065-V0
Device 1
System Armed
Follow Me
Edit Delete
Device 3
New
Device 5
NewDevice 2
New
Device 4
New
Device 6
New
1.  At the Rules Programming Screen, select the Rule that you 
wish to edit or delete.  
Note:  Rules 21-40 are only accessible through TotalConnect Service. 
2.  To edit the rule select the Edit button and proceed to step 3. To 
delete the rule, select the Delete button and proceed to step 4. 
 
Ready To Arm...

Home Automation  
- 18 - 
Garage Door Opener Operation 
General Information 
If your system has been equipped with a 5877 Relay Receiver and 5822T Tilt Sensor or Door/Window 
Transmitter (i.e.; 5616), it can be used to remotely operate and/or view the status of up to three Garage Doors. 
The System can be armed when the garage door is open, and once the garage door has been closed, the zone will 
be monitored as part of the system without providing burglary protection. It can also be programmed for...

Home Automation  
- 19 - 
Garage Door Opener Operation 
Ready To Arm
5200-100-113-V0
Garage Door 1
CLOSEDPress to open
Edit BackClose inClose at
Garage Door Operation Screen 
Button or Icon  Function 
Edit  Used to modify description of Garage Door 
Close in   Provides access to keypad used to set a specific period of 
time (up to 12 hours and 59 minutes) before an open garage 
door closes automatically. If programmed the time will also be 
displayed. 
Close at  Provides access to keypad used to set a...

Home Automation  
- 20 - 
Advanced Z-Wave Operations 
View Enrolled Z-Wave Devices or Controllers 
To View a list of the enrolled devices perform the following: 
Step Action 
1.  At the Dashboard screen or Security Home Screen select the “Automation” icon. 
2.  At the Automation Screen, select “Tools”. 
3.  At the “Device Management” screen, select “Advanced Tools”. 
4.  Enter the Master User Code on the displayed keypad. 
5.  At the Advanced Tools Screen, select “View Enrolled Devices” OR “View Enrolled...