Huawei E5330bs2 User Manual

 
9 
Charging the Battery 
If the Mobile WiFi has not been used for a long time or if the battery is fully depleted, the 
Mobile WiFi may not power on immediately after the charger is plugged in. Please charge the 
battery for a while before attempting to power on the Mobile WiFi. 
Method 1: Use the charger to charge the device 
Note: 
 Only use chargers compatible with the 
Mobile WiFi and provided by a 
designated manufacturer. Use of an 
incompatible charger or one from an 
unknown manufacturer may...

 
10 
 The Mobile WiFi’s charger model is HW-050100XYW. X and Y represent letters or 
numbers that vary by region. For details about the specific charger model, contact an 
authorized dealer. 
Method 2: Charge the device through a computer connection 
Use the data cable provided with your device to connect the Mobile WiFi to the computer. 
  

 
11 
Turning on the Mobile WiFi 
Press and hold the  button until indicator 
lights up, indicating that the Mobile WiFi is 
turned on.   
You can log in to the web management page 
and turn the fast boot function on or off. This 
function greatly reduces the Mobile WiFis 
boot-up time. 
Note: 
 Press and hold the 
 button to turn 
off the Mobile WiFi. 

 
12 
Verifying the PIN 
If the Mobile WiFis network parameters have been correctly configured but you cannot access 
the Internet after powering it on, PIN verification may be enabled. Log in to the web 
management page and enter the PIN when prompted. To avoid entering the PIN every time 
you power on the Mobile WiFi, disable PIN verification from the web management page.   
The PIN/PUK is delivered with your SIM card. For more details, contact your service provider.  

 
13 
Connecting to the Internet 
Using a 3G or 2G Network 
The Mobile WiFis management parameters have been preset according to your operators 
requirements. 
If data is transmitted, the Mobile WiFi will automatically connect to the Internet. If data is not 
transmitted for a period of time, the Mobile WiFi will automatically disconnect from the 
network connection. 
Note: 
 You can log in to the web management page and enable or disable the automatic dialing 
while roaming function. If this function is...

 
14 
Using a Wi-Fi Network 
1.  Ensure that the Internet WLAN function is enabled. 
2.  The Mobile WiFi automatically connects to a Wi-Fi hotspot set by your service provider or 
yourself. When the Mobile WiFi is connected to a Wi-Fi network, 
 is blue. 
Note: 
 After connecting to a Wi-Fi network, the Mobile WiFi automatically reconnects to the 
network the next time you are under that networks coverage. 
 For details about adding Wi-Fi hotspots, see “Adding a Wi-Fi Hotspot”.  

 
15 
Logging In to the Web Management Page 
1.  Make sure the connection between the Mobile WiFi and the Wi-Fi device or computer is 
working normally. 
2.  Open the browser, and enter http://192.168.8.1 in the address box. 
Note: 
If the IP address conflicts with other IP addresses on the network, the IP address of the 
Mobile WiFi automatically changes. Please try http://192.168.9.1. If you cannot log in, 
contact an authorized dealer. 
3.  Enter the user name and password to log in to the web...

 
16 
Battery Saving Mode 
If the Mobile WiFi has been inactive for some time, the Mobile WiFi enters the standby mode, 
the power indicator () blinks slowly and the other indicators are off. Pressing the  
button causes the display screen to light up. 
When the Mobile WiFi is being powered only by the battery, you can choose to enable or 
disable the automatic Wi-Fi turnoff function. If this function is enabled and if no Wi-Fi devices 
access the Mobile WiFi for a period of time, the Wi-Fi turns off...

 
17 
Turning Internet WLAN On or Off   
You can log in to the Mobile WiFis web management page to enable or disable the Internet 
WLAN. 
Note: 
 After the Internet WLAN function is enabled, up to five Wi-Fi devices can be connected to 
the Mobile WiFi. 
Adding a Wi-Fi Hotspot 
1.  Log in to the web management page. 
2.  From the settings page, choose Internet WLAN. 
3.  Scan for Wi-Fi hotspots and connect to the desired one. 

 
18 
Connecting an Android Device to the Mobile WiFi Using a 2D 
Barcode 
1.  Search for HUAWEI Mobile WiFi in 
Google Play or HUAWEI App Center and 
download the app to your Android 
device. 
2.  Scan the 2D Barcode on the Mobile WiFi 
rear label using the HUAWEI Mobile WiFi 
App. 
 
Your Android device will then connect to the 
Mobile WiFi.