Honeywell Rlv4305a1000e Manual

RLV4305
9
To modify the schedule:
1)Press the Pgm button. Each time you press 
the Pgm button, the thermostat displays 
one of the periods of the schedule in the 
following order:
2)Press the Hour and Min buttons to set the 
start time of the displayed period.
NOTE: To cancel the period, press the 
Mode button. Instead of displaying the start 
time of the period, the thermostat will dis-
play --:--. During operation, the thermostat 
will skip over that period.
3)Press the Up or Down button to set the...

Owner’s Guide
10
To place the thermostat in Manual mode, press the Mode
button until Man appears on the screen. In this mode, any
modification to the temperature setpoint must be done
manually. To set the temperature, press the Up or Down
button. The default setting is 70°F (21.0°C).
To place the thermostat in Away mode, press the Mode button
until Away appears on the screen. This mode is a quick way to
lower the temperature to a predetermined setting before you go
away for an extended length of time....

RLV4305
11
1)Press the Pgm button for 3 
seconds.
2)To display the next parameter, 
press the Pgm button.
3)To modify the displayed 
parameter, press the Up or 
Down button.
4)To exit the menu, press the 
 button or do not press any 
button for 1 minute.
Advanced settings
The first parameter 
appears when the 
menu is displayed.
69-2613ES-01.book  Page 11  Thursday, November 10, 2011  11:38 AM 

Owner’s Guide
12
Advanced settings (cont’d)
Display Parameter Options Default setting
Temperature unit °C / °F °F
Time format 12 hr / 24 hr 12 hr
Fan
1No / Yes No
Away temperature
241°F - 86°F (5.0°C - 30.0°C) 59°F (15.0°C)
Daylight Saving Time
3On / Off Off
Year
400 - 99 09
Month
401 -12 01
Day
401 - 31 01
Early Start
5On / Off Off
Minimum setpoint 41°F - 86°F (5.0°C - 30.0°C) 41°F (5.0°C)
Maximum setpoint 41°F - 86°F (5.0°C - 30.0°C) 86°F (30.0°C)
Keypad lock
6On / Off Off
69-2613ES-01.book  Page 12...

RLV4305
13
1 Fan
Place at Yes if you have a fan-forced heater (to prevent premature burnout of the motor).
Leave at No for better temperature regulation if you do not have a fan-forced heater.
2 Away temperature
Set the temperature you wish to use when the thermostat is in Away mode (see
page 10).
3 Daylight Saving Time
When the Daylight Saving Time function is enabled (On), the thermostat automatically
switches to Daylight Saving Time on the second Sunday of March and to normal time on
the first Sunday...

Owner’s Guide
14
In case of difficulty
PROBLEM SOLUTIONS
Thermostat is hot.This condition is normal. Ensure that the heater capac-
ity does not exceed the thermostat’s maximum load.
Wrong temperature is 
displayed.Correct it if any of the following situations exists:
• The thermostat is exposed to an air draft.
• The thermostat is located near or above a heat
source such as a light dimmer.
Wrong time is displayed.The thermostat was without power for more than 5 
hours.
Temperature does not 
change...

RLV4305
15
WA R N I N G: All parameters, except the clock (time and day), return to
their default settings when the thermostat is reset.
1)Press the Mode button until Standby appears on the screen.
2)Press the   button for 6 seconds.
3)The thermostat will display rSt (reset) for 2 seconds to indicate it is 
reset and will then return to normal display.
During a power outage, the thermostat display remains lit for the first 2
minutes. During this time, the LP (low power) indicator appears and all
buttons...

Owner’s Guide
16
Supply: 120/240 VAC, 60 Hz
Minimum load: 0.83 A (resistive only)
200 W @ 240 V AC
100 W @ 120 V AC
Maximum load: 14.6 A (resistive only)
3500 W @ 240 V AC
1750 W @ 120 V AC
Display range: 32°F to 99°F (0°C to 50.0°C)
Setpoint range: 41°F to 86°F (5.0°C to 30.0°C)
Resolution: 1°F (0.5°C)
Storage temperature: -4°F to 120°F (-20°C to 50°C)
Specifications
69-2613ES-01.book  Page 16  Thursday, November 10, 2011  11:38 AM 

RLV4305
17
Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or mate-
rials, under normal use and service, for a period of one (1) year from the date of purchase by the con-
sumer. If at any time during the warranty period the product is determined to be defective or
malfunctions, Honeywell shall repair or replace it (at Honeywells option).
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from which...

Automation and Control Systems
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
http://yourhome.honeywell.com
Printed in USA
69-2613ES-01            11-2011
69-2613ES-01.book  Page 18  Thursday, November 10, 2011  11:38 AM