HP Pavilion 10 J000 X2 Detachable Pc User Manual

software must be kept up to date. It is strongly recommended that you upgrade the security software
trial offer or purchase the software of your choice in order to fully protect your tablet.
Using antivirus software
Computer viruses can disable programs, utilities, or the operating system, or cause them to function
abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any
damage they have caused.
To provide ongoing protection against newly discovered viruses,...

If you have installed third-party software after you purchased your tablet, regularly update the
software. Software companies provide software updates to their products to correct security problems
and improve functionality of the software.
Securing your wireless network
When you set up your wireless network, always enable security features. For more information, see
Protecting your WLAN on page 16.

Regularly back up your software applications and information to protect them from being permanently
lost...

10 Using Setup Utility (BIOS) and HP PC
Hardware Diagnostics (UEFI)
Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup
Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the tablet,
and the amount of system and extended memory.
Starting Setup Utility (BIOS)
You can open Setup Utility using the tablet only or an...

1.Connect an optional USB keyboard (purchased separately) to the tablet.
2.Turn on or restart the tablet, quickly press esc, and then press f10.
Downloading a BIOS update
CAUTION:To reduce the risk of damage to the tablet or an unsuccessful installation, download and
install a BIOS update only when the tablet is connected to reliable external power using the AC
adapter. Do not download or install a BIOS update while the tablet is running on battery power,
docked in an optional docking device, or...

Using HP PC Hardware Diagnostics (UEFI)
HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run
diagnostic tests to determine whether the tablet hardware is functioning properly. The tool runs
outside the operating system so that it can isolate hardware failures from issues that are caused by
the operating system or other software components.
To start HP PC Hardware Diagnostics UEFI:
1.Turn on or restart the tablet, quickly press the Windows button on the...

11 Backing up, restoring, and recovering
This chapter provides information about the following processes:
●Creating recovery media and backups
●Restoring and recovering your system
Creating recovery media and backups
1.After you successfully set up the tablet, create HP Recovery media. This step creates a backup
of the HP Recovery partition on the tablet. The backup can be used to reinstall the original
operating system in cases where the hard drive is corrupted or has been replaced.
HP Recovery media...

external optical drive, it must be connected directly to a USB port on the tablet; the drive cannot
be connected to a USB port on an external device, such as a USB hub.
●You can also use a high-quality blank USB flash drive to create recovery media.
●Be sure that the tablet is connected to AC power before you begin creating the recovery media.
●The creation process can take up to an hour or more. Do not interrupt the creation process.
●If necessary, you can exit the program before you have finished...

●System Recovery—Reinstalls the original operating system, and then configures the settings for
the programs that were installed at the factory.
●Factory Reset—Restores the tablet to its original factory state by deleting all information from
the hard drive and re-creating the partitions. Then it reinstalls the operating system and the
software that was installed at the factory.
The HP Recovery partition (select models only) allows System Recovery and Minimized Image
Recovery.
What you need to know
●HP...

1.If possible, back up all personal files.
2.Insert the HP Recovery media that you created, and then restart the tablet.
NOTE:If the tablet does not automatically restart in HP Recovery Manager, change the tablet
boot order. See 
Changing the tablet boot order on page 49.
3.Follow the on-screen instructions.
Changing the tablet boot order
If tablet does not restart in HP Recovery Manager, you can change the tablet boot order, which is the
order of devices listed in BIOS where the tablet looks for startup...

12 Specifications
Input power 
The power information in this section may be helpful if you plan to travel internationally with the tablet.
The tablet operates on DC power, which can be supplied by an AC or a DC power source. The AC
power source must be rated at 100–240 V, 50–60 Hz. Although the tablet can be powered from a
standalone DC power source, it should be powered only with an AC adapter or a DC power source
supplied and approved by HP for use with this tablet.
The tablet can operate on DC power...