Home > Honeywell > Control panel > Honeywell control panel VISTA10SE VIA30PSE Security Systems User Manual

Honeywell control panel VISTA10SE VIA30PSE Security Systems User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Honeywell control panel VISTA10SE VIA30PSE Security Systems User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 178 Honeywell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							–41–
    FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68 STATEMENT
    This equipment complies with Part 68 of the FCC rules. On the front cover of this equipment is a label that contains, among otherinformation, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information mustbe provided to the telephone company.This equipment uses the following jacks: An RJ31X is used to connect this equipment to the telephone network.The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephoneline may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should notexceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contactthe telephone company to determine the maximum REN for the calling area.If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary dis-continuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon aspossible. Also, you will be advised of your right to file a complaint with the FCC if you believe necessary.The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of theequipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications inorder to maintain uninterrupted service.If trouble is experienced with this equipment, please contact the manufacturer for repair and warranty information. If the trouble iscausing harm to the telephone network, the telephone company may request you remove the equipment from the network until theproblem is resolved.There are no user serviceable components in this product, and all necessary repairs must be made by the manufacturer. Other repairmethods may invalidate the FCC registration on this product.This equipment cannot be used on telephone company-provided coin service. Connection to Party Line Service is subject to statetariffs.This equipment is hearing-aid compatible.When programming or making test calls to an emergency number, briefly explain to the dispatcher the reason for the call. Perform suchactivities in the off-peak hours; such as early morning or late evening. 
    						
    							–42–
    WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM
    While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or otheremergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reasons.For example:• Intruders may gain access through unprotected openings or have the technical sophistication to bypass an alarm sensor ordisconnect an alarm warning device.• Intrusion detectors (e.g. passive infrared detectors), smoke detectors, and many other sensing devices will not work without power.Battery operated devices will not work without batteries, with dead batteries, or if the batteries are not put in properly. Devicespowered solely by AC will not work if their AC power supply is cut off for any reason, however briefly.• Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the alarm receiver. Even if the signalpath has been recently checked during a weekly test, blockage can occur if a metal object is moved into the path.• A user may not be able to reach a panic or emergency button quickly enough.• While smoke detectors have played a key role in reducing residential fire deaths in the United States, they may not activate orprovide early warning for a variety of reasons in as many as 35% of all fires, according to data published by the Federal EmergencyManagement Agency. Some of the reasons smoke detectors used in conjunction with this System may not work are as follows.Smoke detectors may have been improperly installed and positioned. Smoke detectors may not sense fires that start where smokecannot reach the detectors, such as in chimneys, in walls, or roofs, or on the other side of closed doors. Smoke detectors also maynot sense a fire on another level of a residence or building. A second floor detector, for example, may not sense a first floor orbasement fire. Moreover, smoke detectors have sensing limitations. No smoke detector can sense every kind of fire every time. Ingeneral, detectors may not always warn about fires caused by carelessness and safety hazards like smoking in bed, violentexplosions, escaping gas, improper storage of flammable materials, overloaded electrical circuits, children playing with matches, orarson. Depending upon the nature of the fire and/or the locations of the smoke detectors, the detector, even if it operates asanticipated, may not provide sufficient warning to allow all occupants to escape in time to prevent injury or death.• Passive Infrared Motion Detectors can only detect intrusion within the designed ranges as diagrammed in their installation manual.Passive Infrared Detectors do not provide volumetric area protection. They do create multiple beams of protection, and intrusion canonly be detected in unobstructed areas covered by those beams. They cannot detect motion or intrusion that takes place behindwalls, ceilings, floors, closed doors, glass partitions, glass doors, or windows. Mechanical tampering, masking, painting or sprayingof any material on the mirrors, windows or any part of the optical system can reduce their detection ability. Passive InfraredDetectors sense changes in temperature; however, as the ambient temperature of protected area approaches the temperature rangeof 90° to 105°F (32° to 40°C), the detection performance can decrease.• Alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers if they are located on the other side ofclosed or partly open doors. If warning devices sound on a different level of the residence from the bedrooms, then they are lesslikely to waken or alert people inside the bedrooms. Even persons who are awake may not hear the warning if the alarm is muffledfrom a stereo, radio, air conditioner or other appliance, or by passing traffic. Finally, alarm warning devices, however loud, may notwarn hearing-impaired people or waken deep sleepers. 
    						
