HP Color LaserJet CM4730f User Manual

							Product features
Functions
●Two-sided copying (duplexing)
●Color digital sending
●Color access control
●Network printing
Speed and throughput
●31 pages per minute (ppm) when copying and printing on letter-size paper; 30 ppm when copying
and printing on A4-size paper
●25% to 400% scalability when using the scanner glass
●25% to 200% scalability when using the ADF
●Less than 10 seconds to print the first page
●Transmit Once, Raster Image Processing (RIP) ONCE technology
●Recommended maximum monthly print volume of 85,000 pages
●A 533 megahertz (MHz) microprocessor
Resolution
●600 dots per inch (dpi) with Resolution Enhancement technology (REt)
●The product features HP FastRes and HP Resolution Enhancement technology (REt) for 1200 x
1200 effective dpi at full engine speed.
Memory
●256 MB of random-access memory (RAM), expandable to 512 MB by using industry standard 100-
pin double data rate dual inline memory modules (DDR DIMMs)
●Memory Enhancement technology (MEt) that automatically compresses data to use RAM more
efficiently
User interface
●HP Easy Select Control Panel
●An embedded Web server to gain access to support and order supplies (for network-connected
products)
●HP Easy Printer Care software (a Web-based status and troubleshooting tool)
●Internet-enabled supply-ordering capabilities through HP Easy Printer Care software
ENWWProduct features 5
 
						

							Languages and fonts 
●HP Printer Command Language (PCL) 6
●HP PCL 5
●Printer Management Language
●XHTML
●80 scalable TrueType typefaces
●HP PostScript
® 3 emulation (PS)
Copying and sending
●Modes for text, graphics, and mixed text and graphics formats
●Job-interrupt feature (at copy boundaries)
●Multiple pages per sheet
●Operator attendance animations (for example, jam recovery)
●Scan and send to e-mail
●Local address book for e-mail and fax
●LDAP addressing
●Send to folder
●Automatic duplex (two-sided) scanning
Print cartridges (4)
●Print up to 12,000 pages at 5% coverage
●No-shake cartridge design
●Authentic HP print cartridge detection
●Automatic toner strip remover
Paper-handling
●Input
●Tray 1 (multipurpose tray): A multipurpose tray for paper, transparencies, labels, and
envelopes. Holds up to 100 sheets of paper or 20 envelopes.
●Tray 2, 3, and 4: 500-sheet trays. These trays automatically detect standard paper sizes up
to legal and allow printing on custom-size paper.
●Automatic document feeder (ADF): Holds up to 50 sheets of paper.
6 Chapter 1   Product basicsENWW
 
						

							●Duplex printing and copying: Provides two-sided printing and copying (printing on both
sides of the paper).
●ADF duplex scanning: The ADF has an automatic duplexer for scanning two-sided
documents.
●Output
●Standard output bin: The standard output bin is located on the left side of the MFP. This bin
can hold up to 500 sheets of paper.
●ADF output bin: The ADF output bin is underneath the ADF input tray. The bin holds up to
50 sheets of paper, and the MFP automatically stops when this bin is full.
●Optional stapler/stacker (standard on the CM4730fm MFP): The stapler/stacker staples
up to a 30 sheet document and stacks up to 500 sheets. 
●Optional 3-bin mailbox (standard on the CM4730fsk MFP): One bin stacks up to
500 sheets, and two bins stack up to 100 sheets each for a total capacity of 700 sheets.
Connectivity
●IEEE 1284C-compliant parallel connection
●A Foreign Interface Harness (FIH) connection (AUX) for connecting other devices
●Local area network (LAN) connector (RJ-45) for the embedded HP Jetdirect print server
●Optional analog fax card (standard on the CM4730f, CM4730fm, and CM4730fsk MFP models)
●Optional HP Digital Sending Software (DSS)
●Optional enhanced input/output (EIO) cards
●USB 2.0
●ACC port (accessory port with USB host capabilities)
●Accessory port (for connecting third-party devices)
Environmental features
●Sleep setting saves energy (meets ENERGY STAR
® guidelines, Version 1.0).
Security features
●FIH
●Secure Disk Erase
●Security lock
●Job retention
●DSS authentication
●Windows user authentication
●LDAP authentication
ENWWProduct features 7
 
