Home > Honeywell > Thermostat > Honeywell Rpls730b1000u Manual

Honeywell Rpls730b1000u Manual

Add to Favourites
    Download as PDF

    View the Honeywell Rpls730b1000u Manual for free. All the Honeywell manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 1/4 The RPLS730B / RPLS731B programmable wall switch has been designed to control lightings and motors: NOTE: This switch cannot be used if there are not at least 2 white wires joined by a connector inside the electrical box. 1) Cut power at the circuit breaker to avoid electric shock. 2) Remove the existing switch. 3) Install the new switch as shown in the diagram below. 4) Apply power at the circuit breaker. Applications Load type Maximum load Examples Resistive load2400 W (20 A @ 120 V)•...
    Page 2 2/4 1) Pry the switch door open from the bottom using a small screwdriver. 2) Ensure the ON/OFF selector is set to ON. 3) Reset the switch using a paper clip. 0:00 will flash. If the display is blank: • Ensure the ON/OFF selector is properly engaged in the ON position. Push it to the right using a small screwdriver. • At first power-up after the installation, the screen of the switch may be blank or dim, or become so when you turn the light on. However, during that time, the switch is fully...
    Page 3 3/4 You can set up to 7 programs. To set a program, you need to enter its start time (ON) and its end time (OFF). 1) Pry the switch door open using a small screwdriver. 2) Press the PGM button to display a program and its On or Off time. For example, when you first press PGM, program number 1 (P1) and its On time (ON) will appear. -:-- will appear instead of the time if the program is not set (inactive). 3) Press the DAY button to select the day to which you want to apply the program. 4)NOTE: If you...
    Page 4 4/4 R Supply: 120 VAC, 50 / 60 Hz Maximum load: 2400 watts resistive or inductive, 1 HP motor Operating temperature range: 5°F to 122°F (-15°C to 50°C) Storage temperature range: -4°F to 122°F (-20°C to 50°C) Power outage: The programs are protected by a rechargeable battery. The screen is blank during the power outage. Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date...
    Start reading Honeywell Rpls730b1000u Manual

    Related Manuals for Honeywell Rpls730b1000u Manual

    All Honeywell manuals