HP Color LaserJet CM3530fs MFP User Manual

							Security features●Secure Disk Erase
● Security lock (optional)
● Job storage
● User PIN authentication for stored jobs
● Digital Send Software (DSS) authentication
● IPsec security
● Support for HP High Performance hard disks
Copying and sending
●Automatic color sensing for copies
● Modes for text, graphics, and mixed text and graphics formats
● Job-interrupt feature
● Multiple pages per sheet
● Control panel animations (for example, jam recovery)
● Scan and send to e-mail
◦Local address book for e-mail and fax
◦ LDAP addressing
● Send to folder
● Automatic duplex (two-sided) scanning
Table 1-2
  Features (continued)
ENWW Product features 7
 
						

							Product walkaround
Front view
1
14
15
13
2
4
5
6
7
8
9
3
12
11
10
1Color control panel
2Document-feeder top-cover (lift open to clear jams)
3Automatic document-feeder (ADF)
4Document-feeder output bin
5Scanner lid
6Convenience stapler (only for the HP Color LaserJet CM3530fs MFP)
7Right-side door (access for clearing jams)
8Tray 1 (pull the handle to open the tray)
9Lower-right door (access for clearing jams)
10On/off button
11Optional Tray 3
12Tray 2
13Front door (access to print cartridges and toner collection unit)
14Standard output bin
15Hardware integration pocket
8 Chapter 1   Product basicsENWW
 
						

							Back view
12
4
3
1Connector for the scanner and ADF assembly
2Interface ports
3Power connection
4Slot for a cable-type security lock
ENWWProduct walkaround 9
 
						

							Interface ports
8
21
3
4
5
67
1EIO interface expansion slot
2Host USB port (for third-party solutions)
3Formatter connectivity LED (lit when the formatter is engaged)
4Heartbeat LED (blinks when the formatter is working correctly)
5Hi-Speed USB 2.0 port
6RJ-45 network port (includes HP Jetdirect LEDs)
7Foreign-interface harness (for connecting third-party solutions)
8Fax connection (standard for the HP Color LaserJet CM3530fs MFP, optional for the HP Color LaserJet CM3530
MFP)
10 Chapter 1   Product basicsENWW
 
						

							Serial number and model number location
Model nameModel number
HP Color LaserJet CM3530 MFPCC519A
HP Color LaserJet CM3530fs MFPCC520A
ENWW Product walkaround 11
 
						

							12 Chapter 1   Product basicsENWW
 
						

							2 Control panel
●Use the control panel
●
Navigate the Administration menu
●
Information menu
●
Default Job Options menu
●
Time/Scheduling menu
●
Management menu
●
Initial Setup menu
●
Device Behavior menu
●
Print Quality menu
●
Troubleshooting menu
●
Resets menu
●
Service menu
ENWW 13
 
						

							Use the control panel
The control panel has a VGA touchscreen that provides access to all product functions. Use the buttons
and numeric keypad to control jobs and the product status. The LEDs indicate overall product status.
Control-panel layout
The control panel includes a touchscreen graphical display, job-control buttons, a numeric keypad, and
three light-emitting diode (LED) status lights. 
hp
7
5
8
6
314
910
2
111213
1Hardware integration portArea for adding third-party security devices
2Touchscreen graphical displayUse the touchscreen to open and set up all product
functions.
3Brightness-adjustment buttonUse this button to increase or decrease the brightness of
the touchscreen display.
4Numeric keypadUse this area to specify the number of copies and other
numeric values.
5Sleep buttonIf the product is inactive for a long period of time, it
automatically enters a sleep mode. To place the product
into sleep mode or to reactivate the product, press the
Sleep button.
6Reset  buttonResets the job settings to factory or user-defined default
values.
7Stop buttonStops the active job and opens the Job Status screen.
8Start  buttonBegins a copy job, starts di gital sending, starts a fax job,
or continues a job that has been interrupted.
9# buttonUse this button to indicate a required pause for a fax
number.
10Attention  lightThe Attention  light indicates that the product has a
condition that requires intervention. Examples include an
empty paper tray or an error message on the touchscreen.
11Data  lightThe Data  light indicates that the product is receiving data.
14 Chapter 2   Control panel ENWW
 
						

							12Ready lightThe Ready  light indicates that the product is ready to begin
processing any job.
13Clear buttonReturn values to their defaults.
ENWW Use the control panel 15
 
						

							Home screen
The home screen provides access to the product features, and it indicates the current status of the
product.
NOTE:Depending on how the product has been configured, the features that appear on the home
screen can vary.
HP LaserJet  
DDMMYYYY 00.00 AM
2345
6
789
1
1FeaturesDepending on how the product is configured, the f eatures that appear in this area can include
any of the following items:
● Copy
● Fax
● E-mail
● Secondary E-Mail
● Job Status
● Network Folder
● Job Storage
● Workflow
● Supplies Status
● Administration
2Product status lineThe status line provides information about the overall product status. Various buttons appear
in this area, depending on the current status. For a description of each button that can appear
in the status line, see 
Buttons on the touchscreen on page 17.
3Copy typeShows whether copies are color.
4Copy countThe copy count box indicates the number of copies that the product is set to make.
5Help buttonTouch the Help button to open the embedded help system.
6Scroll barTouch the up or down arrows on the scroll bar to see the complete list of available features.
7Sign OutTouch 
Sign Out  to sign out of the product if you have signed in for access to restricted features.
After you sign out, the product restores all options to the default settings.
8Network AddressTouch  Network Address to find information about the network connection.
9 Date  and  time The current date and time appear here. You can select the format that the product uses to show
the date and time, for example 12-hour format or 24-hour format.
16 Chapter 2   Control panel ENWW