						

							●Group PIN authentication (Group 1 and Group 2)
●User PIN authentication
8 Chapter 1   Product basicsENWW
 
						

							
Product walkaround
Front view
1ADF top cover
2Automatic document feeder (ADF) input tray for copy/scan/fax originals
3Control-panel status lights
4Control-panel display with touch-screen functionality
5Control-panel keypad
6Right-side covers (provides access to t he print cartridges and other consumables)
7Tray 2, 3, and 4
8Paper-level indicators
9On/Off switch
10Output bin
11Scanner lock
ENWW Product walkaround 9
 
						

							
Back view
1Output bin
2Interface ports
3On/off switch
4Power connection
10 Chapter 1   Product basicsENWW
 
						

							
Interface ports
The MFP has five ports for connecting to a computer or a network. The ports are at the left, rear corner
of the MFP.
1Foreign interface harness (FIH)
2USB 2.0
3ACC (accessory port uses host USB protocol)
4Fax connection (for connecting to an optional analog fax accessory)
5Parallel port
6EIO interface expansion slot
7Access port for Kensington lock
8Network connection (embedded HP Jetdirect print server)
9AUX port
Serial number and model number location
The model number and serial number are listed on iden tification labels located on the rear of the printer.
The serial number contains information about the coun try/region of origin, the printer version, production
code, and the production number of the printer.
ENWW Product walkaround 11
 
						

							
serial number
Figure 1-1  Sample model and serial number label
Model nameModel number
HP Color LaserJet CM4730 MFPCB480A
HP Color LaserJet CM4730f MFPCB481A
HP Color LaserJet CM4730fsk MFPCB482A
HP Color LaserJet CM4730fm MFP CB483A
12 Chapter 1   Product basics ENWW
 
						

							2 Control panel
●Use the control panel
●
Navigate the Administration menu
●
Information menu
●
Default Job Options menu
●
Time/Scheduling menu
●
Management menu
●
Initial Setup menu
●
Device Behavior menu
●
Print Quality menu
●
Troubleshooting menu
●
Resets menu
●
Service menu
ENWW13
 
						

							
Use the control panel
The control panel has a VGA touchscreen that provides access to all device functions. Use the buttons
and numeric keypad to cont rol jobs and the device status. The  LEDs indicate overall device status.
Control-panel layout
The control panel includes a touchscreen graphical display, job-control buttons, a numeric keypad, and
three light-emitting diode (LED) status lights. 
1Attention lightThe Attention  light indicates that the devi ce has a condition that requires
intervention. Examples include an empt y paper tray or an error message
on the touchscreen.
2Data  lightThe Data  light indicates that the device is receiving data.
3Ready  lightThe Ready  light indicates that the device is ready to begin processing any
job.
4Brightness-adjustment dialTurn the dial to control the brightness of the touchscreen.
5Touchscreen graphical displayUse the touchscreen to open an d set up all device functions.
6Numeric keypadAllows you to type numeric values for number of copies required and other
numeric values.
7Sleep buttonIf the device is inactive for a long period of time, it automatically enters a
sleep mode. To place the device into  sleep mode or to reactivate the device,
press the  Sleep button.
8Reset  buttonResets the job settings to factor y or user-defined default values.
9Stop buttonStops the active job. While stopped, t he control panel shows the options for
the stopped job (for example, if you press the Stop button while the device
is processing a print job, the contro l panel message prompts you to cancel
or resume the print job).
10Start  buttonBegins a copy job, starts digital s ending, or continues a job that has been
interrupted.
14 Chapter 2   Control panel ENWW