HP Mp3130w Digital Projector Users Guide
Have a look at the manual HP Mp3130w Digital Projector Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
User’s Guide71 Reference Noise level 37 dBA EnvironmentOperating: Temperature: 10 to 35°C (50 to 95°F) Humidity: 80% RH max, non-condensing Altitude: up to 3,000 m (10,000 ft), up to 25°C (77°F) Storage: Temperature: -20 to 55°C (-4 to 131°F) Humidity: 80% RH max, non-condensing Altitude: up to 12,000 m (40,000 ft) Identifying the projector specifications (continued)
72User’s Guide Reference Analog Video Mode Compatibility Compatibility Resolution V-Sync (Hz) H-Sync (kHz) VGA 640 x 350 70 31.5 640 x 350 85 37.9 640 x 400 85 37.9 640 x 480 60 31.5 640 x 480 72 37.9 640 x 480 75 37.5 640 x 480 85 43.3 720 x 400 70 31.5 720 x 400 85 37.9 SVGA 800 x 600 56 35.2 800 x 600 60 37.9 800 x 600 72 48.1 800 x 600 75 46.9 800 x 600 85 53.7 XGA 1024 x 768 60 48.4 1024 x 768 70 56.5 1024 x 768 75 60.0 1024 x 768 85 68.7 SXGA 1280 x 1024 60 63.98 1280 x 1024 75 79.98 SXGA+ 1400 x 1050 60 63.98 MAC LC 13 640 x 480 66.66 34.98 MAC II 13 640 x 480 66.68 35
User’s Guide73 Reference MAC 16 832 x 624 74.55 49.725 MAC 19 1024 x 768 75 60.24 MAC 1152 x 870 75.06 68.68 MAC G4 640 x 480 60 31.35 MAC G4 640 x 480 120 68.03 MAC G4 1024 x 768 120 97.09 i Mac DV 640 x 480 117 60 i Mac DV 800 x 600 95 60 i Mac DV 1024 x 768 75 60 i Mac DV 1152 x 870 75 68.49 i Mac DV 1280 x 960 75 75 i Mac DV 1280 x 1024 75 90.9 Analog Video Mode Compatibility (continued) Compatibility Resolution V-Sync (Hz) H-Sync (kHz)
74User’s Guide Reference Digital Video Mode Compatibility Compatibility Resolution V-Sync (Hz) H-Sync (kHz) VGA 640 x 350 70 31.5 640 x 350 85 37.9 640 x 400 85 37.9 640 x 480 60 31.5 640 x 480 72 37.9 640 x 480 75 37.5 640 x 480 85 43.3 720 x 400 70 31.5 720 x 400 85 37.9 SVGA 800 x 600 56 35.2 800 x 600 60 37.9 800 x 600 72 48.1 800 x 600 75 46.9 800 x 600 85 53.7 XGA 1024 x 768 60 48.4 1024 x 768 70 56.5 1024 x 768 75 60.0 SXGA 1280 x 1024 60 63.98
User’s Guide75 Reference Safety Information Safety precautions ÅWARN I N G: Observe the following precautions to reduce the risk of injury. ■ To prevent eye injury, do not look directly into the lens when the lamp is on. Do not point the laser light into anyone’s eyes. ■To prevent electrical shock, do not expose the projector to rain or moisture. Do not open the projector except as instructed by the manual. ■To reduce the risk of fire or electrical shock, do not allow small metallic objects to get inside the projector. Carry the projector only in its protective case, and do not store paper clips or other small objects inside the case. ■Allow the projector to cool before removing any cover and touching internal components, as instructed by the manual. ■Keep paper and other combustible material away from the projector lens to prevent the possibility of fire. ■Use only an approved power cord rated for the voltage and current marked on the product label. Do not overload any outlet or extension cord. Laser safety The laser pointer on the remote control is certified as Class 2 laser device according to the U.S. Department of Health and Human Services Radiation Performance Standard and International Standards IEC 825/IEC 825-1 (EN60825/EN60825-1). This device is not considered harmful, but the following precautions are recommended: ■Ensure proper use by reading and following the instructions carefully. ■If the unit requires service, contact an authorized HP service center. ■Do not attempt to make any adjustment to the unit. ■Avoid direct exposure to the laser beam.
76User’s Guide Reference LED safety The infrared ports located on the digital projector and remote control are classified as Class 1 LED devices according to International Standard IEC 825-1 (EN60825-1). This device is not considered harmful, but the following precautions are recommended: ■If the unit requires service, contact an authorized HP service center. ■Do not attempt to make any adjustment to the unit. ■Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is invisible light and cannot be seen. ■Do not attempt to view the infrared LED beam with any type of optical device. Mercury safety ÅWARN I N G: This digital projector lamp contains a small amount of mercury. If the lamp breaks, adequately ventilate the area where the breakage occurred. Disposal of the lamp might be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance at http://www.eiae.org.
User’s Guide77 Reference Regulatory Information This section presents information that shows how your digital projector complies with regulations in certain regions. Any modifications to your digital projector not expressly approved by HP could void the authority to operate the digital projector in these regions. U.S.A. This digital projector has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This digital projector generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it can cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this digital projector does cause harmful interference to radio or television reception (which can be determined by unplugging the unit), try the following: ■Reorienting or relocating the receiving antenna. ■Relocating the digital projector with respect to the receiver. ■Connecting the digital projector’s power cord to another power outlet. Connections to peripheral devices To maintain compliance with FCC Rules and Regulations, use properly shielded cables with this device. For more information, consult your dealer, an experienced radio/television technician, or, prepared by the Federal Communications Commission, How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. At the first printing of this manual, the telephone number was 202-512-1800. Canada This Class B digital apparatus complies with Canadian ICES-003.
User’s Guide79 Reference International For regulatory identification purposes, your product is assigned a regulatory model number. The regulatory model number for your product is listed in the declaration of conformity. This regulatory number is different from the marketing name and product number. DECLARATION OF CONFORMITY According to ISO/IEC Guide 22 and EN 45014 Manufacturers Name: Hewlett Packard Company Manufacturers Address:Hewlett Packard Company Digital Projection & Imaging 1000 NE Circle Blvd. Corvallis, OR 97330-4239 Declares, that the product(s): Product Name: Digital Projector Model Number(s): mp3130/mp3135 series Regulatory Model:CRVSB-03AP Conforms to the following product specifications: Safety:IEC 60950:1999/ EN 60950:2000 IEC 60825-1:1993 +A1 / EN 60825-1:1994 +A11 Class 1 LED GB4943-1995 EMC: EN 55022: 1998 Class B [1] CISPR 24:1997 / EN 55024: 1998 IEC 61000-3-2:1995 / EN 61000-3-2:2000 IEC 61000-3-3:1994 / EN 61000-3-3:1995+A1:2001 GB9254-1998 FCC Title 47 CFR, Part 15 Class B/ANSI C63.4:1992 AS/NZS 3548:1995 Rules and Regulations of Class B Supplementary information: The product herewith complies with the requirements of following Directives and carries the CE marking accordingly: -Low Voltage Directive: 73/23/EEC -EMC Directive: 89/336/EEC [1] The product was tested in a typical configuration with Hewlett Packard Personal Computer peripherals. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Corvallis, Oregon, September 1, 2003 Steve Brown, General Manager European Contact for regulatory topics only: Hewlett Packard GmbH, HQ-TRE, Herrenberger Straße 140, 71034 Boeblingen, Germany. (FAX:+49-7031-143143). USA Contact: Hewlett Packard Co., Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA 94304. Phone: (650) 857-1501.