Honeywell thermostat evohome sundial pack User Manual

							i
evotouch   
						

							ii 
						

							1
Congratulations on purchasing the Honeywell 
evotouch multi-zone ‘wireless’ comfort controller. 
The evotouch allows independent temperature 
control of up to eight zones completely automatically 
according to your needs.
This independent zone control means that only the 
occupied areas of your home are controlled at a 
comfortable temperature whilst the unused areas 
remain at a reduced temperature resulting in optimal 
comfort combined with maximum energy saving.  
As evohome is a ‘wireless’ solution there is no need 
to run wires around your home, making installation 
and any future upgrades simple and convenient.
Keep in touch with your installer or visit the 
Honeywell website to learn of future upgrades that 
can deliver even more comfort and convenience into 
your evohome system.
ENGLISH
ENGLISH
Quick Start User Guide 
						

							2
1 Current date and time
The clock is automatically adjusted for Daylight Saving Time.
2 Current zone
Shows the zone currently being controlled.
3 Measured temperature
Shows the measured temperature in the current location.
4 Increase temperature setting
Increases the set temperature until the next period.
5 Current temperature setting
Shows the set temperature defined by the schedule, or an override.
123
4
5
6
10987
Home screen overview
6 Reduce temperature setting
Reduces the set temperature until the next period.
7 Select other options
Allows you to display an overview of the temperatures in all zones, 
edit schedules, and change other settings.
8 Display/set zones
Allows you to define different schedules for different areas of your 
home.
9 Set economy mode
Reduces the temperature settings in all zones by 3 °C at a single 
button press, to save energy.
10 Lifestyle
For specific purposes e.g. holiday, shift program.
11 Information on additional components
Shows e.g. the outdoor temperature, when available.
12 Battery level
Shows the battery level when evotouch is not fitted to the dock.
11
12  
						

							3
The Honeywell evotouch is a wireless programmable controller 
which can individually control up to 8 zones. It will control your 
heating system efficiently to provide maximum comfort and energy 
savings.
The evotouch is controlled via a large touch-screen display, with an 
intuitive user interface for easy operation.
The evotouch supports a wide range of applications, from simple 
single zone boiler control to multi-zone underfloor heating and 
radiator control using our proven RF (Radio Frequency) technology 
for communication with the peripheral devices.
Mounting
You can either mount your evotouch on a wall mounted dock, or 
on a table-top stand. For convenience you can remove evotouch 
from the dock and program the unit in your hands. When removed 
from the stand the evotouch will remain powered for about 2 hours 
before needing to be replaced for charging.
Wireless control
The evotouch uses wireless communication to transmit and receive 
information from the other control devices in the system. These 
can include, for example, individual radiator controllers, room 
sensors, under floor heating controllers, and other wireless devices 
depending on the application.
Introduction
ENGLISH  
						

							4
System functions
Zoning
You can independently control the temperature in individual rooms, 
or groups of rooms, according to different schedules. This allows 
you to optimise comfort and minimise energy usage, reducing your 
fuel bills.
Domestic hot water
The domestic hot water setpoint temperature can be set and 
controlled by the time schedule.
Optimisation
Your control system has several Optimisation functions. These 
functions aim to save energy while making you as comfortable as 
possible. Optimisation can be activated individually for each zone.
Optimum start works by measuring how quickly your system 
normally heats. evotouch will calculate the correct time to start 
heating, so that you reach your comfort temperature when you want 
it. 
The times you set are the times when you want the heating to 
be at a desired temperature. The system will start heating the 
zone early to meet it‘s time schedule.
Delayed start works by using the normal programmed start times, 
comparing the current temperature with the set temperature 
and delaying the start a little depending on how close these 
temperatures are to each other.
Optimum stop saves energy and money by switching off a little 
bit earlier than the normal programme time. If your home is up to 
temperature, you will not notice the effect on the temperature, but 
you will see a difference in your fuel bill.
Optimisation only applies to your heating.
Special day
The special day function provides 2 independent time programs 
with daily schedule for up to 99 days for specific purposes, e.g. 
early and late shift program. 
Future expansion
evotouch is in an expandable system. An upgrade port on the 
controller allows your installer to update the unit to take advantage 
of future developments and new functionality. 
						

							5
•	 If	necessary	press	the	main	screen	to	display	the	home	screen:To set the time
You can optionally press CLOCK SETTINGS to change the time 
format between 24 HR and 12 HR, and choose automatic Daylight 
Saving time.
To set the date
NOTE:	Pressing	BACK from any screen cancels any changes you 
made and returns to the previous screen.
Press	 or  to set the day, month, and year
Press	SET DATE to set the date
Press	 or  to set the hour and minutes.
Press	MENU to display the MAIN MENU
Press	SETTING MENU to display the SETTING MENU
Press	TIME/DATE SETTING to set the timePress	DONE to set the date
Changing the time and date
ENGLISH      
						

							6
The standby display shows the measured temperature from 
evotouch’s	internal	sensor,	and	the	date	and	time:
Either a static or a dynamic screensaver is available.
•	 Press	anywhere	on	this	screen	to	display	the	Home	Screen.
To override the programmed temperature
The temperature will stay at the value you have set until the start of 
the next scheduled period. The time is shown below the measured 
temperature;	for	example:	Set until 18:00.
To change the override duration
The	following	screen	is	displayed:
•	 Press	DONE to confirm.
Once you have created an override you can change or cancel it at 
any time by pressing Press to Change on the Home Screen.
Manual override 
Press	 or  to adjust the temperature setting
Press	Press to Change
Press	 or  to specify when the override should end
Press	PERMANENT to make the override permanent     
						

							7
ENGLISH
If there are several zones the next screen shows information about 
the first zone. Press	PREVIOUS ZONE or NEXT ZONE to change zone.
 
The VIEW SCHEDULE screen then shows you the schedule for 
MONDAY	and	allows	you	to	edit	it:
To edit a period
•	 Press	the	button	of	the	period	you	want	to	edit.
The	following	screen	is	displayed:
 
When you change the start time, the end time of the previous period 
will automatically be changed to match.
•	 Press	DONE to show the changes on the VIEW SCHEDULE 
screen for the day.
If you have more than one zone you are given the option of copying 
the schedule to another zone.
Changing the schedules
From the Home Screen press ZONING 
(or VIEW/EDIT 
SCHEDULE)
Press	VIEW/EDIT SCHEDULE
Press	 or  in the START TIME section to change the start time of the period
Press	 or  in the SETTING section to change the temp erature
Press	NEXT DAY to change day      
						

							8
To add a period
•	 Set	the	START	TIME	and	SETTING	for	the	new	period,	as	
described in To edit a period, page 7.
The existing periods will be adjusted accordingly.
•	 Press	DONE to show the new period on the VIEW SCHEDULE 
screen for the day.
To delete a period
NOTE:	You	cannot	delete	the	last	remaining	period.
To copy the schedule to other days
This	screen	lets	you	specify	which	days	to	copy:
•	 Press	DONE.
A screen will confirm which days the schedule has been copied to.
•	 Press	DONE to return to the VIEW SCHEDULE screen.
When you press DONE you will then be given the option of copying 
the schedule to another zone, or editing another schedule.
•	 Select	an	option,	or	press	DONE to return to the ZONING menu.
Press	DELETE PERIOD
Press	ADD PERIOD
Press	COPY
Press	the	days	you	want to copy to
Press	WEEK DAYS to select all the week days
Press	WEEKEND DAYS to select SAT and SUN
Adding and deleting periods