HP Pavilion 10 F100 Notebook Pc Series User Manual

							●PC screen only: View the screen image on the computer only.
●Duplicate: View the screen image simultaneously on 
both the computer and the external
device.
●Extend: View the screen image extended across 
both the computer and the external
device.
●Second screen only: View the screen image on the external device only.
Each time you press f4, the display state changes.
NOTE:For best results, especially if you choose the “Extend” option, adjust the screen
resolution of the external device, as follows. From the Start screen, type control panel, and
then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust
screen resolution.
Setting up HDMI audio
HDMI is the only video interface that supports high-definition video and audio. After you connect an
HDMI TV to the computer, you can then turn on HDMI audio by following these steps:
1.From the Windows desktop, right-click the Speakers icon in the notification area, at the far right
of the taskbar, and then select Playback devices.
2.On the Playback tab, select the name of the digital output device.
3.Click Set Default, and then click OK.
To return the audio stream to the computer speakers:
1.From the Windows desktop, right-click the Speakers icon in the notification area, at the far right
of the taskbar, and then click Playback devices.
2.On the Playback tab, click Speakers.
3.Click Set Default, and then click OK.
Using video 23 
						

							5 Navigating the screen
You can navigate the computer screen in the following ways:
●Touch gestures
●Keyboard and mouse
Touch gestures can be used on your computer TouchPad.
NOTE:An external USB mouse (purchased separately) can be connected to one of the USB ports
on the computer.
Review the Windows Basics guide included with your computer. The guide provides information
about common tasks using the TouchPad or the keyboard.
Select computer models have special action keys or hot key functions on the keyboard to perform
routine tasks.
Using the TouchPad and gestures
The TouchPad allows you to navigate the computer screen and control the pointer by using simple
finger movements. You can customize the touch gestures by changing settings, button configurations,
click speed, and pointer options. You can also view demonstrations of TouchPad gestures.
From the Start screen, type control panel, select Control Panel, and then select Hardware and
Sound. Under Devices and Printers, select Mouse.
TIP:Use the left and right buttons on the TouchPad as you would use the corresponding buttons on
an external mouse.
NOTE:TouchPad gestures are not supported in all apps.
24 Chapter 5   Navigating the screen 
						

							Tapping
To make an on-screen selection, use the tap function on the TouchPad.
●Point to an item on the screen, and then tap one finger on the TouchPad zone to make a
selection. Double-tap an item to open it.
Using the TouchPad and gestures 25 
						

							Scrolling
Scrolling is useful for moving up, down, or sideways on a page or image.
●Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or
right.
2-finger pinch zoom
2-finger pinch zoom allows you to zoom out or in on images or text.
●Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers
together.
●Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers
apart.
26 Chapter 5   Navigating the screen 
						

							2-finger click
2-finger click allows you to make menu selections for an object on the screen.
NOTE:Using 2-finger click is the same action as using right-click with the mouse.
●Place two fingers on the TouchPad zone and press down to open the options menu for the
selected object.
Rotating (select models only)
Rotating allows you to turn items such as photos.
●Point to an object, and then anchor the forefinger of your left hand in the TouchPad zone. Using
your right hand, slide your forefinger in a sweeping motion from 12 o’clock to 3 o’clock. To
reverse the rotation, move your forefinger from 3 o’clock to 12 o’clock.
NOTE:Rotate is intended for specific apps where you can manipulate an object or image. Rotate
may not be functional for all apps.
Using the TouchPad and gestures 27 
						

							Flicking (select models only)
Flicking allows you to navigate through screens or quickly scroll through documents.
●Place three fingers on the TouchPad zone and flick your fingers in a light, quick motion up,
down, left or right.
Edge swipes
Edge swipes allow you to perform tasks such as changing settings and finding or using apps.
Right-edge swipe
The right-edge swipe reveals the charms, which let you search, share, start apps, access devices, or
change settings.
●Swipe your finger gently from the right edge to reveal the charms.
28 Chapter 5   Navigating the screen 
						

