HP Color LaserJet CP3505 User Manual

Print Quality sub-menu
Use this menu to adjust all aspects of print quality, including calibration, registration, and color half tone
settings.
Menu itemValuesDescription
ADJUST COLORHIGHLIGHTS
MIDTONES
SHADOWS
RESTORE COLOR
VALUESModifies the half tone settings for each color. The default for each color
is 0.
SET REGISTRATIONPRINT TEST PAGE
SOURCE
ADJUST TRAY 1
ADJUST TRAY 2
ADJUST TRAY 3Shifts the margin alignment to center the image on the page from top to
bottom, and left to right. You can also align...

Menu itemValuesDescription
CREATE CLEANING
PAGE
(HP Color LaserJet
CP3505 and CP3505n
only) Prints a cleaning page to be used for cleaning the printer. This page
contains instructions for processing the cleaning page. See 
Clean theprinter on page 126 for more information.
PROCESS
CLEANING PAGE
(HP Color LaserJet
CP3505dn and
CP3505x only)  For duplexing printers, this command creates and processes the
cleaning page. For non-duplexing printers, after the cleaning page is
loaded in tray 1, this menu item...

Menu itemValuesDescription
AUTO will reset the printer to the factory default setting. The
default is AUTO.
Select MOSTLY COLOR PAGES if nearly all of your print
jobs are color with high page coverage.
Select MOSTLY BLACK PAGES if you print mostly
monochrome print jobs, or a combination of color and
monochrome print jobs.
TRAY BEHAVIORUSE REQUESTED TRAY
MANUALLY FEED
PROMPT
PS DEFER MEDIA
USE ANOTHER TRAY
SIZE/TYPE PROMPT
DUPLEX BLANK PAGESSpecifies settings for the tray selection behavior. (Use this...

Menu itemValuesDescription
SATURDAY
SUNDAY
OPTIMUM SPEED/ENERGY
USAGEFASTER FIRST PAGE
SAVE ENERGYAffects print speed by defining whether the fuser cools
between jobs. When FASTER FIRST PAGE  is selected, the
fuser does not cool, and printing is faster. When  SAVE
ENERGY  is selected, the fuser cools between jobs. The
default is  FASTER FIRST PAGE .
DISPLAY BRIGHTNESS1–10Adjusts the brightness of the printer control panel. The
default is 5. See 
Set the Display Brightness featureon page 28....

Menu itemValuesDescription
RAM DISKAUTO
OFFDetermines how the RAM disk feature is configured. Select
AUTO to allow the printer to determine the optimal RAM disk
size based on the amount of available memory. OFF
disables the RAM disk, but a minimal RAM disk is still
available. The default is AUTO.
LANGUAGEA list of available languages
appears.Sets the default control-panel language.
See 
Language feature on page 31 for more information.
I/O sub-menu
Use the I/O menu to configure the printer input/output...

Menu itemValuesDescription
ON
24 Chapter 2   Control panelENWW
 

Diagnostics menu
Use the DIAGNOSTICS menu to run tests that can help identify and solve problems with the printer.
Menu itemDescription
PRINT EVENT LOGPrints an event log that shows the last 50 entries in the printer event log, starting with the most recent.
SHOW EVENT LOGShows the last 50 printer events on the control-panel display, starting with the most recent.
PQ
TROUBLESHOOTINGPrints a series of print-quality assessment pages that help troubleshoot many print-quality problems.
PRINT DIAGNOSTICS...

Change control-panel configuration settings
Use the printer control panel to make changes to default printer configuration settings, such as tray size
and type, sleep delay time, printer personality (language), and jam recovery.
You can also gain access to the printer control panel from a computer by using the Settings page of
the embedded Web server. The computer shows the same information as the control panel. For more
information, see 
Use the embedded Web server on page 113 .
CAUTION: Configuration...

Set the Manually Feed Prompt feature
1.Press  Menu.
2. Press 
 to highlight  CONFIGURE DEVICE , and then press .
3. Press 
 to highlight  SYSTEM SETUP , and then press .
4. Press 
 to highlight  TRAY BEHAVIOR , and then press .
5. Press 
 to highlight  MANUALLY FEED PROMPT , and then press .
6. Press 
 or  to select  ALWAYS  or UNLESS LOADED .
7. Press 
 to save the selected behavior, and then press  Menu to return to the  Ready state.
Set the PS Defer Media feature
1.Press  Menu.
2. Press 
 to...

6.Press  or  to select  DISPLAY  or DO NOT DISPLAY .
7. Press 
 to save the selected behavior, and then press  Menu to return to the  Ready state.
Set the Duplex Blank Pages feature
1.Press  Menu.
2. Press 
 to highlight  CONFIGURE DEVICE , and then press .
3. Press 
 to highlight  SYSTEM SETUP , and then press .
4. Press 
 to highlight  TRAY BEHAVIOR , and then press .
5. Press 
 to highlight  DUPLEX BLANK PAGES , and then press .
6. Press 
 or  to select  AUTO or YES .
7. Press 
 to save the selected...