Home > Honeywell > Thermostat > Honeywell Ct3200a1001 1 Manual

Honeywell Ct3200a1001 1 Manual

Add to Favourites
    Download as PDF

    View the Honeywell Ct3200a1001 1 Manual for free. All the Honeywell manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 69-1631-1 OWNER’S GUIDE ® U.S. Registered Trademark Copyright © 2003 Honeywell International Inc. All Rights Reserved CT3200 Programmable Thermostat Welcome to the world of comfort and energy savings with your new Honeywell Programmable Thermostat. Your new thermostat will automatically control the temperature in your home, keeping you comfortable while saving energy. Weekday/Weekend (5-day/2-day) Programmable Heat and/or Cool Low Voltage (20 to 30 Vac) Thermostat and Mounting Plate Model CT3200...
    Page 2 69-1631—1 2 MERCURY NOTICEIf you are removing an old thermostat that contains mercury in a sealed tube (Fig. 1), do not place the old thermostat in the trash. Contact your local waste management authority for instructions regarding recycling and the proper disposal of the old thermostat. INSTALLATION Verify You Have Correct Thermostat Make sure that the CT3200 is the correct thermostat for your heating/cooling system. Read the compatibility chart below to determine which system you have. If your...
    Page 3 3 69-1631—1 Step 1. Prepare for Installation 1.Carefully unpack your new thermostat. Save your receipt and make sure you have the following parts: • Thermostat and mounting plate • Labels • Screws and anchors • Installation and Programming Instructions 2.Gather the needed tools and supplies listed below. 3.Make sure that your heating and cooling systems are working properly. If there is a problem with either system, call a heating/air conditioning contractor—the problem may persist after you install...
    Page 4 69-1631—1 4 Step 2. Remove Old Thermostat Fig. 2. a.Turn off power to the heating/cooling system, either at the furnace or at the fuse/circuit breaker panel. b. Remove the cover of your old thermostat (Fig. 2). c. Unscrew and remove the old thermostat’s mounting plate from the wall, but do not disconnect the wires. d. Inspect the old thermostat wiring. If wiring meets any of the following conditions, see special wiring instruc- tions section after Step 7. Fig. 3. • The old thermostat is a clock...
    Start reading Honeywell Ct3200a1001 1 Manual

    Related Manuals for Honeywell Ct3200a1001 1 Manual

    All Honeywell manuals