HP P2055 Manual
Have a look at the manual HP P2055 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5.Rotate the drive end of the roller assembly out and away from the product. Figure 6-12 Remove the pickup roller assembly; Tray 2 (4 of 5) 6.Remove the pickup roller. CAUTION: The two rollers on the end of the assembly ar e not captive and can slip off of the roller shaft. Do not lose the rollers when you remove the assembly. Figure 6-13 Remove the pickup roller; Tray 2 (5 of 5) ENWW Rollers and pads 109
Separation-pad assembly; Tray 2 CAUTION:Do not touch the pad surface unless you are replacing the pad. Skin oils on the pad can cause paper-pickup problems. 1. If the Tray 2 cassette has not yet been removed to service the product, remove the cassette. See Tray 2 cassette on page 103. 2. Remove two screws (callout 1) Figure 6-14 Remove the separation-pad assembly; Tray 2 (1 of 2) 1 3.Remove the separation-pad assembly. Figure 6-15 Remove the separation-pad assembly; Tray 2 (2 of 2) 110 Chapter 6 Removal and replacement ENWW
Transfer roller CAUTION:Do not touch the sponge surface of the roller unless you are replacing the roller. Skin oils on the roller can cause print-quality problems. Always wear latex gloves when handling a tran sfer roller for reinstallation or replacement. 1.Press the print-cartridge door button (callout 1), and then open the print-cartridge door. Figure 6-16 Remove the transfer roller (1 of 5) 1 2.Use your finger to raise the sheet-metal flap, and th en rotate it toward the Tray 1 pickup roller cover. Figure 6-17 Remove the transfer roller (2 of 5) ENWW Rollers and pads 111
3.Before you proceed, note the location of the two tabs on the transfer-roller right-side locking clip. Figure 6-18 Remove the transfer roller (3 of 5) 4.Release two tabs on the right-side locking clip, lift the roller up, and then slide it toward the right side of the product to release the left end of the shaft. Figure 6-19 Remove the transfer roller (4 of 5) 2 1 112 Chapter 6 Removal and replacement ENWW
5.Remove the transfer roller. CAUTION: The black locking clip on the right side of the transfer-roller shaft is not captive. Do not lose the locking clip when you remove the transfer roller. Figure 6-20 Remove the transfer roller (5 of 5) ENWW Rollers and pads 113
External panels, covers, and doors NOTE:Your product might not appear exactly as the on e shown in the photos in this chapter. For example, the color of the external panels and covers might be different than your product. However, the procedures in this chapter are valid for both th e HP LaserJet P2035 and the HP LaserJet P2055. DIMM door (HP LaserJet P2050 Series only) 1.Open the DIMM door. Figure 6-21 Remove the DIMM door (1 of 2; HP LaserJet P2050 Series only) 2.Pull the DIMM door away from the product to remove it. Figure 6-22 Remove the DIMM door (2 of 2; HP LaserJet P2050 Series only) 114 Chapter 6 Removal and replacement ENWW
Right cover CAUTION:The power switch can be dislodged when the ri ght cover is removed. Be careful when you remove the cover. If the switch is dislodged, see Reinstall the right cover on page 117 . 1. Press the print-cartridge door button (callout 1), and then open the print-cartridge door. Figure 6-23 Remove the right cover (1 of 5) 1 2.Lift the rear door latch (callout 2), and then open the rear door. Figure 6-24 Remove the right cover (2 of 5) 2 ENWW External panels, covers, and doors 115
3.Before you proceed, note of the locations of the mounting tabs on the right cover. Figure 6-25 Remove the right cover (3 of 5) 4.Release three tabs (callout 3). Figure 6-26 Remove the right cover (4 of 5) 3 116 Chapter 6 Removal and replacement ENWW
5.Carefully slide the cover toward the fron t of the product, and then remove it. Figure 6-27 Remove the right cover (5 of 5) Reinstall the right cover If the power switch is disl odged when the cover is removed, replace it before installing the right cover. Figure 6-28 Reinstall the right cover ENWW External panels, covers, and doors 117
Left cover 1.Press the print-cartridge door button (callout 1), and then open the print-cartridge door. Figure 6-29 Remove the left cover (1 of 4) 1 2.Grasp the top front of the cover, and then gently separ ate the cover from the product. Figure 6-30 Remove the left cover (2 of 4) 118 Chapter 6 Removal and replacement ENWW