Home > Honeywell > Transmitter > Honeywell wireless key transmitters 58056 User Manual

Honeywell wireless key transmitters 58056 User Manual

Add to Favourites
    Download as PDF

    View the Honeywell wireless key transmitters 58056 User Manual for free. All the Honeywell manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 ADEMCO 5805-6 Wireless Key Transmitter USER GUIDE GENERAL INFORMATION The 5805-6 is a compact, 6-button portable wireless transmitter that permits an alarm system to be controlled remotely. The transmitter is typically used for arming, disarming, panic and output relay operation. Check with your installer for operation of the buttons on your unit. OPERATING THE BUTTONS To activate a programmed function, press and hold the associated button(s) down. The LED will flash green to indicate the...
    Page 2 Installing a new battery Before installing a new battery, Press and hold any button for at least two seconds 1. Insert a new battery in case back location as shown in Figure 3. Positive (+) end must face up. Use Panasonic CR2032, Maxell CR2032, Duracell DL 20325, or Varta CR2032 lithium battery only. ! Improper installation will result in damage to the battery. 2. Close the case by snapping case front and back together. 3. Press any button and verify that the LED flashes. NOTE...
    Start reading Honeywell wireless key transmitters 58056 User Manual

    Related Manuals for Honeywell wireless key transmitters 58056 User Manual

    All Honeywell manuals