    							–43–
    WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM (continued)
    • Telephone lines needed to transmit alarm signals from a premises to a central monitoring station may be out of service or temporarilyout of service. Telephone lines are also subject to compromise by sophisticated intruders.• Even if the system responds to the emergency as intended, however, occupants may have insufficient time to protect themselvesfrom the situation. In the case of a monitored alarm system, authorities may not respond appropriately.• This equipment, like other electrical devices, is subject to component failure. Even though this equipment is designed to last as longas 10 years, the electronic components could fail at any time.The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate maintenance. This alarmsystem should be tested weekly to make sure all sensors and transmitters are working properly.Wireless transmitters (used with some systems) are designed to provide long battery life under normal operating conditions. Longevityof batteries may be as much as 4 to 7 years, depending on the environment, usage, and the specific wireless device being used.External factors such as humidity, high or low temperatures, as well as large swings in temperature, may all reduce the actual batterylife in a given installation. This wireless system, however, can identify a true low battery situation, thus allowing time to arrange achange of battery to maintain protection for that given point within the system.Installing an alarm system may make one eligible for lower insurance rates, but an alarm system is not a substitute for insurance.Homeowners, property owners and renters should continue to act prudently in protecting themselves and continue to insure their livesand property.We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their loved ones tolearn about these developments.
    SERVICING INFORMATION
    Your local authorized service representative is the person best qualified to service your alarm system. Arranging aregular program with that person is advisable. Your local service representative is:
    NAME:_____________________________________________  PHONE:__________________________  
    ADDRESS:______________________________________________________________________________  
    ______________________________________________________________________________   
    						
    							N7229V2 Rev B.   1/97
    ADEMCO ONE YEAR LIMITED WARRANTY
    Alarm Device Manufacturing Company, a Division of Pittway Corporation, and its divisions, subsidiaries and affiliates (Seller), 165Eileen Way, Syosset, New York 11791, warrants its security equipment (the product) to be free from defects in materials andworkmanship for one year from date of original purchase, under normal use and service. Sellers obligation is limited to repairing orreplacing, at its option, free of charge for parts, labor, or transportation, any product proven to be defective in materials orworkmanship under normal use and service. Seller shall have no obligation under this warranty or otherwise if the product is altered orimproperly repaired or serviced by anyone other than the Seller. In case of defect, contact the security professional who installed andmaintains your security equipment or the Seller for product repair.This one year Limited Warranty is in lieu of all other express warranties, obligations or liabilities. THERE ARE NO EXPRESSWARRANTIES, WHICH EXTEND BEYOND THE FACE HEREOF. ANY IMPLIED WARRANTIES, OBLIGATIONS OR LIABILITIES MADEBY SELLER IN CONNECTION WITH THIS PRODUCT, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESSFOR A PARTICULAR PURPOSE OR OTHERWISE, ARE LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OFORIGINAL PURCHASE. ANY ACTION FOR BREACH OF ANY WARRANTY, INCLUDING BUT NOT LIMITED TO ANY IMPLIEDWARRANTY OF MERCHANTABILITY, MUST BE BROUGHT WITHIN 12 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASESHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANYOTHER WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS ORDAMAGE IS CAUSED BY THE SELLERS OWN NEGLIGENCE OR FAULT. Some states do not allow limitation on how long an impliedwarranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not applyto you.Seller does not represent that the product may not be compromised or circumvented; that the product will prevent any personal injury orproperty loss by burglary, robbery, fire or otherwise; or that the product will in all cases provide adequate warning or protection. Buyerunderstands that a properly installed and maintained alarm may only reduce the risk of a burglary, robbery, fire or other eventsoccurring without providing an alarm, but it is not insurance or a guarantee that such will not occur or that there will be no personal injuryor property loss as a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTYDAMAGE OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS HELD LI-ABLE, WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED WARRANTY OROTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, SELLERS MAXIMUM LIABILITY SHALL NOT IN ANY CASE EXCEED THEPURCHASE PRICE OF THE PRODUCT, WHICH SHALL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER. Thiswarranty gives you specific legal rights, and you may also have other rights which vary from state to state. No increase or alteration,written or verbal, to this warranty is authorized.
    165 Eileen Way, Syosset, New York 11791
    Copyright © 1997 PITTWAY CORPORATION 
    						
    All Honeywell manuals Comments (0)

    Related Manuals for Honeywell control panel VISTA10SE VIA30PSE Security Systems User Manual