Hyundai H Lcd1918 Instruction Manual

ТЕЛЕВИЗОР ЦВЕТНОГО ИЗОБРАЖЕНИЯ 
ЖИДКОКРИСТАЛЛИЧЕСКИЙ  (LCD)
LCD TV
Руководство по эксплуатации 
Instruction manual
H-LCD1918
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Installation
Stand installation
Connection
ConnectionOutdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations  Teletext operations
OSD operation Picture setting (in TV mode)
PC setup (in VGA mode)
Sound setting
Channel setting
Timer setting
Function setting
General information
Troubleshooting Causes of interference...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
• Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.
•  Fasten the wheel of the product or shelf 
with wheels when installing this...

5
Installation
Stand installation
1. Cover an even stable surface with a soft 
cloth. Place the LCD TV unit facedown on the 
cloth. Prepare to put the stand in.
2. Fit the stand into the LCD TV unit stand 
socket until a click.
Downloaded From TV-Manual.com Manual” 

6
Operation
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources to the proper 
stereo audio input jacks ‘L’ and ‘R’. •  Connect the video source to the video 
input jack by RCA cable. •  When using the TV as a computer screen, 
connect the PC to the VGA jack from the 
monitor by the relevant cable. •  This unit has PC audio in jack. Connect 
this jack to PC main...

7
Operation
Control elements    
Front panel
Back panel
1. Power switch
2. HDMI input
3. Video input
4. Stereo audio input (Left+Right) 
for component video
5. Component video (YPbPr) input
6. Headphone jack
7. PC audio input
8. VGA (PC) input
9. Stereo audio input (Left+Right)
10. RF antenna input
11. Stereo audio output (R+L)
12. Video output 1. POWER button
2. TV/AV button
3. MENU button
4. VOL- button
5. VOL+ button
6. CH- button
7. CH+ button
8. IR sensor
9. Power indicator
1
2
3
4
5
6
7
8
9
10
11...

89
OperationOperation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  SOURCE/REVEAL button
4.  SIZE/ZOOM button
5.  MENU button
6.  ENTER button/cursor buttons (
//
/)
7.  VOL+/VOL- buttons
8.  SLEEP button
9.  CANCEL button
10. Green button 11. Red button 
12. TEXT button
13. HOLD button
14. INFO/INDEX button
15. 
 button
16.  button
17. RECALL button
18. EXIT button
19. CH+/CH- buttons
20. Not functional for this model
21. Not functional for this model
22. Yellow button
23. Blue button...

89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power. Press POWER button 
again to switch the unit into standby mode. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 button to cut off sound, press this 
button again or adjust volume to resume sound. •  Press SLEEP button repeatedly to set the 
sleep time. When sleep time is set, press this 
button to display the time...

10
Operation
•  Picture Mode: User/Standard/Soft/Vivid.
•  Contrast
•  Brightness
•  Saturation
•  Tint: adjust the tone of color when your 
system is in NTSC. •  Sharpness
•  Colour Temperature: Normal/Warm/Cool.
•  Advance:
DLC: dynamic luminance control.
BLE: black level extend.
DNR: dynamic noise reduction.
Picture setting (in PC mode)
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
CLOCK
PHASE
POSITION
COLOR TEMP.
AUTO ADJUST
•  Picture Mode: User/Standard/Soft/Vivid.
•  Contrast
•  Brightness
•  Clock:...