HP Color LaserJet CP2025n User Manual

Use watermarks
A watermark is a notice, such as “Confidential,” that is printed in the background of each page of a
document.
1. On the  File menu, click  Print.
2. Open the  Watermarks  menu.
3. Next to  Mode, select the type of watermark to use. Select  Watermark to print a semi-transparent
message. Select  Overlay to print a message that is not transparent.
4. Next to  Pages, select whether to print the watermark on all pages or on the first page only.
5. Next to  Text, select one of the standard...

Use automatic duplex printing
1.Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer first.
●For all other trays, load the letterhead paper face-down with the top edge at the back of the
tray.
2.On the File menu, click Print.
3.Open the Layout menu.
4.Next to Two-Sided, select either Long-Edge Binding or...

5 Connectivity
●Supported network operating systems
●
USB connection
●
Supported network protocols
●
Configure the product on the network
ENWW33
 

Supported network operating systems
The following operating systems support network printing:
Full software installation
●Windows 2003 Server (64-bit)
●Windows XP (32-bit and 64-bit)
●Windows Vista (32-bit and 64-bit)
●Mac OS X V10.2.8, V10.3, V10.4 and later
Printer driver only
●Windows 2000
●Windows 2003 Server (32-bit)
●Linux (Web only)
●UNIX model scripts (Web only)
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems
and...

USB connection
NOTE:Do not connect the USB cable before installing the software. The installation program will notify
you when the USB cable should be connected.
This product supports a USB 2.0 connection. You must use an A-to-B type USB cable for printing.
ENWWUSB connection 35
 

Supported network protocols
The product supports the TCP/IP network protocol. It is the most widely used and accepted networking
protocol. Many networking services utilize this protocol. This product also supports IPv4 and IPv6. The
following tables list the networking services/protocols that are supported on the product.
Table 5-1  Printing
Service nameDescription
port9100 (Direct Mode)Printing service
Line printer daemon (LPD)Printing service
ws-print Microsoft plug-and-play printing solution
Table 5-2...

Service nameDescription
BOOTP (bootstrap protocol)For Automatic IP address assignment. BOOTP server
provides the product with an IP address. Requires
administrator to input the product MAC hardware address on
BOOTP server in order for product to obtain an IP address from
that server.
Auto IP For Automatic IP address assignment. If neither a DHCP
server nor a BOOTP server is present, this service allows the
product to generate a unique IP address.
Table 5-4  IP addressing (continued)
ENWW Supported...

Configure the product on the network
To configure network parameters on the product, use the product control panel, or the embedded Web
server. For Windows operating systems, use the HP ToolboxFX software. For Mac OS X, use the
Utility button.
Set up the product on the network
Hewlett-Packard recommends that you use the HP software installer on the product CD-ROM to set up
printer drivers for networks.
NOTE:You must connect the printer to your network prior to starting the software installation.
This...

IP address
You can configure the IP address manually or automatically via DHCP, BootP, or AutoP.
Manual configuration
1.On the control-panel menu, press OK.
2.Use the Left arrow (
) or the Right arrow () button to select Network config., and then press
OK.
3.Use the Left arrow (
) or the Right arrow () button to select TCP/IP config, and then press
OK.
4.Use the Left arrow (
) or the Right arrow () button to select Manual, and then press OK.
5.Press the Right arrow (
) button to increase the value for...

Show or hide the IP address on the control panel
NOTE:When Show IP address is On, the IP address will alternately appear on the control-panel
display with the print-cartridge-status gauges.
1.On the control-panel menu, press OK.
2.Use the Left arrow (
) or the Right arrow () button to select Network config., and then press
OK.
3.Use the Left arrow (
) or the Right arrow () button to select Show IP address, and then press
OK.
4.Use the Left arrow (
) or the Right arrow () button to select Yes or No, and...