							Left-edge swipe
The left-edge swipe accesses your recently opened apps so that you can switch between them
quickly.
●Swipe your finger gently from the left edge of the TouchPad.
Top-edge swipe
The top-edge swipe displays app command options that allow you to customize apps.
IMPORTANT:When an app is active, the top-edge gesture varies depending on the app.
●Gently swipe your gently from the top edge to reveal the app command options.
Using the TouchPad and gestures 29 
						

							Using the keyboard and mouse
The keyboard and mouse allow you to type, select items, scroll and to perform the same functions as
you do using touch gestures. The keyboard also allows you to use action keys and hot keys to
perform specific functions.
TIP:The Windows key  on the keyboard allows you to quickly return to the Start screen from
an open app or the Windows desktop. Pressing the Windows key again will return you to the previous
screen.
NOTE:Depending on the country or region, your keyboard may have different keys and keyboard
functions than those discussed in this section.
Using the keys
You can quickly access information or perform functions by using certain keys and key combinations.
Using the action keys
An action key performs an assigned function. The icon on each of the f1 through f4 keys, the f5 key
(select models only), and the f6 through f12 keys illustrates the assigned function for that key.
To use an action key function, press and hold the key.
CAUTION:Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the
computer from operating properly.
The action key feature is enabled at the factory. You can disable this feature in Setup Utility (BIOS).
See 
Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) on page 46 for
instructions on opening Setup Utility (BIOS), and then follow the instructions at the bottom of the
screen.
After you have disabled the action key feature, you can still perform each function by pressing the fn
key in combination with the appropriate action key.
Icon Key Description
f1Opens Help and Support, which provides tutorials, information about the Windows
operating system and your computer, answers to questions, and updates to your
computer.
Help and Support also provides automated troubleshooting tools and access to
support.
f2Decreases the screen brightness incrementally as long as you hold down the key.
f3Increases the screen brightness incrementally as long as you hold down the key.
f4Switches the screen image between display devices connected to the system. For
example, if a monitor is connected to the computer, repeatedly pressing this key
alternates the screen image from the computer display to the monitor display to a
simultaneous display on both the computer and the monitor.
f5On select models, turns the radiance backlight keyboard feature off or on.
NOTE:To conserve battery power, turn off this feature.
30 Chapter 5   Navigating the screen 
						

							Icon Key Description
f11Mutes or restores speaker sound.
f9Decreases speaker volume incrementally as long as you hold down the key.
f10Increases speaker volume incrementally as long as you hold down the key.
f6Plays the previous track of an audio CD or the previous section of a DVD or a BD.
f7Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD.
f8Plays the next track of an audio CD or the next section of a DVD or a BD.
f12Suspends the computer’s wireless signal.
Using Windows shortcut keys
Windows provides shortcuts so that you can perform actions quickly. Press the Windows key 
alone or in combination with a specific key to perform a designated action.
For commonly used shortcuts, use the 
Windows Basics guide.
Using the hot keys
A hot key is a combination of the fn key and the esc key, or the spacebar.
To use a hot key:
▲Briefly press the fn key, and then briefly press the second key of the combination.
Using the keyboard and mouse 31 
						

							6 Managing power
Your computer can operate on either battery power or external power. When the computer is running
on battery power only and an AC power source is not available to charge the battery, it is important to
monitor and conserve the battery charge. Your computer supports an optimal power plan to manage
how your computer uses and conserves power so that computer performance is balanced with power
conservation.
Initiating Sleep and Hibernation
Microsoft® Windows has two power-saving states, Sleep and Hibernation.
●Sleep—The Sleep state is automatically initiated after a period of inactivity when running on
battery power or on external power. Your work is saved to memory, allowing you to resume your
work very quickly. You can also initiate Sleep manually. For more information, see 
Manually
initiating and exiting Sleep on page 33.
●Hibernation—The Hibernation state is automatically initiated if the battery reaches a critical level.
In the Hibernation state, your work is saved to a hibernation file and the computer powers down.
NOTE:You can manually initiate Hibernation. See Manually initiating and exiting Sleep
on page 33 and Manually initiating and exiting Hibernation (select models only) on page 33.
CAUTION:To reduce the risk of possible audio and video degradation, loss of audio or video
playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a
disc or an external media card.
NOTE:You cannot initiate any type of networking connection or perform any computer functions
while the computer is in the Sleep state or in Hibernation.
32 Chapter 6   Managing power