Home > Honeywell > Control panel > Honeywell Tz 4 Manual

Honeywell Tz 4 Manual

Add to Favourites
    Download as PDF

    View the Honeywell Tz 4 Manual for free. All the Honeywell manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 PRODUCT DATA 68-0259-1 ® U.S. Registered Trademark Copyright © 2002 Honeywell • All Rights Reserved TZ-4 TotalZone® Zone Control Panel APPLICATION The TZ-4 TotalZone Zone Control Panel controls single-stage, multi-stage, conventional or heat pump heat/cool equipment. It controls 2, 3 or 4 zones, and is expandable up to 32 zones with optional TotalZone® Add-A-Zone™ Four Zone Control Panel. FEATURES • Up to three stages heat and two stages cooling can be controlled by thermostat, built-in timer, or...
    Page 2 TZ-4 TOTALZONE® ZONE CONTROL PANEL 68-0259-1 2 SPECIFICATIONS Input Ratings: Voltage: 20-30 Vac, 50/60 Hz. Power: 13 VA, nominal. Output Ratings: 1.5A run, 200,000 cycles (30 Vac). 3.5 inrush. 1.5A run, 100,000 cycles (30 Vac) 7.5A inrush. Humidity Ratings: 5 to 90 percent RH, non-condensing. Temperature Ratings: Shipping: -20° to 120°F. Operating: -40° to 150°F. Dimensions: 10-3/4 in. H x 12-3/4 in. W x 1-7/8 in. D. See Fig. 1. Mounting: Mounts with four 1 in. no. 8 screws (provided) through holes...
    Page 3 TZ-4 TOTALZONE® ZONE CONTROL PANEL 3 68-0259-1 aHeat pump thermostat with single Y first-stage terminals. See Heat Pump Thermostats section and Fig. 6.bMulti-stage and heat pump thermostats are not required to control multi-stage and heat pump systems with TotalZone. They are used only when second stage or emergency heat control from the zone thermostat is needed. cThe Y594R1243 must be wired to the panel using the B terminal for changeover.dCut thermostat second-stage variable heating anticipator wire...
    Page 4 TZ-4 TOTALZONE® ZONE CONTROL PANEL 68-0259-1 4 INSTALLATION Mounting CAUTION Equipment Damage Hazard. Do not mount TZ-4 inside HVAC equipment Mount only on wall or on cold air return. Identifying DIP Switches This panel has two banks of DIP switches, DIP switch 4 (S4) and DIP switch 5 (S5), see Fig 15. Each bank has eight individual switches that are identified by two numbers; the first number is the bank number (4 or 5) and the second number identifies the individual switch. For example, DIP 5-1 is...
    Start reading Honeywell Tz 4 Manual

    Related Manuals for Honeywell Tz 4 Manual

    All Honeywell manuals